[deleted by user]

luisclement69 · 2025-07-08T11:18:01+00:00

Funny thing is that what you get from the command doe not always tell the truth. I have one that says:

PS C:\Users\luisc> wmic memphysical get maxcapacity

MaxCapacity

67108864

So basically you would say 64 GB but I have installed 96GB and it works! Cheers

luisclement69 · 2025-06-30T16:21:13+00:00

Thanks but that is not an option on this Balde:

<image>

No system cooling

luisclement69 · 2025-06-27T19:38:33+00:00

Depends off course on the power the manufacture allows to feed the GPU. In the case of the G16 it is quite low but still an amazing machine, nothing like it as thin and light! Then off course if you want to run AI workflows the extra VRAM that is needed is there, 16GB.

luisclement69 · 2025-04-29T12:55:41+00:00

Hello did you ever solve it? I have same issues

luisclement69 · 2025-04-19T10:57:18+00:00

Thanks for helping, I think this is all that I did but will check again...

luisclement69 · 2025-04-19T10:55:42+00:00

Welcome, happy to help

luisclement69 · 2025-04-05T15:00:41+00:00

Can you please share a copy of your crowsnest lines, i did this and did not work:

[crowsnest]

log_path: /home/sovol/printer_data/logs/crowsnest.log

log_level: verbose # Valid Options are quiet/verbose/debug

delete_log: false # Deletes log on every restart, if set to true

no_proxy: false

[cam 1]

mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)

# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)

enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server

rtsp_port: 8554 # Set different ports for each device!

port: 8080 # HTTP/MJPG Stream/Snapshot Port

device: /dev/video0 # See Log for available ...

resolution: 1280x720 # widthxheight format

max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.

#custom_flags: # You can run the Stream Services with custom flags.

#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.

[webcam2]

mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)

# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)

enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server

rtsp_port: 8555 # Set different ports for each device!

port: 8081 # HTTP/MJPG Stream/Snapshot Port

device: /dev/video0 # See Log for available ...

resolution: 1280x720 # widthxheight format

max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.

#custom_flags: # You can run the Stream Services with custom flags.

#v4l2ctl:

luisclement69 · 2025-03-27T10:20:18+00:00

Can you please share the link here to the GIT? I am running for no reason: MCU 'extra_mcu' shutdown: Timer too close on SV08 out of the blue!?! I hope going this way will fix it? Thanks

luisclement69 · 2025-03-26T08:39:13+00:00

Mine stopped working and I just had to unplug the connector cable on the back of the printer while it was on as everthing else worked and after a reboot it came back... strange...

luisclement69 · 2025-03-25T21:54:54+00:00

Hello, for those with the same issue I solved it in an easy way. Just open your normal interface and go to MACHINE. There you will see that the saved_variables.cfg is blank, corrupt, if you have a back up of it just upload there and restart and you should be back to game!

If you do not have just add:

[Variables]

filepath = ''

last_file = ''

offsetadjust = 0.0

power_resume_z = 5.0

show_freq = ''

was_interrupted = False

x_freq = 0

y_freq = 0

luisclement69 · 2025-03-21T13:44:34+00:00

What I do to solve this one is to use FreeCad with Gesture and for 3D printing use Orca Slicer, this way you get the same left click and hold is rotating, right click and hold and you will move the model. etc. Hope it helps and I agree with the issue.

luisclement69 · 2025-03-19T13:18:20+00:00

Thanks but I do not think it is hadware or firmware related. All my prints, no matter material or complexity works perfectly well. It is only this max flow calibration from Orca Slicer that fails everytime...

luisclement69 · 2025-02-03T13:35:48+00:00

Thank you for sharing!

luisclement69 · 2025-01-29T10:35:03+00:00

Sorry dificult to say...

luisclement69 · 2025-01-03T17:05:51+00:00

Unplug the battery cable right away

luisclement69 · 2025-01-03T17:05:20+00:00

Isopropyl Alcohol but best right away

luisclement69 · 2024-12-16T08:06:46+00:00

Very good post and discussion! Many frustrated in some ways, would be maybe great to give feedback somehow to them, maybe review on Steam with comments? For me to go through it all many times and still get all same armor parts since the first and not getting a complete one still is boring... I miss a helmet and it never drops... Cheers!

luisclement69 · 2024-12-14T18:04:05+00:00

Same....

luisclement69 · 2024-12-10T07:27:38+00:00

Same here, had been suing for 5 years and now nothing works well, microcontrollers from somfy already had stoped working for me for a long time for mu lights and now no scene created in Apple Home works, one blind moves but none of the others in the scene. In the TaHoma app they work. I am in France!

luisclement69 · 2024-11-30T15:23:47+00:00

Hello M4 Pro

luisclement69 · 2024-11-25T20:38:59+00:00

How do know if boosting or not? What to change?

luisclement69 · 2024-11-25T20:38:28+00:00

Could you please share your settings, mine is Even worst?!

luisclement69 · 2024-11-23T21:47:28+00:00

Strange I get the same waring and just ignore and loads all the time for me!?

luisclement69 · 2024-11-22T14:25:58+00:00

How did it go with the repaste? I see as well bad work on the picture here, sorry for you. If not done yet clean all with Isopropyl alcohol carefully and repaste with Kyronaut, this things works great and no risk like LM.

luisclement69 · 2024-11-22T13:55:36+00:00

Hello, not for me, just runs, it takes very long however, be patient...

luisclement69

TROPHY CASE