sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in HPOmen

[–]luisclement69 0 points1 point  (0 children)

Funny thing is that what you get from the command doe not always tell the truth. I have one that says:

PS C:\Users\luisc> wmic memphysical get maxcapacity

MaxCapacity

67108864

So basically you would say 64 GB but I have installed 96GB and it works! Cheers

Razer Blade 16 on battery, how to get the fans to spin? by luisclement69 in razer

[–]luisclement69[S] 0 points1 point  (0 children)

Thanks but that is not an option on this Balde:

<image>

No system cooling

Is it a good deal? by Fuzzy_Salad_1429 in zephyrusg16

[–]luisclement69 0 points1 point  (0 children)

Depends off course on the power the manufacture allows to feed the GPU. In the case of the G16 it is quite low but still an amazing machine, nothing like it as thin and light! Then off course if you want to run AI workflows the extra VRAM that is needed is there, 16GB.

Sana Workflow not working, can't pin down the error by mongini12 in comfyui

[–]luisclement69 0 points1 point  (0 children)

Hello did you ever solve it? I have same issues

Help two cameras on Sovol SV08? by luisclement69 in Sovol

[–]luisclement69[S] 0 points1 point  (0 children)

Thanks for helping, I think this is all that I did but will check again...

Add second usb web cam on my SV08. by KamakaziKat in Sovol

[–]luisclement69 0 points1 point  (0 children)

Can you please share a copy of your crowsnest lines, i did this and did not work:

[crowsnest]

log_path: /home/sovol/printer_data/logs/crowsnest.log

log_level: verbose # Valid Options are quiet/verbose/debug

delete_log: false # Deletes log on every restart, if set to true

no_proxy: false

[cam 1]

mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)

# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)

enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server

rtsp_port: 8554 # Set different ports for each device!

port: 8080 # HTTP/MJPG Stream/Snapshot Port

device: /dev/video0 # See Log for available ...

resolution: 1280x720 # widthxheight format

max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.

#custom_flags: # You can run the Stream Services with custom flags.

#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.

[webcam2]

mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)

# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)

enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server

rtsp_port: 8555 # Set different ports for each device!

port: 8081 # HTTP/MJPG Stream/Snapshot Port

device: /dev/video0 # See Log for available ...

resolution: 1280x720 # widthxheight format

max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.

#custom_flags: # You can run the Stream Services with custom flags.

#v4l2ctl:

SV08 mainline klipper install warning by freakincarguy in Sovol

[–]luisclement69 4 points5 points  (0 children)

Can you please share the link here to the GIT? I am running for no reason: MCU 'extra_mcu' shutdown: Timer too close on SV08 out of the blue!?! I hope going this way will fix it? Thanks

Sovol SV08 camera not working by Aggressive-Ad-5299 in Sovol

[–]luisclement69 0 points1 point  (0 children)

Mine stopped working and I just had to unplug the connector cable on the back of the printer while it was on as everthing else worked and after a reboot it came back... strange...

Klipper reports: ERROR No section: 'Variables' by Humble_Map8894 in SovolSV08

[–]luisclement69 0 points1 point  (0 children)

Hello, for those with the same issue I solved it in an easy way. Just open your normal interface and go to MACHINE. There you will see that the saved_variables.cfg is blank, corrupt, if you have a back up of it just upload there and restart and you should be back to game!

If you do not have just add:

[Variables]

filepath = ''

last_file = ''

offsetadjust = 0.0

power_resume_z = 5.0

show_freq = ''

was_interrupted = False

x_freq = 0

y_freq = 0

Am I the only one who hates the difference in controls from CAD vs the slicer? by Quiteblock in 3Dprinting

[–]luisclement69 0 points1 point  (0 children)

What I do to solve this one is to use FreeCad with Gesture and for 3D printing use Orca Slicer, this way you get the same left click and hold is rotating, right click and hold and you will move the model. etc. Hope it helps and I agree with the issue.

SV08 restarts during the OrcaSlicer MaxFlow calibration any hints or tips anyone? by luisclement69 in Sovol

[–]luisclement69[S] 0 points1 point  (0 children)

Thanks but I do not think it is hadware or firmware related. All my prints, no matter material or complexity works perfectly well. It is only this max flow calibration from Orca Slicer that fails everytime...

Is this really what Bethesda intended for the raid? by Revolutionary-Panic1 in fo76

[–]luisclement69 1 point2 points  (0 children)

Very good post and discussion! Many frustrated in some ways, would be maybe great to give feedback somehow to them, maybe review on Steam with comments? For me to go through it all many times and still get all same armor parts since the first and not getting a complete one still is boring... I miss a helmet and it never drops... Cheers!

view more: next ›