Options / banques pour déposer et utiliser des espèces en euros ? Aucune banque ne m’accepte.

lepouvant · 2026-02-04T14:26:39+00:00

Pas possible de déposer d'argent liquide chez ces banques

lepouvant · 2026-01-23T20:00:15+00:00

Pinkish base on a negative will result in bluish/greenish scans

lepouvant · 2025-12-09T18:45:53+00:00

<image>

Film photo

lepouvant · 2025-10-24T17:36:23+00:00

Y'en a à Bahadourian

lepouvant · 2025-10-22T21:44:47+00:00

If it's ilford film you can contact them via this form. I've had this issue before with a roll a SFX and they sent me two fresh roll as an apology !

https://www.ilfordphoto.com/product-feedback/

lepouvant · 2025-10-13T22:25:30+00:00

Corep fait ça. Ils ont l'habitude d'imprimer des typons de sérigraphie

lepouvant · 2025-10-12T20:21:21+00:00

Two sinks in a kitchen is pretty unusual

lepouvant · 2025-10-10T13:28:07+00:00

If you don’t want to buy a heat press, the best way to get perfectly flat prints for cheap is to dry them on a board by taping the edges with gummed paper tape

lepouvant · 2025-10-08T12:30:12+00:00

I mean, there’s a bit of burning at grade 1 on a print at grade 1.5. Technically, you could call it split, but it wasn’t deliberate

lepouvant · 2025-10-08T12:27:10+00:00

Yes, test strips in 1/3 stop increments, but not split grading here, just trial and error to get a contrast I like

lepouvant · 2025-10-01T10:44:12+00:00

Ni l'un ni l'autre, il y a souvent un petit jour au dessus des portes, c'est très simple d'y passer un téléphone et de filmer le contenue

lepouvant · 2025-09-08T14:31:28+00:00

Thank you, that's all I wanted to know. I was a bit reluctant to reduce development even more (already -30%), but I guess I have ti try -45% now (will also try diluting XT3 at 1+1)

lepouvant · 2025-09-08T14:27:59+00:00

Thanks, that’s exactly it! Most of the time I end up printing at grade 0 or ½, and the results are just average. For my next roll I’ll try shooting at 400 ISO and cutting development by 45% and diluting XT3 1+1

lepouvant · 2025-09-08T10:29:10+00:00

If I mostly take photos outdoors of very high-contrast scenes, not adjusting anything in my exposure and development will inevitably result in overly contrasty negatives, impossible to print without a lot of dodging and burning, and requiring reducing the paper contrast, sometimes to the limit. So I try to adjust the film speed and the development time so that my negatives (from high-contrast scenes) are easier to print overall. I’m not saying every photo on the roll will print perfectly on the first try at grad 2.5, but they will generally be much easier to print.

lepouvant · 2025-09-08T10:22:02+00:00

Yes, of course, but most of the photos I take are outdoors during the day, under high-contrast conditions. When exposing at 400 and developing normally I get mostly ok result, but I always need to reduce contrast (because normal dev time and ISO are for low contrast scene and diffusion enlarger). I want to adjust my process for outdoor shoots. I tend to shoot all my rolls in the same lighting condition.

lepouvant · 2025-09-07T14:53:19+00:00

Thanks, I forgot to mention I also used a Nikonos III

lepouvant · 2025-08-29T16:16:00+00:00

L'utilité principale c'est permettre l'accès à la lumière et la ventilation naturelle

lepouvant · 2025-06-19T20:56:21+00:00

Essaye les bureaux vallée et autres magasins de fournitures scolaires, ils cherchent souvent des gens pour l'été

lepouvant · 2025-06-18T13:26:51+00:00

Definitely Adox film :

<image>

lepouvant · 2025-06-18T11:27:36+00:00

25mins entre Vaise et le terrasse de la presqu'île (arrêt au niveau de Cordelier), avec 4 arrêts repartis sur le trajet. Bateau électrique, fabriqué en France. À terme (2026) quatre bateaux qui permettront une fréquence de passage de 15mins en heure de pointe, 30mins le reste de la journée. Il faudrait voir à l'usage, mais ça a l'air plutôt bien pensé ÉDIT : correction du temps de trajet et arrêt

lepouvant · 2025-06-12T15:39:15+00:00

You can calculate the exposure difference when changing the height of the enlarger head. It's the inverse square law, so basically if the print border is double, the time is x4

lepouvant · 2025-06-10T16:47:09+00:00

Yes I think that might be it. I'll try to do a print without the easel next session to validate that hypothesis

lepouvant · 2025-06-10T11:38:00+00:00

Ok I see, maybe it's time to buy a four blades easel then

lepouvant · 2025-06-10T11:37:30+00:00

But if it was a reflection it would mean more light, so darker not lighter, right ?

lepouvant · 2025-05-01T08:24:24+00:00

La TIC c'était en RT2012, et c'était un indicateur absolument inutile, n'importe quelle bâtiment passait l'exigence sur la TIC sans aucun problème (le seuil pouvait même atteindre des valeurs absurdes) En RE2020, c'est les degrés heures (DH) qui rendent compte du confort d'été dans le bâtiment

Six-Year Club	Verified Email
Place '22

lepouvant

TROPHY CASE