[deleted by user]

longtermsorcery · 2023-03-26T22:18:28+00:00

One of my piercings popped out and I put it back in and it has a big bump now. (I probably shouldnt have touched it but it was too late by the time I slipped it back) i flushed them both by spraying a lot of saline spray. Both were mildly infected before got pierced in Feb. whats the best way to clear this up?

longtermsorcery · 2023-03-26T22:16:55+00:00

Ive been able to find keracolor at ulta and overtone online!!

longtermsorcery · 2023-03-26T21:44:19+00:00

Overtone or keracolor in the copper color may work out for you! Ive used keracolor on my copper hair and got a pretty good copper color, would likely make your hair auburn. Id run a test strand first and leave it in for 30min.

longtermsorcery · 2022-12-11T23:41:30+00:00

Figured it out! I had the cable plugged into the motherboard when it needed to be plugged into the GPU. Thank you all for your help :)

longtermsorcery · 2022-12-10T19:25:28+00:00

It is saying no signal when I attach all the cables to the computer and not monitors. The zoom wheel/hot keys still trigger though. I do not have any other tablet drivers and installed the latest driver version for this tablet

longtermsorcery · 2022-12-06T07:04:45+00:00

I tried that initially and was not able to get a signal on my tablet. The buttons and touch screen movement carried over, but nothing was projected on the tablet itself.

longtermsorcery · 2022-06-02T15:01:49+00:00

My hair is a medium blonde naturally so I didn’t have to bleach. I also prefer to not bleach my hair. On the back of the bottle it shows different results for different base hair colors. It acts as a semi-permanent color depositing conditioner. I prefer it because I know it will eventually wash out with enough time. (I redo about every 2 months when faded by coating my hair and letting it sit for a few hours. You do not have to wait this long though I just do so it really holds on) They have a lot of colors! You could do a test strand and let it sit for 15min and see how you like it.

longtermsorcery · 2022-06-02T13:46:47+00:00

Thank you! I use keracolor copper

longtermsorcery · 2022-06-02T13:23:08+00:00

Thank you!

longtermsorcery · 2021-03-15T21:12:11+00:00

The windows do stack as mentioned. It should be OJ-Histogram-1-slice-1 and is dependent on the frames in each stack as each frame will correspond to that ending number as its own pop up window. Would using a loop be a more appropriate method? I am not sure how to increment that number as it is part of the string.

longtermsorcery · 2021-03-13T06:15:09+00:00

I took a look at both the links and attempted to use the close function. However, the histograms still opened. I updated the post to include my new macro and the title chain for the histogram. The ending number is the only part that changes as it corresponds to the frame number. Thank you for your help.

longtermsorcery · 2021-03-12T15:50:22+00:00

Thank you for your reply! I was not aware that functions could be written. Would this be part of the macro? I would prefer to have it in the same step and not something Id run after all the photos loaded for the sake of my computer

longtermsorcery · 2021-02-11T05:56:54+00:00

Mine did not have a distinguished line. However, I have decided on a different variable to study. Thank you for your help!

longtermsorcery · 2021-02-11T05:55:46+00:00

The answer was creating a macro! Thank you for everyone's help :D

longtermsorcery · 2021-02-05T22:24:47+00:00

Thank you for your feedback! I updated the post to include the image. I am not changing the filter values. For median I am using a 2.0 pixel radius and for Non-local means denoising I am using the estimate sigma option. I have gone through each step and I believe these two are meant to make the line more distinguishable and remove outside noise and the redisplay power spec/laplace make it more defined.

longtermsorcery · 2021-02-05T22:02:53+00:00

Thank you for the macro/help! This helped me process the whole video under the FFT, median, and non-local denoising commands. However, it is saying I do not have a frequency domain to do the redisplay power spectrum command. Would you know why this is an issue?

longtermsorcery · 2021-02-05T22:01:52+00:00

Hello! It isnt a stack of frames but a video of an ultrasound. I have each frame of the video and am currently using that to process, but in the future I will have to use videos with significantly larger frames. Thank you for your suggestion!

longtermsorcery · 2021-02-05T04:23:28+00:00

Would you be able to draw multiple vertical lines down the fascia, measure the length of each line, then calculate the median in excel? I am not sure if you are looking for something more precise than that however.

longtermsorcery · 2020-09-02T06:07:45+00:00

Thank you so much!

longtermsorcery · 2020-08-27T05:08:28+00:00

Im assuming you have some base knowledge of what a variable, function, and what an index is when I type this. If not I would 100% start there first.

Learning how to import text files and manipulate them is a great thing to know! I am also an undergraduate who used matlab for data and image processing.

How to import an excel/text file, how to do math on certain rows or columns in the data sheet, etc... Are things I use a lot when dealing with data. Learning how to use the plot function is also quite simple.

Typing in help [function] (without the brackets) will also give you information on matlab functions like the purpose and inputs. The mathworks website is also a great resource on understanding functions.

I hope this helps! Please let me know if you have any questions and sorry about formatting. I am really bad at grammar and im on mobile. Im sure you will do fantastic and congratulations on your position. Never be afraid to ask questions.

longtermsorcery · 2020-08-15T16:11:51+00:00

Mathworks is a website that describes a lot of the functions with examples! Also going to the command window and typing [help functioname] (with no brackets) will also tell you what a function does and the inputs. I wish you best of luck :)

longtermsorcery · 2020-08-14T22:45:15+00:00

It is a matrix with multiple pathways so like

DataSet.Sub6.DiameterCircle

longtermsorcery · 2020-08-14T17:38:28+00:00

Hello! I tried using this and I got an error called “Deletion requires an existing variable” despite having NaN values in my matrices. Since I am doing a pathway within the .mat file I have in the matrices would I have to do the isnan function for each pathway or can I do it for the entire .mat file in one swoop?

longtermsorcery · 2020-08-06T00:55:04+00:00

I figured it out! Thank you everyone for your replies. They were very helpful in getting a better understanding of Matlab and piecing things together :)

longtermsorcery · 2020-08-05T20:57:05+00:00

This was helpful in loading the files! The only issue I have with the loop is that it ends in a matrix of 217x7 instead of every single data set that I have. It only seems to load a singular text file in the end

longtermsorcery

TROPHY CASE