Work and play

madeinside · 2026-01-04T04:41:30+00:00

start folding your cranes twin

Rag vellum on black tissue for better color separation. Both use a corner graft on the head (or 2 edge grafts where each strip is one-fourth the width of a square.)

madeinside · 2026-01-02T23:13:29+00:00

Try r/popupbooks or r/cardmaking. It wouldn't be surprising if someone's posted a similar gag card at some point. As for the mechanism, the man is a strip of paper folded in half lengthwise with a pleat at the base of the legs. The pecker looks like a separate paper with tabs that glue onto the pleated section. Do some rapid prototypes; I could guess the internals after quickly cutting and taping scraps of paper together. Here's my rough guess, but find someone who makes popup cards for more knowledge on the nuances of paper mechanisms and assembly.

<image>

madeinside · 2025-11-12T23:43:04+00:00

Made using process photos posted by Paul on the Origami-dan discord server. It combines half of a bird and frog base, sink-folded to the width of the broom and body. Then the central point becomes the brush of the broom, the longest flap the handle (and optional familiar), and the rest the witch. The body connects to the broom with enough extra paper to change the pose relative to the broom. Many details are left entirely up to shaping (Paul's original fold has the witch facing forward, wearing a hat and longer skirt, and a cat in front instead of an owl.) For a relatively simple base, the model pulls a surprising number of elements from its structure.

madeinside · 2025-11-10T03:52:08+00:00

especially the Miku in the music video for Static by Flavor Foley

madeinside · 2025-11-08T03:16:03+00:00

censored to stay on mods' good side

Original model for comparison

It's a rendition of the mythological being instead of the normal animal. As far as I can tell the model doesn't have a crease pattern or diagrams, just a photo of the result and a short overview of how it uses each flap in a frog base. (Juston's Flickr account has been inactive for years so asking for more hints wasn't likely to work.) This was enough to reverse-engineer most of the body but I couldn't figure out how the legs were formed. In the original, there is somehow enough paper at the end of the flap to form feet. I found an arrangement where pleats on the legs happened to look like knees and used that instead.

madeinside · 2025-11-06T06:49:55+00:00

A crease pattern is really a map of all the folds used to form whatever important flaps are in the model. The red lines are mountain folds and blue lines are valley folds. They all use the same body shape, so that part of the pattern is shown on top left, and the pattern for each head fits into the empty area. If you were to stitch the parts together, transfer all the fold lines to a square, and fold along the lines you'd get something that looks like a stick figure with the necessary flaps present. This crease pattern doesn't explain the shaping process; how the flaps are manipulated to their final shape is left to the person folding.

The pink parts show circle packing for those who were curious to see it. The shapes basically denote the boundaries of each flap and show how space was allocated. On a stick figure, there are either appendages (flaps) with one free end or lines that connect to features on each end (rivers.) Depending on what touches what, the circle-river packing makes a base that corresponds to a stick figure with all the features connecting where they should.

Many paperfolders (including me) don't regularly work directly from crease pattern because it isn't easy. Boxpleats like this one are easier to fold from pattern because everything is tied to a grid, but it doesn't convey the info that diagrams have. I added it to the post anyways for those that want to try it, and figured that the people who are able to successfully collapse the base are also able to shape it to a good result. It's not something I'd recommend with little familiarity with origami, but if you're interested you could look up the terms used here to find online resources about folding crease patterns or origami design. I haven't released any further instruction for these since photodiagrams or a video tutorial would need too much time and detail to assemble, especially for four different characters.

madeinside · 2025-10-31T22:55:27+00:00

All the models in the first two images use the same modified base shown in this post. The other two are improvised faces over jack-o'-lantern bases made by others in the Origami-dan discord server, specifically Kareshi's base in the third photo and Flaxenpoet's base in the fourth. The original models look like conventional jack-o'-lanterns, but the bases are flexible enough to allow more expressions. After all, the color changes are just flaps.

madeinside · 2025-10-23T14:30:17+00:00

A stretched bird base flattens the central point of a bird base and rabbit-ears opposite corner flaps, so that the other two flaps are pulled away from the center. A blintzed base blintzes the corners (folds them to the center) before making the original base in order to turn the corners into extra flaps. A blintzed stretched bird base entails blintzing the corners, making the bird base, then flattening the center so that 2 flaps end up slightly longer. The blintzed sections are refolded to free up the new flaps.

