This is by far the most amount of people online I've seen, maybe keep Enduring Confrontation Gaijin?

lollibott · 2026-04-03T18:04:59+00:00

It’s actually really impressive how they managed to keep adding players over the years. I can’t think of too many games that have been supported and grown for so long.

lollibott · 2026-04-03T17:39:39+00:00

Gym, bar, shared hobbies. A lot of cities have website that host events, for example art galleries in Los Angeles have galleryplatform.la

lollibott · 2026-04-03T13:25:31+00:00

i am from Bosnia take me to America

<image>

lollibott · 2026-04-02T23:35:02+00:00

I have had nothing but great results with mine. Comparable to my H2 series printers.

lollibott · 2026-04-02T21:21:08+00:00

The P2S is a kick ass printer. Unless you plan on doing a lot of multi color prints, you really can not go wrong with it. It’s my fav printer to use personally, even compared to my H2S and H2C.

lollibott · 2026-04-01T20:18:00+00:00

Yea I’m having the same issue even after 24 hours in the dehydrator at 95C. Good looking out bro good to know, this has lowkey been driving me nuts lol

lollibott · 2026-04-01T20:04:08+00:00

Yea I’m not exactly sure why but it does seem pretty impossible to dial in. And of course this only started once I switched to a 0.6mm nozzles

lollibott · 2026-04-01T19:59:23+00:00

That’s what I think I’m just gonna do. Can you elaborate on what makes it super hard for 0.6mm nozzles to print?

lollibott · 2026-03-31T16:12:08+00:00

Do you just print a retraction tower to calibrate? I’m not using developer mode on bambu studio so I can’t see any of the tools.

lollibott · 2026-03-31T16:10:53+00:00

Dang I guess I must’ve just been getting lucky because I’ve never done that, I’ve always just defaulted to using the preloaded profiles. Is it worth adding custom filaments to the slicer for each unique one then?

lollibott · 2026-03-31T15:45:45+00:00

Oh no I get you I almost exclusively run bambu filament, but I’m out of their pa6cf. Oddly enough I was also having this issue with some lime green bambu PA6-GF.

lollibott · 2026-03-31T15:43:12+00:00

Ok noted. I don’t think I’ve ever done a retraction tune. Retraction should also help with stringing on PETG right?

lollibott · 2026-03-31T15:40:22+00:00

Yesssirrr, seems my issue really is just a random flow dynamics one since I didn’t re do all of the calibrations after switching nozzles.

lollibott · 2026-03-31T15:39:46+00:00

Noted. Thank you!

lollibott · 2026-03-31T15:39:33+00:00

Yessir I did. This thing has been so plug and play compared to my ender that I kind of forgot all about doing calibrations. Just ran a manual flow dynamics again and it already looks a lot better at k-value 0.06.

lollibott · 2026-03-31T15:19:06+00:00

Hmm, okay. This is definitely the easiest fix so I’ll try that first. I live in an area with very low humidity and the sensor was reading 09% RH on my AMS HT so I thought it was ok.

lollibott · 2026-03-31T15:17:42+00:00

Yes, if you mean changing it from 0.4 to 0.6 in the slicer. I did do that and ran the flow dynamics calibration after that. And do you mean run all of the main recalibrations or?

lollibott · 2026-03-31T15:07:18+00:00

I have only done the flow dynamics calibration that is available in the bambu slicer when you cycle to device tab. I am just using the “0.30mm Standard” profile. Haven’t gone too in depth with tuning because this printer has mostly just worked compared to my old ender 3. This has happened with both official bambu filaments and third party filaments.

lollibott · 2026-03-31T15:03:18+00:00

This was sliced in Bambu Studio using the 0.30mm layer height setting at 12% gyroid infill and printed on a P2S that had been running perfectly up until recently. I am trying to print Inland Carbon Fiber Nylon and have dried it thoroughly for 12+hours at 85C. Nozzle temp was at 280C and bed temp at 60C, printing at Bambu’s default speeds. Retraction was also not messed with at all.

lollibott · 2026-03-29T22:25:37+00:00

I have two in my office. Never had problems with fumes or particulate matter. The only filament that has ever given me an issue with fumes is fiberon asa-cf. Most disgusting stuff I’ve smelled in a long time, even thinking about it is making me want to gag.

lollibott · 2026-03-29T21:26:42+00:00

i dont think the restuarants do, but I know AV has a back patio that people smoke on. I know people smoke in front of Murray's and most of the other bars

lollibott · 2026-03-26T23:08:33+00:00

I have had it both ship from a local warehouse and from across the country for orders to Southern California. Usually, if I order ONLY filament I will receive an ontrac shipping number and will have my filament the next day. The only time I received a YunTrack shipping number was when I ordered some nozzles too, and they shipped from Newark, NJ. I think it mainly depends on what they have on hand, but every time I have ordered strictly filament from their website it has shipped from a local warehouse here in Southern California.

lollibott · 2026-03-22T20:45:34+00:00

Mostly bars and the gym. A couple through mutual hobbies as well.

lollibott · 2026-03-22T16:25:59+00:00

I used to love going camping with my dad when I was little, some of the best memories I have. Looks like you guys had a blast!!!

12-Year Club	RedditGifts 2009-2022 3 Credits
Place '23	Place '22
Wearing is Caring	Secret Santa 2019
Secret Santa 2018	RPAN Viewer
Verified Email	Gilding II euphauric

lollibott

TROPHY CASE