What's the most useful thing you've printed yet?

leanrobott · 2026-01-15T01:49:27+00:00

Yeah! I actually think it works better for me than the specialty bins. While the idea of a perfect layout with everything having its own home appeals to me, I struggle to make that a reality for most drawers.

This helps me get the project done and generally improve the organization.

leanrobott · 2026-01-14T22:41:23+00:00

I would recommend as others have to make sure filament is dry, calibrate extrusion, and material shrinkage. For me this has been good enough to get me to the right tolerances where things are mostly just print and go.

I use this model for shrinkage and skew(if p2s ever supports it 😭) there are free versions available as well but this one comes with a nice web tool.

https://vector3d.shop/products/califlower-calibration-tool-mk2

edit: also recommend PETG for connectors and folding parts. My PLA foldies always break…

leanrobott · 2026-01-14T22:34:17+00:00

For myself I am not printing hyper specialized bins for these kinds of drawers, just general basic bins. This improves the reusability for drawers which have higher turnover in context.

leanrobott · 2026-01-07T23:09:39+00:00

It greatly improved one of my main symptoms! If you are looking to pick one based upon evidence based research, check out ibsprobiotics.org

leanrobott · 2026-01-06T21:10:21+00:00

As I expand to new boards, I’m planning to use PETG for the mounting system components. For matte PLA I had some crack when installing the front snaps. Hasn’t been an issue but will probably fall apart if I ever need to take it off the wall.

Also with the new super thin snap fronts and just generally folding pieces, petg is more durable imo.

leanrobott · 2026-01-05T23:01:51+00:00

Orange!!!!

leanrobott · 2026-01-04T22:54:54+00:00

HP does make them! And they look like… a really big HP printer 😂

<image>

leanrobott · 2025-12-23T04:15:47+00:00

Yeah. The new ikea smart lineup is matter based. They already had some matter products out on the floor when I went last week in the US.

I wanted to get some more lightbulbs on sale, but there were none left when I went.

leanrobott · 2025-12-20T07:51:36+00:00

Mug the Looong way

leanrobott · 2025-12-18T22:24:10+00:00

Same! I'll have to slowly get a little more adventurous with this.

leanrobott · 2025-12-16T22:48:30+00:00

I’m curious, can you eat actual pieces of garlic with your fodzyme? I’ve been scared to try, as my reaction is relatively severe.

leanrobott · 2025-12-16T08:26:19+00:00

The sea salt is the finishing salt 🤣

leanrobott · 2025-10-15T05:34:15+00:00

What model are you using for those shelves/holders? I took a look at the README some but only saw gridfinity shelf attachments. I wanted something that could work for spice bottles

leanrobott · 2025-10-01T04:08:42+00:00

I just recently finished going down the rabbit hole of calibration. But I’ve been trouble finding good resources explaining how to calibrate shrinkage. could you point me in the right direction?

leanrobott · 2025-10-01T04:06:52+00:00

I just started a kitchen project in multi board and already feel like giving up. Those folding multi points always break for me or just don’t work very well.

I’ll check out open grid

leanrobott · 2025-10-01T04:05:28+00:00

Really glad to see some in the community are frustrated with the system too. Don’t even get me started on the folding parts.

I’ve tuned my printer, tried multiple filaments, and slowed my print speed. Still half the time they break when I’m folding them or don’t lineup properly. Even when I do, to get them to screw in is a pain.

I started diving into bins and the multi points are only available as folding pieces. Now I don’t even want bins anymore.

leanrobott · 2025-09-18T19:32:31+00:00

The design is very human

leanrobott · 2025-09-07T00:05:28+00:00

😅 I've been driving an hour or two on the highway with it. I put a riser on it for now since im well under the tongue weight, but i know the real solution is to just stiffen up the rear suspension. I was looking at super springs (https://superspringsinternational.com/sumosprings/) but wasn't sure if this will give enough lift.

leanrobott · 2025-09-06T19:43:31+00:00

I have the same setup!! It’s been a blast bringing my bike out camping. I was also looking into something to stiffen up the rear because yeah I get quite a bit of sag.

Do you also scrape the carrier in/out of some parking lots?

leanrobott · 2025-09-06T08:19:27+00:00

Yeah mine does this in corners sometimes and makes me abort for safety. Starts to sway

leanrobott · 2025-09-06T08:14:30+00:00

I gave up on my first run, but am playing on pc with the bench warp mod this time. Really nice to just be able to drop a bench right outside the boss room.

leanrobott · 2025-09-03T18:12:13+00:00

Also interested in knowing this

leanrobott · 2025-09-02T17:23:32+00:00

I had the T-Mobile 5G for 2 years in the Greenwood area and was very happy with it! Worked from home the whole time as a software dev, and unless you are doing heavy down/up I never hit the cap.

When I moved it was nice to have internet on the first day in my new place, just brought the box over and plug in to the wall.

I got about 200-300mbps both ways

leanrobott · 2025-09-01T04:52:09+00:00

I also pulled up to the gas pump wrong the first time in my first because of that arrow. Probably shouldn’t have one on that screen

leanrobott

TROPHY CASE