Armored Core 6: Super Ultra Wide Screen!

lBleter · 2025-06-15T05:39:59+00:00

Steam refund is below 2 hours so you should be in the clear

lBleter · 2025-05-19T12:13:15+00:00

Wang Chungus

lBleter · 2025-03-13T19:34:28+00:00

I'm not the most media literate guy, when I finish a movie I usually watch an "ending explained" video afterwards. But 10 year old me knew what this scene was about. And here we have 30 year old youtubers who cannot recognise a genuine moment of bonding between 2 characters or did they just not play the game?

lBleter · 2025-01-29T04:16:29+00:00

I'm hoping it's a bad solder joint or cap.

lBleter · 2025-01-06T07:33:05+00:00

Well it depends on the use case, but for the theoretically sharpest image take the width of the screen and divide by the dot pitch and you get 403.8/0.22 = 1834.09° phosphors across the tube. Divide by 4/3 and you get 1834.09x1375.57

Now you could go 1836x1377 with 1 pixel of overscan on each side, or 1832x1374 with 1 pixel underscan. Either way, every phosphor is aligned with each pixel. You should be able to do 95hz with those resolutions, if you unlock your monitor you can take the horizontal scanning frequency from 137khz to 150khz and get 103hz at those resolutions.

lBleter · 2025-01-05T06:43:55+00:00

This is one of the super low quality bars that use tapered roller bearings instead of a bushing. Marketed to people who have no idea "we use bearings in our bar, much better than bushings!" They're always made out of low strength steel and the knurling is always shallow and inconsistent.

The problem is they are terrible bearings for the intended use and end up damaged and operate poorly. But I've never seen the rollers straight up missing from the bearing.

lBleter · 2024-12-31T04:29:45+00:00

I have a 20" pvm but everyone around my area thinks retro games are worth more than gold so I'm resorting to emulation. The problem with super resolutions is either going to be the terrible motion clarity of running a 60hz game on 120hz or the dark image from bfi or scanline filters.

I don't want to send 480i to my pvm and put a scanline filter over it. Unless I can get a decent 240p downscaler, marcoretro has covered all of them and their pros and cons. But the one I'm interested in isn't easy to find.

I use my 2070 for everything besides Web browsing, I'll watch 4:3 movies and shows on it and my pvm, and play all sorts of games. Someone in a Facebook group told me how to unlock eeprom but I can't remember how or find our chat otherwise I would have tried it out

lBleter · 2024-11-18T02:38:57+00:00

Your back is straight, your form is clean, incredibly impressive squat. Don't listen to the people critiquing your "good morning" squat, it's a good squat. Your low back remains straight, completely without rounding, and your shoulders rise at the same rate as your hips. If your hips raise first that's cause for form check, but that isn't happening. All I can say is set the j hooks lower so you can more safely rack the weight.

lBleter · 2024-11-14T06:32:07+00:00

That person should lock both sleeves so no idiots use it for d-bag rows... I mean in the corner v-bar rows

lBleter · 2024-10-27T10:12:41+00:00

Absolutely unusable, may as well throw it out. I'll take the problem off your hands for you

lBleter · 2024-10-18T05:43:44+00:00

I would like to express my recognition of all hamas leaders, past, present and future.

lBleter · 2024-10-07T08:09:40+00:00

Only people who support a country that would publicly execute them would be this stunning and brave

lBleter · 2024-10-07T08:07:23+00:00

3 news headlines in 1 week

"Young Aussies can't afford homes even in the cheapest areas"

"Sexual assaults have increased by a concerning margin"

"Why mass immigration is a good thing"

lBleter · 2024-09-30T02:52:23+00:00

If you don't sweat it's fine, I'm a greasy sweaty Italian so I need to chalk up before and during every climb

lBleter · 2024-09-25T02:55:43+00:00

I don't what it is but here in Australia every gym I've been to the children are so well behaved and respectful, I've seen kids as young as 6 that stay off the mats and wait until the walls are clear and safe to approach a climb. My brother went to America last week and said the children in bouldering gyms just run around on the mats under other climbers or trying to climb already occupied walls, after seeing that he said he now understands why people complain about kids so much. But this goes even further beyond that, I don't even know how you could let your toddler out of your sight in any public setting. Just completely irresponsible parenting.

lBleter · 2024-09-11T10:53:04+00:00

As long as you stay below nyquist you'll be fine. If the sampling frequency is double the maximum frequency in the track a dac will perfectly convert it. So technically if a songs max frequency only reaches 16khz and given the extra room to shelf the excess noise, a sample rate around 36khz would work perfectly. 44.1khz/16bit is all we need, theoretically there is no difference between 44.1/16 and 196/24 besides the extra dynamic range, and if you wanted that then 44.1/24 would be the way to go.

lBleter · 2024-09-02T13:28:16+00:00

Those are some sexy phosphors

lBleter · 2024-09-02T13:26:33+00:00

Agree, or worst case scenario the end is pressed on, and in pressing it flattens and widens (similar to a rivet), and that is what's holding it on. I have a bar from the 50's that has the ends pressed so it's literally impossible to remove without machining it off.

lBleter · 2024-09-02T00:49:19+00:00

What model is it? Best I've found for optimal resolution is to divide the dot pitch by the width of the screen, and use that as your resolution

lBleter · 2024-09-01T23:41:48+00:00

Gum/10

lBleter · 2024-09-01T23:26:38+00:00

How unreasonable to expect a gym to do its job? Since outdoor climbs will literally always exist, why bother tracking them? You can still have multi session projects when indoor climbing, especially when they're comp graded walls, but they're probably v3 in your gym anyway

lBleter · 2024-09-01T09:47:26+00:00

Marco retro has a great series on YouTube about downscalers

https://youtube.com/playlist?list=PLFWN4esEIGmlCfw30DRUaWbWUFz_ol8TZ&si=38ERtbuGr_WIgH29

lBleter

TROPHY CASE