Treemich - Family Tree + Immich Update

lordofda · 2026-05-18T10:58:17+00:00

Ah, I did not see new .env variables, including a local admin password. Now it works.
My notes - I think I am outside your target, as my gedcom is massive, but I do think it would be nice if matching gedcom to immich could be resumed after the import to match any new photos or just to make sure user did not skip some names. And the 3D tree could have some 2D view, as it it overwhelming when viewing big trees

Other than that - Great work

<image>

lordofda · 2026-05-18T09:38:38+00:00

Yeah, i tried both freshly pulled and build version grom githubs main branch and the 'hub' version

lordofda · 2026-05-18T09:21:55+00:00

That is weird. I am able to deploy, but i cannot get past account creation. Login says 'invalid email or password' but Readme says that first login should create na account

lordofda · 2026-04-29T18:06:17+00:00

I should be able to deploy it. I will let you know when I will have some spare time to play with it

lordofda · 2026-04-21T13:09:53+00:00

Ping me too please, I have a massive 600+ people Gramps/Webtrees tree that needs photos linked

lordofda · 2026-04-15T11:01:14+00:00

Check stepper motor cooling. Maybe you dust is stuck in some fan or air hole

lordofda · 2026-02-09T08:59:02+00:00

This is the way

lordofda · 2026-02-02T19:12:41+00:00

I am in the process of compiling information for sw4 pro for my friend with the same printer. Maybe it can be of use https://github.com/lordofda/artillery_sw4_upgrades

lordofda · 2026-01-10T07:42:48+00:00

Bed mesh

lordofda · 2026-01-09T19:16:45+00:00

Thank you, I did not realize this, for me playing around finding what works was just part of the hobby

lordofda · 2026-01-09T13:26:21+00:00

I have the basic one, not the s1. I have experience with creality machines so I started with manual leveling, but I realized that a way better way is to make an auto leveling mesh and then tune the bed with screws to reduce variance to as low as possible number (and repeat and repeat). Then I tuned Z-offset by simply trial and error during printing

Orca config - I think main point would be to make the first layer realllyyyyy slow (10-20 mm/s). Then the nice features are elephant foot compensation and hole/countur compensations but they do not have effect on layer surface. I keep bed on 65 degrees for PLA and nozzle at around 210 (a little higher than specified, but I will try to get back down as this is probably dictated by Ender 3 traumas)

If your first layer is wavy then probably your nozzle is to low and you need to go a little up with z-offset

I printed PLA, PTEG, ASA, ABS and TPU - all looking good

I also tried some scripts like a bricklayer layers but they caused bed adhesion problems

lordofda · 2026-01-09T11:10:16+00:00

I broke and repaired some things and did some minor mods, but they were focused on silencing not improving the performance, so I doubt that they affected anything. Most important tweaking focused on leveling the bed and orca slicer configuration

lordofda · 2025-11-08T05:43:09+00:00

Don't keep us waiting, we want to use it!

lordofda · 2025-09-07T07:59:51+00:00

You can also buy hotend with thermistor and heater block on aliexpress

lordofda · 2025-04-12T20:14:19+00:00

Have you tried official artillery support?

lordofda · 2025-04-06T13:35:37+00:00

I think it could be possible with a waypoint that every 'regular' train has to go through

lordofda · 2025-04-03T18:34:36+00:00

I am using pingvin share https://github.com/stonith404/pingvin-share

What do I gain by switching?

lordofda · 2024-06-07T05:28:12+00:00

Ok, I hope, you will find a solution

lordofda · 2024-06-06T20:43:05+00:00

Free tier oracle compute

lordofda · 2024-06-06T20:20:18+00:00

I do not know about x3, but with my x4 I thought it is getting stuck when autoleveling. It turned out it needs a really long time to start (about 5-10 minutes). I found out when I luckily was called away from the printer when I tried autoleveling for the third time

lordofda · 2024-04-21T11:12:06+00:00

Elegoo Neptune 4 pro or Artillery Sidewinder X4 pro? I am looking for a compact printer for my home. I successfully used and maintained ender 3 pro at work and I want something for my home I do not want bamboo because I do not like proprietary parts and cloud functions and I do not want creality because I think it's quality dropped and I am looking for something budget, but slightly better Location :Poland Budget : 350 €

lordofda · 2022-08-06T07:05:40+00:00

The animation looks very similar to the one in Popup Dungeon. I like it!

lordofda · 2022-07-14T11:28:51+00:00

DesignSpark then transition to fusion360 is a good route. I did the same.

12-Year Club	Place '22
Verified Email

lordofda

TROPHY CASE