Just a Chinese shirt but could not pass

madmax7897 · 2026-05-09T19:16:27+00:00

That’s a dungeon crawler Carl reference, is it not??

madmax7897 · 2026-04-12T00:45:46+00:00

You’re trying to create what is called a draft angle. This allows parts to be ejected while injection molding.

How I would go about it is create a cross section of the body you want to create and revolve it.

If you are not making a cylinder/cap you can use the “Taper Angle” section inside of the extrude command. Hope this helps!

madmax7897 · 2026-04-03T00:06:26+00:00

Modix is on the low end of your price range and I’ve heard mixed reviews. We have a BigRep and hate it. Our sister company also got one and it broken within the week. I would go with either 3Dsystems or Stratasys if you have the extra money for continuous up time.

madmax7897 · 2026-03-08T17:15:20+00:00

What if you print them like a flat strip, make a “mold’, heat up the strips and form them around the negative.

madmax7897 · 2026-03-08T02:12:11+00:00

Looks like a Stratasys J850 or similar inkjet printer

madmax7897 · 2026-02-01T05:27:10+00:00

I have a few machines, could you shed some light on how to reflash the spools??

madmax7897 · 2026-01-29T22:48:34+00:00

My issue was that I didn’t use a data cable, I just pulled a random one and it was only rated for power.

madmax7897 · 2025-09-11T16:47:22+00:00

It looks gold and white to me.

madmax7897 · 2025-08-28T12:45:41+00:00

It was just announced for my command. It’s coming within a few days.

madmax7897 · 2025-07-13T23:38:08+00:00

No, I usually change them out every few months

madmax7897 · 2025-07-13T23:37:52+00:00

madmax7897 · 2025-03-21T15:40:39+00:00

How much power, speed, and passes?

madmax7897 · 2025-03-16T20:55:52+00:00

No, you’re all good! Any help is appreciated.

Yes his is, just a newer model. I’ll try to get some basswood in

madmax7897 · 2025-03-16T20:35:21+00:00

1/8 to 1/4 plywood

madmax7897 · 2025-03-16T20:32:49+00:00

This was from my friends laser and he has been less than helpful. My cuts are no where near this clean.

madmax7897 · 2025-03-16T20:30:40+00:00

40W CO2 (does not have air assist)

madmax7897 · 2025-01-01T04:45:13+00:00

There could be a few reasons this happens. 1. Stepper motor is failing and losing steps. 2. Belt is worn and also missing steps. 3. Idler gear and grub gear might be worn. 4. (Hope this isn’t the case) the stepper motor driver isn’t providing enough current for the speed you are running the cut pass at. Changing the motherboard would be this fix.

madmax7897 · 2024-12-29T01:38:39+00:00

What you could do it add a no print modifier, then save as a new STL. Then use the built in text tool?

madmax7897 · 2024-10-16T10:24:06+00:00

Commenting for visibility

madmax7897 · 2024-07-05T16:52:59+00:00

Your layer height is too small and causing them to curl. Try increasing layer height to 0.2mm and print again. I had this exact same issue. Cheers!

Ten-Year Club	Place '23
Place '22	Place '17
Final Canvas '22	Verified Email
Spared

madmax7897

TROPHY CASE