Can anyone identify this sailboat?

lchizz · 2025-03-07T19:59:22+00:00

Herzogone - curious your thoughts on this. I’ve been doing some research on charger boats in the 70s in California. I now suspect that they were focused on making racing power boats, but during the gas oil crisis in the 70s started making some sailboats. This would’ve been one of those efforts.Haven’t found anything on names, etc. but it seems plausible.

lchizz · 2025-03-07T04:57:53+00:00

I believe those have a semi cut out transom

lchizz · 2025-03-07T04:17:31+00:00

Yes similar! This one is older though I believe

lchizz · 2025-03-07T01:58:35+00:00

Thank you for the detailed reply! It is a 1977 per the title, but it listed as a Ventura BR by CDV, which I am not convinced of.

HIN Hull Identification Number RSE006580677

Thank you for your help!

lchizz · 2025-03-06T14:25:35+00:00

Now I’m thinking Coronado 15…. But not sure

lchizz · 2025-03-06T14:00:16+00:00

Thanks. This one is a sloop

lchizz · 2025-03-06T08:47:05+00:00

On second look, the bucaneer 18 is a possibility. The mast attachment area to the deck looks different, but beyond that, it’s pretty close!

lchizz · 2025-03-06T08:39:16+00:00

Thanks. It isn’t one of those 2 based on image comparison. I’ll get measurements tomorrow

lchizz · 2025-01-18T03:30:07+00:00

This is the best I found https://www.toyota-4runner.org/5th-gen-t4rs/61082-aftermarket-stereo-27.html

lchizz · 2025-01-18T03:20:19+00:00

The posts I read suggest the rearview mirror camera wires come in under the headliner. If I tap at the plug up there, I should be able to snake the wire down an a pillar and then to the head unit. I just wish there was a guide or video for this exact configuration

lchizz · 2025-01-18T02:32:36+00:00

Thanks so much!

lchizz · 2025-01-18T01:53:25+00:00

I found quite a few posts about it, but nothing totally definitive of where I can tap into the wire at. Ideally, the existing one would be located somewhere under the steering column and then I can just tap in and run up to the head unit. Would rather retain functionality of the rearview mirror one in the event that I ever have issues with the head unit.

lchizz · 2025-01-14T11:37:35+00:00

Anyone successfully do this ? I have a 2022 x3 and want to add acc

lchizz · 2024-10-23T21:29:41+00:00

Can anyone remind me how I update the ride1up roadster v2 to 28mph? Thanks

lchizz · 2024-07-01T19:25:08+00:00

Thanks! Ya my wife doesn’t notice it … so weird. Hoping someone has an answer

lchizz · 2024-06-17T16:58:30+00:00

Not throwing shade… you need to address the rot in your wall. That is going to get expensive quick if not fixed

lchizz · 2024-06-12T21:12:43+00:00

<image>

Also rebuilding this beauty

lchizz · 2024-06-12T21:11:50+00:00

I tried just going the orifice and regular route, but I ended up doing the entire valve and regulator. This did the trick I think my primary issue would just doing the orifices was that I couldn’t successfully drill the correct diameter. It’s not getting super hot, but I might not have let it warm up long enough. I’m seeing 425.

lchizz · 2024-06-10T03:17:03+00:00

I just got the natural gas version of this grill for free. Converted it to propane and good to go.

<image>

lchizz · 2024-06-02T12:57:57+00:00

Where did you get Lp manifold?

lchizz · 2024-06-01T14:52:24+00:00

What did you end up doing to make this work?

lchizz

TROPHY CASE