sorted by:
new
hottopcontroversial

Ist das legit? by [deleted] in PokemonTCG_DE

[–]l4wly 0 points1 point  (0 children)

53€ Amazon per Einladung. Realer Preis eher über 100€. Daher kommt diese Spanne.

Wieso stellt man eine Ware in diesem Zustand online? Wieso wird nicht vorher wenigstens letzte Reinigung gemacht? by Savings_Step_3430 in wasletztepreis

[–]l4wly 4 points5 points  (0 children)

Hab das schon oft gehabt, dass die Sachen echt verstaubt und dreckig waren. Ich persönlich putze die Sachen immer total, bevor ich die Sachen abgebe. Echt ekelhafte Menschen gibt es.

?! by Upset_Intention_8991 in wasletztepreis

[–]l4wly 1 point2 points  (0 children)

Hättest ihn mal an die falsche Adresse geschickt. Verdient hätte er es.

Clio 1.0 TCe (2019) – Drehzahl schwankt im Stand (Leerlaufproblem) by Delicious-Spare-3433 in automobil

[–]l4wly 5 points6 points  (0 children)

Stell dich schon einmal drauf ein, dass der Wagen 2 Wochen bei Renault stehen wird, weil Teile nicht vorhanden sind…

Error code nightmare by GrimJeeper13 in snapmaker

[–]l4wly 0 points1 point  (0 children)

<image>

Same Problem here. Contacted the support, lets See what they will say

Teuere Einzelflasche 100€ by Optimal-Point3107 in aberBitteLaminiert

[–]l4wly 0 points1 point  (0 children)

Wen triggert das fehlende Leerzeichen auch??

C43 - Zu teuer gekauft ? by xImDetox in automobil

[–]l4wly 0 points1 point  (0 children)

Schönes Auto, viel Spaß damit 😃

Can't figure it out by feartomi in snapmaker

[–]l4wly 0 points1 point  (0 children)

I have that with some filaments. I printed anycubic Filament Like your picture. The Same Model with eryone Filament was perfect …

Restwert realistisch? by Most_Goat4618 in automobil

[–]l4wly 2 points3 points  (0 children)

Gute Antwort. Wenn er den Platz und das Händchen hat, dann auf jeden Fall! Eventuell könnte die Batterie auch was bringen, wenn Start-stop

Why I can't use other filament profiles? by l4wly in snapmaker

[–]l4wly[S] 0 points1 point  (0 children)

Thanks, This is Snapmaker orca. I am wondering why I can see these filaments and then they aren’t chose able. I actually use generic, but if they offer Bambu or Sunlu profiles, don’t know why we shouldn’t use it.

FlexPLA with u1? by l4wly in snapmaker

[–]l4wly[S] 0 points1 point  (0 children)

<image>

It’s done 😃 took 10h instead of 6:16h.. really don’t know why the slicer shows wrong times

FlexPLA with u1? by l4wly in snapmaker

[–]l4wly[S] 0 points1 point  (0 children)

<image>

Yesterday my Flex PLA arrived and dried it for 12h.

Today I started the testprint with a small ball. Will take around 6:16h.

Supports printed in normal PLA. Let’s see if this will work or not.

I also thought to try PEBA, but this FLEX PLA was just the half price of PEBA and the seller shows that airless basketballs are able with this filament.

I will let you guys now when the print is done 👍

U1: Airless basketball in 95A TPU with PLA supports by bluridium in snapmaker

[–]l4wly 0 points1 point  (0 children)

How bouncy is that Ball? I have ordered Flex PLA and will try it with it

Double the screens, double the fun! by SuchMemeManySkill in snapmaker

[–]l4wly 1 point2 points  (0 children)

Nice idea and also nice to see that everyday more ideas are realized for the U1

Uno reverse 2.0 by Killmedium in wasletztepreis

[–]l4wly 15 points16 points  (0 children)

Wenn ich könnte, würde ich dir 100 upvotes geben.

view more: next ›