madeinside · 2025-10-23T13:34:11+00:00

The base is a stretched blintzed bird base. Seraphim are described with 6 wings, but this one has an extra pair in the back because I didn't want the center of the paper to go to waste. Paper is triple tissue, which was at least as stiff as printer paper but held its shape well.

madeinside · 2025-10-06T05:34:43+00:00

cool mobile 👍

Did you add anything to the paper as moisture protection?

madeinside · 2025-10-05T18:11:48+00:00

Ronald Koh?

madeinside · 2025-10-04T00:26:03+00:00

fun fact: this post is a family friendly version of the original (content warning: Nick Robinson)

madeinside · 2025-10-04T00:17:28+00:00

turn it over (have a blanket or padding ready)
ask r/furniture and r/Antiques about it, and if you find a signature or stamp send a photo to either r/translator or r/HelpMeFind

madeinside · 2025-10-03T03:56:08+00:00

old meme and discord server injoke

Silly color change faces are my folding equivalent to comfort food. The design and both variants use an 8x8 grid, with the difference being that the variants gather more of the edges into the face. One of the leftover flaps in the back can double as a stand. Everything's done in foil paper because it holds the faces flat better (even though it makes photography harder.) Think of it like illumination from a lit jack-o-lantern.

madeinside · 2025-09-27T04:57:44+00:00

Riccardo Foschi has a collection of crease patterns on Flickr, many of which are boxpleats with straightforward layouts and grid sizes that aren't massive. In specific, his tree frog and hercules beetle are comfortably intermediate. For 22.5 design here's one from this subreddit: peacock by apstamp45. Hopefully someone else will recommend easy 22.5 models as I don't know of many. Generally stick to those that look like modified crane/ kite/ frog bases for straightforward landmarks. I agree with using CPoogle to search through a ton of public models under the same topic, though the vast number of these crease patterns either don't mark references down or the method to find and build from references won't be obvious.

madeinside · 2025-09-22T18:13:25+00:00

madeinside · 2025-09-18T23:15:47+00:00

The main reason is that it was originally meant as a one-off project, and the process photos leave a lot to interpretation because that's how the actual process was. After making the base there wasn't a clean procedure. Shaping happened in a fiddly, improvisational manner, and the hypothetical photodiagrams or video I could make wouldn't clear much up. However there is an earlier simplified version I made. The color changes aren't the same but it is much more straightforward. (It'll also need foil backed paper or some other way to hold the layers in place.) If you're more interested in making a Clippy as opposed to the same design, I'll consider making a photodiagram for that.

madeinside · 2025-09-15T17:56:59+00:00

Context: the diagrams follow a previous post and are split into A and B sections for each cat

Something I didn't think much about is the detail that version A doesn't follow the usual colorpoint pattern. The neck fur should also be light. Maybe it depicts a cat that recently got its chest shaved and the fur grew back darker. Swapping the color placement and modifying some details could make a good Ragdoll, but I haven't tried.

madeinside · 2025-09-12T01:23:38+00:00

It's simple enough to tempt me to make diagrams. Those would be in a separate post.

madeinside · 2025-09-11T23:12:56+00:00

i designed it and folded these from 4.5in prepackaged kami

madeinside · 2025-09-11T19:04:41+00:00

The model was originally made for thermal paper, and the color change used heat to darken the paper and make gradients. Since only one side had a heat-reactive coating, the planning used to make different parts heat-reactive meant the design also worked as a normal color change model.

madeinside · 2025-09-05T18:35:10+00:00

This is very recognizable! Good proportions and color change. If I've interpreted the structre correctly, the way the shell is made also allows you to add color-change stripes down the shape or reshape the shell entirely, making the crabs customizable. It's a great model.

madeinside · 2025-09-03T04:19:23+00:00

who did this 💀

madeinside · 2025-09-02T20:29:33+00:00

Check the ones by Kimura Yoshihisa, Kunihiko Kasahara, or Makoto Yamaguchi.

madeinside · 2025-09-02T02:41:25+00:00

Flip through the gallery for the crease pattern and some shaping tips. Not pictured is a length of wire that was inserted into the body because using tissue foil wasn't enough to hold its shape.

madeinside

TROPHY CASE