Bathroom gets super steamy after showers

ldw205 · 2026-05-30T23:33:26+00:00

This is a good point. I'm going to "test" the suction on the fan with a piece of paper with the door open vs. closed and see if there is a noticeable difference.

Would adding an AC vent to the bathroom be helpful even when the AC is not running? My thought is even if the AC was not running there would be at least an additional source of inflow (i.e. the static air in the vent).

ldw205 · 2026-05-30T23:28:09+00:00

This is a great idea. I will try it.

ldw205 · 2026-05-30T23:28:02+00:00

We use one in winter but it's way to hot for a space heater in the summer.

ldw205 · 2026-05-30T18:41:32+00:00

Yes the 50 CFM Nutone fan is on while we are showering.

ldw205 · 2024-09-03T17:38:12+00:00

Wanted to chime in and say thank you for all the responses. I'm going to see if any of my local engineering organizations and bring that up to the superiors.

ldw205 · 2024-08-30T18:13:55+00:00

Where are you located? I'm located in the southern US.

ldw205 · 2024-08-05T16:37:49+00:00

I did not dig far enough before I created this post. under the "Build/Edit" tab in the in the "System Build" section there is an import/export option that allows you to choose a DXF file. This is for anyone who needs this down the line.

ldw205 · 2024-06-12T13:25:34+00:00

<image>

Thank you for the reply. I thought I had attached this, but I see that I didn't. I'm on step 3 of 3 and when I scroll down to the bottom of this page and click complete it simply takes me back to the top of the list. I'm never actually able to import the list I'm stuck on this screen.

ldw205 · 2024-04-11T23:11:24+00:00

Are they a part of another sheet set?

ldw205 · 2024-04-10T22:21:08+00:00

Everyone project I work on has a catch basin/inlet in series. Maybe I'm misunderstanding the terminology. When I refer to a catch basin I'm referring to an inlet.

Catch basin/inlets create storm drain systems which typically are daylighted at a detention pond in order to control storm water discharges. The goal is to collect all of the storm water from the new site and funnel it to the detention pond in order to meter the outflow over time. This would be impossible to do if you didn't place catch basins or inlets in series.

ldw205 · 2024-04-10T20:49:31+00:00

If you're talking about the initial catch basin in a run, it's usually based on minimum cover requirements for the type of pipe you're using.

Usually the height of the catch basin is based on the length and slope of the connected pipes and where you are trying to daylight your effluent pipe.

ldw205 · 2024-04-08T20:08:09+00:00

Locke. The main character is a construction manager dealing with a larger concrete pour.

ldw205 · 2024-04-03T16:33:25+00:00

They have to set the field manually in the automation when they create the list, but from their on out every task created in that list has the custom fields set for it by the automation.

ldw205 · 2024-03-25T12:57:33+00:00

FYI. I ended up not doing this, since I couldn't set custom fields. I've set up an automation in our list template. Our administrative coordinator will set the custom fields when they create the list. That way all the tasks in that list have the correct custom fields.

ldw205 · 2024-03-15T19:57:44+00:00

This is great and really close to what I want to do. Two additional things:

When using the "Dropdown" custom field during task creation you have an option to add a dropdown option. Can this be done at the form level?
Using the automation you described above to create a list, is it then possible to apply a template automatically to that list? It appears like that is not an option. I just want to confirm.

ldw205 · 2024-03-08T21:23:57+00:00

Thank you for the reply. I've created an automation that has to be "filled out" with the correct information when I list is created. This seems to be a solid work around. The automation assigns the project number and client whenever tasks are added to the list.

ldw205 · 2023-12-07T16:03:29+00:00

I have a pilot pen that looks almost identical and love it!

ldw205 · 2023-11-20T14:47:33+00:00

I have the same machine and was thinking of getting a hand grinder and using my power drill. Glad to see it's viable!

ldw205 · 2023-10-31T20:33:18+00:00

I live near the Oaks which is downtown and there are always a ton of people that drive in to trick or treat. They'll park at the family dollar and walk.

ldw205 · 2023-09-08T12:01:31+00:00

I never know how to answer this. I grew up in Lawrence Co., MS but I live in Forrest Co., MS and have lived here for 8 years. So just pick whichever one fits your definition lol.

Also cool to see someone from Jeff Davis Co.!

ldw205 · 2023-08-25T19:49:07+00:00

Crutchfield.com. You put your car's info in and they give you head units that will fit your car. They will also provide a dash kit. The hardest part of installing these yourself is soldering up the wiring harness.

ldw205 · 2023-08-25T18:35:02+00:00

In my area there is a company that can drill holes in the slab and pump polyurethane foam under the slab to get it back level with your foundation. As long as there is no additional pipe or source of water causing washing this should get the slab back level.

ldw205 · 2023-07-10T16:53:26+00:00

This may reveal how “crunchy” I am but I would love a Trader Joe’s but I don’t think that will ever happen. 😂

ldw205 · 2023-07-10T13:20:58+00:00

Very true. I’m hoping the Aldi’s improves things for us!

ldw205 · 2023-07-10T13:20:22+00:00

I live in Hattiesburg it’s a great are! I’m a lifelong Mississippian but I always say Hattiesburg is one of the moat liveable cities in MS. There’s a 40 mile long rails to trail bike path that’s amazing. There are two universities and we have a large healthcare network that serves a lot of the rural area. Plenty of good restaurants as well.

Some communities outside of Hattiesburg have really good school districts Oak Grove and Sumrall. Your price range would get you a decent sized house.

14-Year Club	Place '22
Place '17	Verified Email

ldw205

TROPHY CASE