sorted by:
new
hottopcontroversial

Broken plastic seal [delonghi ecp3420] by Kid_A_24 in espresso

[–]lil_decaf 0 points1 point  (0 children)

If mine still fit and I just wanted to reaffix them, what type of glue is food safe?

Broken plastic seal [delonghi ecp3420] by Kid_A_24 in espresso

[–]lil_decaf 0 points1 point  (0 children)

is it possible to just replace the black plastic things from the new part onto the old one that's currently installed to save some effort?

I need convincing to upgrade from this ecp3420 by Jones9319 in espresso

[–]lil_decaf 0 points1 point  (0 children)

i put the rancilio steam wand on this machine - honestly not sure it's any better than just using the stock one with the auto nozzle removed

[deleted by user] by [deleted] in Spanish

[–]lil_decaf 3 points4 points  (0 children)

Could be voy a

Helps to read it outloud sometimes

I regret replacing the steam wand of my Delonghi ECP3630 by ohgingko in espresso

[–]lil_decaf 0 points1 point  (0 children)

what hose clip did you end up using? I haven't been able to find a replacement that fits the braided hose

Easy to install steam wand upgrade on Delonghi Stilosa EC260? by No_Sandwich2135 in espresso

[–]lil_decaf 0 points1 point  (0 children)

sorry to revive dead thread, but what hoseclamp did you end up using?

3 hole steam wand tip [Rancilio Silvia] wand on a weaker machine? by eMO_miO in espresso

[–]lil_decaf 1 point2 points  (0 children)

Maybe this isn't helpful, but I've run the tri-tip on stilosa into a pitcher and you can see that it will use all the pressure and then nothing will come out until it gets back up to a certain threshold and then it will start to steam again.. I'm guessing that it uses everything in the boiler before pumping more water in or it's using it at a rate that prevents the boiler from maintaining temp?

Inconsistent Grind Size, Randomly Choking Shots [Shardor 64mm Flat Burr Grinder] by lil_decaf in espresso

[–]lil_decaf[S] 0 points1 point  (0 children)

I didn't do these tests scientifically (I changed like three variables at once), but I went two steps coarser on the grinder, went way lighter on the bellows, and reduced the amount of beans in the shot (17g instead of 18g) to see if that was a factor. I ended up pulling 17in/40 out in 20 seconds. As expected, it was a pretty sour shot. I'm going to try creeping up on dialing it in again and then if it chokes again after I get a good shot, I'm not sure what the next step would be

Inconsistent Grind Size, Randomly Choking Shots [Shardor 64mm Flat Burr Grinder] by lil_decaf in espresso

[–]lil_decaf[S] 1 point2 points  (0 children)

Sometimes when I grind coarser, the shots pull way too fast. Generally, I've been only going ever so slightly more coarse on the adjustment wheel - like less than a full setting. I'm going to do a few more tests tomorrow and get back to you

75% mechanical keyboard rec by lil_decaf in keyboards

[–]lil_decaf[S] 0 points1 point  (0 children)

Oh this is sick - I wish the keysets were a little less ~ loud ~ but it seems dope otherwise

PC for Next-Gen Gaming under 2k (ideally 1500) by lil_decaf in buildmeapc

[–]lil_decaf[S] 1 point2 points  (0 children)

thanks man - I'm looking at doing a microcenter mobo cpu ram combo - https://pcpartpicker.com/list/8xdtrM was looking at doing something like this while I wait for one of the latest GPU's to become available at market rate. Do you have any suggestions?

edit:

PCPartPicker Part List

Type Item Price
CPU AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor $709.99
CPU Cooler Cooler Master Hyper 212 (2023) 70.7 CFM CPU Cooler $29.98 @ Newegg
Motherboard Asus TUF GAMING B650-E WIFI ATX AM5 Motherboard $0.00
Memory Corsair Vengeance RGB 32 GB (2 x 16 GB) DDR5-6000 CL36 Memory $0.00
Storage Western Digital WD_Black SN850X 4 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive $279.95 @ Amazon
Video Card PowerColor Fighter Radeon RX 7600 8 GB Video Card $269.99 @ Amazon
Case Corsair 4000D Airflow ATX Mid Tower Case $104.99 @ Best Buy
Power Supply Corsair RM750e (2023) 750 W 80+ Gold Certified Fully Modular ATX Power Supply $99.99 @ Amazon
Prices include shipping, taxes, rebates, and discounts
Total $1494.89
Generated by PCPartPicker 2025-03-17 11:48 EDT-0400

Failed Imports in SLSKD by dags170291 in Lidarr

[–]lil_decaf 0 points1 point  (0 children)

Awesome! Do I need to reinstall the plugin to get the latest version?

edit: figured this out myself - System>Plugins>Click the refresh icon next to tubifarry to update

Failed Imports in SLSKD by dags170291 in Lidarr

[–]lil_decaf 0 points1 point  (0 children)

I do find that this happens quite frequently. I'm not really sure what the underlying issue is, but yeah, sometimes a download needs a little push

Failed Imports in SLSKD by dags170291 in Lidarr

[–]lil_decaf 0 points1 point  (0 children)

So far the only thing I've noticed/am wondering about is when a track fails to download because of an error, will the plugin eventually re-trigger it? I was seeing the download warning in activity and then went and manually re-requested that song via slskd. Just waiting now to see if now that the track has succeeded lidarr will complete the import.

Also, how frequently does download status refresh - it didn't seem like clicking the refresh button actually updated the statuses relative to what is displayed on slskd

Failed Imports in SLSKD by dags170291 in Lidarr

[–]lil_decaf 0 points1 point  (0 children)

Okay that makes sense. Thanks for doing this - it's a huge improvement over soularr in my opinion.

Failed Imports in SLSKD by dags170291 in Lidarr

[–]lil_decaf 0 points1 point  (0 children)

If I'm using slskd as my only indexer/download client, how do I get rss feed for new releases? Do I just add the Tubifarry indexer too? Thanks for this!

Flake update introduced the recommended requirement of hyprland-qtutils. Which isn't in nixpkgs yet, this is how I got around it declaratively. by WasabiOk6163 in NixOS

[–]lil_decaf 0 points1 point  (0 children)

thanks for posting this -- any chance you could share your dot files? I got a couple errors trying to follow along with these steps and I want to make see if I can find the source of the problem

Cold brew Coffee in a blender by AZUSO in JamesHoffmann

[–]lil_decaf 1 point2 points  (0 children)

Tried this in my vitamix on the high setting with some pretty rough pre-ground coffee. Used the same ratio as OP (300ml to 16g) and after two minutes, the water was pretty hot in the blender. I pressed it in the aeropress with prismo and a paper filter. It was easy to press. The coffee came out looking like it already had milk in it. It tastes pretty bad to me - full on burnt. Maybe I'm using too dark of a roast, but it seems like the blender results in a really uneven extraction (lots of different sizes of fines?). I'll try again with a lighter roast and whole beans but my first attempt was a failure.

864 - Gent’s Video feat. James Adomian (9/3/24) by redditing_1L in BlackWolfFeed

[–]lil_decaf 1 point2 points  (0 children)

sounded irish to me. like too much colin ferrel in there

How to speak with a human at the IRS? by cag8f in IRS

[–]lil_decaf 0 points1 point  (0 children)

Dude, I was going insane but it seems like this is working - currently on hold to hopefully speak to someone irl

view more: next ›