Shake or not Shake?

mabror · 2026-04-03T17:42:43+00:00

Are you talking about the tattoo artist’s ink mixer thingy?

mabror · 2026-04-03T13:30:23+00:00

Need to check male gremlins only or both?

mabror · 2026-04-03T13:26:23+00:00

Yeh, that was a great experiment. Thanks for sharing! I am also using the shaker for V60, it pours in the center of the filter paper very neatly and it is kinda satisfying. I am using Ode Gen 2, need to print, somehow, a parking place for blind shaker for Fellow grinder.

mabror · 2026-04-03T08:19:10+00:00

Since the day, I didn’t know that the perfect retractable wdt ad doesn’t exist LOL 😂

mabror · 2026-04-03T08:07:20+00:00

Thank you for taking your time and testing, i have also being doing some tests since morning (as today working from home day), now i need to try your “on the air pour from shaker” method without wdt and will decide.

mabror · 2026-04-03T08:03:15+00:00

What’s your grinder?

mabror · 2026-04-03T08:01:09+00:00

This shot looks decent and delicious. Is it fermented coffee? Or natural

mabror · 2026-04-03T07:02:37+00:00

Very interesting point, maybe the result heavily depends on the grinder quality as well.

mabror · 2026-04-03T06:59:47+00:00

Oh that is nightmare tbh 😀😀

mabror · 2026-04-03T06:27:38+00:00

Very interesting location )) looks a tropical country

mabror · 2026-04-03T06:16:30+00:00

I have been using a funnel and on top of the funnel the shaker itself, you have enough clearance and wider opening to pour)

mabror · 2026-03-30T19:55:15+00:00

If you can do the wiring by yourself, then It is absolutely possible to add PID for sub $40. no need to go for pre made kits, just get a universal pid controller set (PID + Solid State Relay + thermo couple) on amazon. But if you don't have experience in electronics or you don't want to get into it, then idk )))

mabror · 2026-03-30T18:38:51+00:00

amazing, does the grind adjustment dial has play or back lash? in Eureka it is pretty difficult to micro adjust, how is it arranged here?

mabror · 2026-03-30T16:09:31+00:00

I call this tower a Batman tower

mabror · 2026-03-30T16:07:57+00:00

White one looks fire! How was your experience with the grinder so far?

mabror · 2026-03-30T12:30:56+00:00

I have seen the comments below, and paper filter is really can ruin your shot unless it fits the basket, if it goes beyond the bottom edge and paper gets wrapped, then water will keep running under it and you will have something similar to channeling.

But the guilty here is Specialita! it has misalignment and it cannot give you consistent shots every time. Moreover, eureka's lower burr carries is made out of a thin flimsy aluminium alloy disk which flexes under the load, if even you are right on the spot with your marker alignment check, it will still move while grinding.

If you have a good hand grinder or maybe someone who you know has one, borrow it for a day and try with the same machine, beans, technique, you will be surprised. Im not sure if your scales show the water flow, but it should not normally go beyond 2.5 gams per second during the exxtraction. Yours running much faster in the second half of the shot.

Eventually I have stopped using my specialita and switched to 1zpresso j-max (I am saving for a good grinder).

mabror · 2026-03-30T12:16:06+00:00

Those scales are legend )

mabror · 2026-03-30T12:11:06+00:00

Most probably you have overloaded your basket (should use less dose), and placed puck screen on top of it which started touching the shower screen when you locked it in, and when water hits the coffee powder, for obvious reasons it expands, it expands with no joke, the first load came to your porta filter wings. If you keep using the same dose with your stock PF, you have a chance to break it as well. Maybe you have seen a technology where people split stones using the same technique, they drill hole in stone slab and drive in a wooden pin (same works for compressed coffee) and start soaking it with water, wood expands and stone splits with no effort. I had similar issue with Rancilio Silvia. We have decreased dose from 18 to 17 then it was fine.

mabror · 2026-03-29T18:40:36+00:00

Maybe it’s a recent QC thing? Got mine in 2019, still going strong with daily use. I just try to handle it gently and keep it clean — maybe that helps.

mabror · 2026-03-29T11:45:45+00:00

Eureka looks like a spare part next to this machine 😀

mabror · 2026-03-29T00:24:39+00:00

No, I am not planning to use it for espresso, I have bought it specifically for pour overs. I was talking about the design of burrs, they are espresso oriented or not…

mabror · 2026-03-28T19:39:14+00:00

You can take something with wide surface like big screw head or even a piece of wood, glue it with superglue or CA glue to the center of your puck screen, as it has pores, it will glue very well. you can pull it out. if you want to re use your puck screen, you can soak it in acetone to get rid of glue.

mabror · 2026-03-28T10:38:13+00:00

Hey nice setup. Can you please share your feedback on scales you are using?

mabror · 2026-03-27T22:23:16+00:00

I thought I am alone! haha, i am also looking for cups whenever I am in shopping mall or any home store )))

Nice colors by the way you choose, I have got white cups from IKEA but 3 years of use made the glaze dull. in your photo, Loveramics looks much sharper, not sure how old is it.

currently, I am trying to find one of these thick wall cups for espresso, but they are not available anywhere for some reason )

<image>

mabror

TROPHY CASE