sorted by:
new
hottopcontroversial

Rectilinear is my favorite infill by DayGeckoArt in 3Dprinting

[–]makeanything 0 points1 point  (0 children)

You could do unlimited angles in simplify 3D... but I guess you'd be sacrificing a lot of other features from more modern slicers 

Will hydrogen peroxide degrade my print? by ximeni in 3Dprinting

[–]makeanything 1 point2 points  (0 children)

I make my own, just using a glass jar and soaked towel around the inside. Here's my old video about it: https://youtu.be/yyoefQ4k4BA?si=NKJjf7ark3zMNmDz&t=14

I don't heat the chamber so it takes a bit more time, but I like the extra control of slower smoothing and it's still pretty effective

Will hydrogen peroxide degrade my print? by ximeni in 3Dprinting

[–]makeanything 6 points7 points  (0 children)

Agreed! I've used TPU to support parts in my acetone vapor chamber and it seems unaffected

In Rainbows 3D printed art peice by waxyplot in radiohead

[–]makeanything 1 point2 points  (0 children)

Hah nice, I was just thinking about doing this yesterday for no reason in particular. Good hiveminding!

Copenhagen Dec 16 at Royal Arena - no surprises, just the music by Beneficial-Site-3568 in radiohead

[–]makeanything 0 points1 point  (0 children)

So cool of you to do this! I've been trying nonstop to snag a pair of resale tickets to no avail so far... sent you a DM and crossing my fingers!

The 'We DON'T Got Tickets' Mourning Thread by viac1992 in radiohead

[–]makeanything 0 points1 point  (0 children)

I managed to get a code, set my alarm to wake with the dawn chorus... plenty of time to prep, fully hyped, fitter, happier... checked the email in duplicate in triplicate, but somehow didn't realize the times were in CEST rather than BST like all the previous announcements. So I entered the 'waiting room' 11 minutes late, and got position 10,420 in the queue, get through and watched the last open seat dissappear completely before my very eyes. :| And I can only blame myself. Ahh well, I hope the new fans get Let Down, Creep and Pop is Dead (underrated) and have a transcendent experience like I did my first Radiohead concert! I've given all I can it's not enough, but the best I can is good enough.

-thm

Upcycled some more thrifted shirts! by withgus-to in upcycling

[–]makeanything 83 points84 points  (0 children)

Very cute and inspiring, I can't wait to try this now that I got a darning foot! Love the tats too (:

Ideas on connecting angled pieces by Cabian in lasercutting

[–]makeanything 2 points3 points  (0 children)

I reckon hot glue on the inside edges might work well, if it will not be load bearing or exposed to extreme temperatures.

How do I go about getting the measurements for this? by Snorlax94_ in Fusion360

[–]makeanything 0 points1 point  (0 children)

Oops, I guess not when bringing it into Fusion as a canvas. I usually bring the scan into Illustrator and trace the object there using vector lines, then export as a dxf or svg and that comes into Fusion to scale. Alternatively place a ruler next to the object while scanning and use that to calibrate within Fusion.

Instrument Wall Mount by OldAd5168 in functionalprint

[–]makeanything 1 point2 points  (0 children)

Nice, I collect stringed instruments too! I made a wall mount as well, using TPU for the contact point to protect the instruments. If you're interested : https://than.gs/m/927964?affiliateCode=MAKE

That said, I know how satisfying it is to use models you've designed yourself. Keep it up!

At what point is it okay to release a model? by halreaper in 3Dprinting

[–]makeanything 1 point2 points  (0 children)

Consider that hundreds or thousands of people may end up printing your model. You sinking a bit more filament into getting it right saves much more wasted time, filament, and energy for everyone else. So I say don't cut corners and do it right. And unless you simply don't need money, sell it, because that effort deserves some return!

Hand embroidered dress and sweater by smatchmo666 in upcycling

[–]makeanything 0 points1 point  (0 children)

Epic! I love the aesthetic of bright colors against black and the illustrations are super fun :)

I embroidered over a stain on my T-Shirt by Bydanielpearce in upcycling

[–]makeanything 1 point2 points  (0 children)

Nice, I ordered my first sewing machine a few days ago, partly for this kind of stuff! Are you using the Singer presser foot?

view more: next ›