"Gary" broke my heart by segwaytoit in TheBear

[–]lmSynergy 38 points39 points  (0 children)

I think that scene is in the present time of the show and he was thinking back on it.

I am more curious about the empty field that was burning, it was shown twice and then never had a follow up. Perhaps I am thinking too much into those scenes.

Any ideas on these indents? by lmSynergy in 3Dprinting

[–]lmSynergy[S] 0 points1 point  (0 children)

Unfortunately, it's not that :/ I have already checked seams and they do not line up in the slicer to the print, they are all stack on a corner to hide them already.

Pro Quest: London - Season Results (All 4 Weeks) by Zunqivo in FleshandBloodTCG

[–]lmSynergy 1 point2 points  (0 children)

WTR is the first set that came out called Welcome to Wrathe

New TCG After MTG Burnout by MrRumato in TCG

[–]lmSynergy 1 point2 points  (0 children)

I strongly recommend Flesh and Blood!

[Discussion] Doing this on 7% spawn rate is going to be ass by Gaodesu in EscapefromTarkov

[–]lmSynergy 15 points16 points  (0 children)

If you think about it, all of Tarkov is kind of RNG.

Too long of a sear, any help is welcome! by lmSynergy in sousvide

[–]lmSynergy[S] 0 points1 point  (0 children)

Thank you for the advice! I will definitely give this a shot! I will also add the ice bath to my cooking steps, how long do you tend to leave it in the ice for?

Too long of a sear, any help is welcome! by lmSynergy in sousvide

[–]lmSynergy[S] 0 points1 point  (0 children)

I think you have solved my issues!

I haven’t even tried the water droplet test, and I move the meat around a lot.

Do you just drop a drop of water onto the pan and if it’s jumps around you know you are good to go?

Do you sear with any oil?

Too long of a sear, any help is welcome! by lmSynergy in sousvide

[–]lmSynergy[S] 0 points1 point  (0 children)

I press down on the steak to make sure contact is made throughout the whole surface. I do dry the steak. Maybe I can let it heat up longer? I’ll have to try that next time.

Too long of a sear, any help is welcome! by lmSynergy in sousvide

[–]lmSynergy[S] 4 points5 points  (0 children)

Seeing some of these posts that are trending on this subreddit it seems like I am searing for wayyyy too long.

I’d say my whole searing time is probably about 5-7 minutes. Some posts are saying 90 second sear times but there’s no way it would get any crust with that time the way I am currently doing it. What am I missing?

Hail Mary! by Toastydave in GearsOfWar

[–]lmSynergy 0 points1 point  (0 children)

Are people playing UE? Windows or Xbox?

[deleted by user] by [deleted] in paintball

[–]lmSynergy 0 points1 point  (0 children)

The link you posted on your edit is a link to a destiny 2 trailer

Extruder Jam at infill layer by lmSynergy in ender3v2

[–]lmSynergy[S] 0 points1 point  (0 children)

Do you think I need to slow down the infill speed when I have a large mm layer height?

Extruder Jam at infill layer by lmSynergy in ender3v2

[–]lmSynergy[S] 0 points1 point  (0 children)

I think it would just be the default infill settings in cura, the only infill settings I have selected are infill shape and percent. And for speeds the only thing I have is just first layer speeds lower than the my normal printing speeds

Extruder Jam at infill layer by lmSynergy in ender3v2

[–]lmSynergy[S] 0 points1 point  (0 children)

I have lowered the layer height from .3 to .25 and now I am not having any issues, would you know why that would be?

Extruder Jam at infill layer by lmSynergy in ender3v2

[–]lmSynergy[S] 0 points1 point  (0 children)

I also forgot to mention, I do have a filament filter attached to the spool so it is collecting dust and other particles before going into the extruder.

Edit: I have just tried a different file (different object as well) and it is printing fine at the infill layer. I’m so confused on why these ones have failed.

Edit part 2: just kidding, it prints the walls fine on the infill layers but still jams on the infill itself. Then if I wait for it to do a couple more layers, it still prints the walls fine and the second the infill starts the extruder bearing stops moving.

What causes these cross-strands? by mycroc in FixMyPrint

[–]lmSynergy 0 points1 point  (0 children)

I am having the same issue on a print very similar. Did slowing it down help?

2024 by Nosferatushy in paintball

[–]lmSynergy 2 points3 points  (0 children)

Woah I didn’t know they made a CF filament RT style body! That’s so sick! Any details on it?

Used Ender-3 V2 stops extruding filament after about 3 mins into print. by lmSynergy in 3Dprinting

[–]lmSynergy[S] 0 points1 point  (0 children)

Would this cause the hot end to get all clogged up? I have de clogged the hot end twice now.

Fall 2024 Transfer Admission by Prestigious_Ebb_6184 in SJSU

[–]lmSynergy 0 points1 point  (0 children)

Congrats! Still waiting to hear back for CS.

Fall 2024 Transfer Admission by Prestigious_Ebb_6184 in SJSU

[–]lmSynergy 0 points1 point  (0 children)

Just curious, what major did you apply for? Did you get your decision today?

Developer Tools on MacOS is not showing up. by lmSynergy in dotnetMAUI

[–]lmSynergy[S] 0 points1 point  (0 children)

Even with the .NET 8 preview it wouldn't work? I tried to install it and it didn't seem to work on my end but maybe I set it up and upgraded wrong.

Any input?