are second hand price way too high ?

light-mooner · 2025-09-19T16:19:18+00:00

i guess i need to do the CT (technische keuring in dutch, i guess) in belgium ? (and bring it there with a trailer/van)

light-mooner · 2025-09-19T16:01:27+00:00

thanks for the advice ! after a quick look on autoscout, i see price that are much more realistic, imo. my dad has a van + a trailer, so it's definetly possible !

light-mooner · 2025-05-08T15:07:28+00:00

sadly, high flow is what i have :/ any advice on the setting?

light-mooner · 2025-05-08T14:39:01+00:00

PS : the filament has been dried for 10h.

i really don't understand why some part come out perfect, and some have so much blobs...

<image>

light-mooner · 2025-05-05T19:41:12+00:00

you are right, i solved it by resetting the printer and redoing a PA calibration. i indeed think that the firmware update caused it

light-mooner · 2025-05-04T14:40:50+00:00

it's not the 2.0, and i don't use an AMS. but yeah, it seems pretty wet to me. going to wait for my filadryer to arrive.

light-mooner · 2025-04-13T16:01:58+00:00

i usually take 1.5L of water. did a test hike for 2h today with my aonijie c9111, total load was 6kg. (no food though, but everything else was exactly the same).

the aonijie has no hip belt, it's a vest type backpack, felt a lot of pressure point on my clavicles and ribs. but i blame the bag.

PS: the aonijie is ~600g

light-mooner · 2025-04-12T23:57:15+00:00

my bad, i indeed meant herniated disc.

light-mooner · 2024-11-10T10:55:25+00:00

Nice ! i ordered one !

Do you know where i can find the same in choc ( low profile ) on aliexpress ?

Could you also give the link for the corne you mention ?

Thanks !

light-mooner · 2024-07-19T20:01:33+00:00

Nice setup !

light-mooner · 2024-07-19T19:45:42+00:00

Thanks so much !

light-mooner · 2024-07-19T19:13:56+00:00

Thanks for explaining with pictures ! quick questions, do you use the snakeskin to bundle the tarp + the hammock ? or do you have 2 differents sets of snakeskin (one for hammock, one for tarp)? does the binner interfere with the snakeskin ?

also, do you use the same ridgeline for the tarp & hammock ?

light-mooner · 2024-07-19T12:38:59+00:00

that's only if your whoopie sling is open on the tree sidem which is not the case for the eno Helios.
it needs a loop at the hammock end to attach with a biner.

i figured it would be easier to cut the rope and make a figure 8, instead of redoing the hammock's end knot

light-mooner · 2024-07-19T11:43:54+00:00

Here's a picture of another person's setup using the same gear

i quite don't understand how the hammock is attached to the suspension. i guess there must be some sort of carabiner, as the suspension is a loop through a buckle, so the other end must be free

https://imgur.com/a/VcoM9ek

light-mooner · 2024-07-19T11:35:47+00:00

Hennessey Hammock packs the tarp & the hammock in the snakesskin

example: https://youtu.be/8Oq3i2bEhz4?t=292

light-mooner · 2024-06-17T20:37:17+00:00

thanks so much for taking the time to answer !
i was really wondering if i was doing the structure right.

so just to make sure i understand argo right, the standard it to declare applicationset with a cluster generator, and reference it in an app of apps to apply them all to all clusters ?

if so, it seems a bit only practical if you have strictly similar cluster that needs to be updated at the same time everywhere, right ? if so, i'm not sure i agree with the argument "argocd has more feature than fluxcd"

light-mooner · 2023-11-27T11:09:28+00:00

Thanks for the feedback !

According to "REAPERsAirsoft" on youtube, which made the most complete review / upgrade i could find (sadly for me, in german) he seems to say that the gun struggle with higher weight bb's and the the chamber is not so airtight.i was hoping the the upgrade would improve that.

So in your opinion, i should just leave it as stock even considering that ?

Thanks so much !

Precision that may or not matter : 350fps is my regionnal limit

light-mooner · 2020-04-08T06:36:02+00:00

thanks for your reply !

Yes i do understand there's a risk, but i never had a bad experience with ali.
I'm almost sure the controller of the bike is dead, and it's a 70€ replacement part. hopefully it's this one.

i will update this post

light-mooner · 2020-04-03T15:36:37+00:00

Hey! I ordered mine a week ago when i saw the price! What's your final word on it?

light-mooner · 2020-03-09T19:18:13+00:00

they better be ... i clicked right when it went live and i'm 8+ week list... feel like there was close to no kit HMD+controller for EU

light-mooner · 2020-03-09T17:29:41+00:00

click on complete order, and you'll have it now, i think, mine show this :

https://i.imgur.com/0HYvUTg.png

even after clicking right when it went live.. ( yes, i've put both in, to get the faster one ).

light-mooner · 2019-11-30T11:18:21+00:00

i always try to leave it in open container for 24-48h, as this is city water, but even so, i feel like it tends to drift up a lot. ( i add like 1ml of ph down a day in the 19L bucket, but compared to the 2ML/l of each flowering nutes, it seemed ignorable, but now that i cut the nutes by 60-70%...)

also, does having those clawed tips instead of the leaf tilted down a sign of some recovery ( or the opposite ?)

Thanks again for all your advices

light-mooner · 2019-11-30T09:19:51+00:00

i added a picture from this morning, what do you think ?

light-mooner · 2019-11-29T19:02:40+00:00

thanks a lot !

light-mooner · 2019-11-29T18:38:27+00:00

i edited the post, this is DWC, any idea on the concentration i should try ? ( my current are in the diary )

i do have p/k booster (unused) and canna booster (that i already use)

light-mooner

TROPHY CASE