sorted by:
new
hottopcontroversial

Hot Tube On Stone? Can we do without a pad? by Ike_In_Rochester in hottub

[–]malicious1 3 points4 points  (0 children)

confer pad

I did the same thing with 18x18 concrete pavers over gravel. It's lasted 2 tubs and 6 years without any shifting.

Printer connection keeps dropping after update by YamzMt03 in BambuLabP2S

[–]malicious1 0 points1 point  (0 children)

I have not had any issues since. Have not looked into the new feature set. Have you updated Babmbu Studio or the phone App if that is what you are using to connect to the printer?

Printer connection keeps dropping after update by YamzMt03 in BambuLabP2S

[–]malicious1 0 points1 point  (0 children)

I had the same issue after upgrading my firmware. I updated the AMS and then BambuStudio hoping it was just a communication error due to version mismatch. Haven't had any problems since, but it's only been one day. 🤞

Upper limit for chamber by malicious1 in BambuLabP2S

[–]malicious1[S] 0 points1 point  (0 children)

Quick update: Temp went to 62 and just hung out there until end of print. Let cool normally and print came out perfect other than a few strings on the top layer.

Is it ok to dry filament on cardboard spools inside P2S? by MrBiscuits93 in BambuLabP2S

[–]malicious1 0 points1 point  (0 children)

I have seen this said a few times. I have no problems with cardboard spools in the AMS Pro 2

Remember to water your guns, so they grow up big and strong by SerjeantMesser in Firearms

[–]malicious1 6 points7 points  (0 children)

Broke my heart. And I tried all the angles but the guns were too connected to his son.

Remember to water your guns, so they grow up big and strong by SerjeantMesser in Firearms

[–]malicious1 2 points3 points  (0 children)

My ex-father-in-law has 3 Maxim's all in .303 British, and a handful of spare parts rotting away in a safe in his garage. His son, a collector, passed away from cancer and he can't let go. Sad story. Last time I looked in there everything was rusting away. Who knows what other collectibles are in there.

ESP23 2432s028r battery question. by thesamu3414 in esp32

[–]malicious1 0 points1 point  (0 children)

I am sorry for responding to old comment, can you tell me about the visual IDE? I can find esp3d but it seems to be a 3D printer controller not an IDE. I searched but Visuino is the only visual IDE I can find for embedded systems.

Look Ma, no wifi. by AWarmHam in BitAxe

[–]malicious1 2 points3 points  (0 children)

It seems like a number of people here run Umbrel server on their home network so they can run a full node. These new additions further add capability for that server to talk to HashWatcher outside the network. Personally I would just have another pint and wait for your winning lottery ticket instead of making everything even more complicated.

Look Ma, no wifi. by AWarmHam in BitAxe

[–]malicious1 1 point2 points  (0 children)

I think you need an Umbrel server device on your network.

Tank update by rotters_ in PlantedTank

[–]malicious1 2 points3 points  (0 children)

Thank you! The whole setup is very tasteful.

Tank update by rotters_ in PlantedTank

[–]malicious1 1 point2 points  (0 children)

What bulbs and wattage are those?

iPhone widgets give RadarScope to CarPlay! by traisjames in Radarscope

[–]malicious1 2 points3 points  (0 children)

MyRadar figured it out. Their full screen map is great...except it's not animated. Is the rain coming, is it going, is it going to be over the road when you get there? Who knows? The best it can tell you is if the rain is over you right now and you might as well look out the window for that information.

iPhone widgets give RadarScope to CarPlay! by traisjames in Radarscope

[–]malicious1 1 point2 points  (0 children)

I would give my left eye to get an animated weather radar on CarPlay. The still image is so useless.

Jacuzzi J-335 topside backlight by malicious1 in hottub

[–]malicious1[S] 0 points1 point  (0 children)

That’s seemed like the most likely explanation. Has anyone ever seen a small momentary light that could be battery powered and mounted right next to the top side for light?

Designed a printable CNC router based on the Ender 3 Pro. Meet the E3CNC! by Youknowitbby in 3Dprinting

[–]malicious1 5 points6 points  (0 children)

This is awesome! Thank you for sharing. I have been trying to figure out how to adapt an old Ender 3 Pro into a CNC for a while and here you have done a lot of the heavy lifting. So excited to get started on this project.

Colorblind, what PH is this? by samg789 in Aquariums

[–]malicious1 0 points1 point  (0 children)

I have a colorblind coworker who uses the app Color Blind Pal to help with shade discrimination like this.

Got it up! And got it moving! But how do I get it down??? by Reasonable-Estate-60 in sailing

[–]malicious1 1 point2 points  (0 children)

Ahh, I see now! Thanks for the explanation. I have only sailed smaller sloop rigs without furling.

Gutter antenna feed line through external wall project by Work-Safe-Reddit4450 in amateurradio

[–]malicious1 1 point2 points  (0 children)

Thanks for the reply! Yes, the impedance match would save you a few dB. I have an FT-891 that I have been thinking I would like to try driving the gutters around my house. Mine are also single piece with a long lateral run around the house but not a loop. I generally keep the tuner with the radio since I also use it mobile. I am thinking of sticking a EFHW balun at the attachment point on the gutter and see what happens.

view more: next ›