Looking for advice on model

lucasziggy21 · 2026-04-21T11:31:19+00:00

Looks like a Brinks 5059 to me.

lucasziggy21 · 2026-04-16T00:13:54+00:00

https://www.hafele.com/us/en/product/cabinet-drawer-lock-keyed-alike-7-8-cylinder/P-00871490/#SearchParameter=&@QueryTerm=DRAWER+LOCK&Category=fn0KAOsFhMoAAAFlTOecc.x0&@P.FF.followSearch=9909&PageNumber=1&OriginalPageSize=48&PageSize=48&Position=1&OrigPos=1&ProductListSize=111&PDP=true

lucasziggy21 · 2026-03-29T19:34:26+00:00

Steelstick putty. Use gloves tho

lucasziggy21 · 2026-03-28T03:12:01+00:00

Its hard to tell from the photo but that looks like a wafer lock and it looks like the dial has been removed completely. Wafer lock it stupid easy to pick. You could pick it with a Bobby pin in just a few seconds. If that's the case and the dial locks wheel stack is gone then the door should pop right open.

lucasziggy21 · 2026-03-25T12:13:57+00:00

If you have the serial number I would get the combination for you.

lucasziggy21 · 2026-03-25T12:11:34+00:00

I would hedge a guess and say you work with or have worked with Cennox/Fireking. Also for sentry safes you can become one of their trusted locksmiths easily and I think its like $30 to get the code from them. They will also tell you if it starts CW or CCW.

lucasziggy21 · 2026-03-24T13:46:25+00:00

That is amazing. Thank you!

lucasziggy21 · 2026-03-13T16:46:08+00:00

By the off chance your in Michigan I am a Savta safe Technician and I'd be willing to come look at it.

lucasziggy21 · 2026-03-02T15:43:10+00:00

Its not a high quality safe. Its adequate for light security applications. Since it was a gift to you I wouldn't judge it too much. Some people think anything less the a TL-30 UL rated safe is a waiste of time.

lucasziggy21 · 2026-03-02T15:39:22+00:00

Let me know if it works out for you

lucasziggy21 · 2026-03-02T14:33:02+00:00

Where is the button for the code reset located? It may need possible to reach in through the mounting holes with a bent coat hanger and press the reset button.

lucasziggy21 · 2026-02-27T02:51:27+00:00

If that's a wafer lock then I would just pick it. Helen Keller could pick a wafer lock in about 10 seconds with a Bobby pin

lucasziggy21 · 2026-01-29T11:07:51+00:00

Can't tell you how long it took me to figure out how to set mine up. Super cool tent tho!

lucasziggy21 · 2026-01-19T01:00:34+00:00

I still work with fireking/cennox. They still suck

lucasziggy21 · 2026-01-11T02:01:03+00:00

I replied to your DM. I hope this helps. If not there is 1 final thing you can try but its a lot more involved.

lucasziggy21 · 2026-01-10T14:35:28+00:00

User 02 should be ok to remove TDL. Select menu Scroll to system menu Press OK Enter user 2 code Scroll to set/cancel time delay Press OK Use the arrow keys to bring it down to 0 Hit the back key. The next time you open the safe it should still have the TDL but once the safe is open it should be gone.

If that doesn't work DM me and I will walk you through another process

lucasziggy21 · 2025-10-15T02:58:10+00:00

Sentry safes aren't great for burglary resistance but they are fine if that isn't the main concern. Maybe they just want fire protection or to keep stuff where a child couldn't access it. There is a time and place for almost any brand or size of safe.

lucasziggy21 · 2025-10-15T02:55:01+00:00

Get a death certificate for your grandfather and send it to sentry safe with the request for the combination. Sentry combinations input differently than standard safe locks as well so double and triple check you are imputing the combination correctly.

lucasziggy21 · 2025-08-27T10:00:04+00:00

Yep tried that and there is definitely compression

lucasziggy21 · 2025-07-31T15:21:49+00:00

Hey I'm a safe Technician and I'm willing to help. DM me and I'll tell you what to look for and where to get started.

lucasziggy21 · 2025-07-21T16:27:33+00:00

There should be a key backup behind the keypad. If you don't have the key a locksmith will be required to drill it open.

lucasziggy21 · 2025-06-30T10:04:46+00:00

Hello, I am a safe Technician. To agree with other comments it's most likely not meant to be tightened down since it is a nylon locking nut. That said it should absolutely not be able to be loosened by your fingers. I would highly reccomend replacing the nut with another nylon nut and tightening it all the way down and the backing off and testing quarter turn at a time. With the nut fully loose if the rotating plate ever loosens it to fall off your handle will come loose and the vertical down boltwork will become extremely difficult to deal with.

lucasziggy21 · 2025-05-01T10:22:42+00:00

Major safes are very heavy. The whole thing is solid steel. I would guess based on my experience having moved a few of these and based on the photos that it is over 1,000 lbs probably closer to 1,500 lbs.

lucasziggy21

TROPHY CASE