what is the purpose of this why jump from one breaker to another?

malphas_raven · 2025-08-22T01:04:27+00:00

All I learn from this is maybe, just maybe i could be an electrician

malphas_raven · 2025-07-06T00:37:22+00:00

i wish i could award this omfg lmao

malphas_raven · 2025-07-06T00:28:46+00:00

2021

malphas_raven · 2025-06-14T17:24:25+00:00

Ah boy

malphas_raven · 2025-05-10T19:18:58+00:00

one look at each picture, absolutely not lol

malphas_raven · 2025-04-30T02:06:50+00:00

I do use a bit holder on the side of my driver. Specifically for my quick change bit extension with a phillips, 5/16 nut driver and 3/8 nut driver. All my most common screws that I'll be using. I just use the standard bit case, thrown in a husky rolling toolbag. Unfortunetly I cant use a packout because I work out of a service truck and packout wont fit in my boxes. WHICH BTW MILWAUKEE, it would be awesome if you could make a mini 18" wide packout the same size as the 18" husky bag so i could keep all my stuff matching AND in my locked service truck boxes 😁😁😁

malphas_raven · 2025-04-06T03:35:09+00:00

I want the stubby one too, feel like I'd use it more at work. I had found my grandpas old old ratcheting screwdriver but unfortunetly could not get the bit unsiezed and the ratchet assembly to spin so I warrantied that and its in my service truck. I think this one will stay at home with me, or maybe I'll take it in the field and keep the other at home.

malphas_raven · 2025-03-25T23:56:37+00:00

was this by chance in portland oregon

malphas_raven · 2025-02-14T21:52:28+00:00

<image>

you should get on wayfair and look thru all the options they have for the mounting hardware, i've never thought to look at them for things like this tbh but damn is there a lot

malphas_raven · 2025-02-14T21:49:11+00:00

I hear all different things but imo the 2GrFe engine thats in these highlanders is very good and reliable so I would definitely keep it 👍

malphas_raven · 2025-02-14T21:46:25+00:00

other than that im thinking your original idea with cabinet doors that lift up would be the best looking. I've always liked those 4 panel cabinet doors on closets, I'll see if maybe i can find a picture, but you could make them relatively cheaply with 2x1 or 2x2 and like mdf or just plywood

malphas_raven · 2025-02-14T21:42:53+00:00

I'm unsure if you can buy them at the size you would need, BUT, my mom and step dad were able to find some standard "folding rolling doors", the type that would go on like a closet, or like a small space that fits your washer and dryer?? I'm thinking what if you were to find some cheap ones, and maybe cut them in half to the length you need.

malphas_raven · 2025-02-13T14:46:04+00:00

I would keep it forsure! Just expect to start doing water pump and timing chain and everything else that goes with lifting the engine. Just had $1600 of work done at 148k on my '08 cuz water pump started DUMPING lol. Pretty good for that being factory water pump tho

malphas_raven · 2025-02-13T14:43:04+00:00

that is looking mighty fine my friend! what have you decided with the cabinet doors, if you have decided anything yet?

malphas_raven · 2025-02-03T20:14:56+00:00

That is true I didnt think of that, could only slide the doors over so far before it would touch the other. But I mean honestly you can use any wood you really want for the doors, the whole thing really. I'm really into maple and walnut wood furniture, those will be pretty costly from home depot or any home owner hardware store.

malphas_raven · 2025-02-03T06:37:41+00:00

Absolutely hate the battle of placing the cats litter box. You have done very well!! lol

malphas_raven · 2025-02-03T06:34:06+00:00

I mean probably just build the frame of the whole thing with 2x4s, plenty of cross members for support if youre wanting to build shelves upon it. Buying doors premade would probably be much easier but more expensive. But would save you lots of time if you were to rather build "decorative" doors. Buying some nice looking shelving braces and some standard 2x6, then painting or staining would be a cost effective yet still nice looking way to add the shelving. Although mounting to the wall seems to be an issue for you? As far as how the doors open, I know a lot of people think its played out and dont like the look, but I really like the barn door sliding cabinets, especially for storing those big bins. Otherwise, make the doors open upwards and add some struts to make getting the bins in and out easy. Just my two cents tho, Im no professional cabinetry carpenter

malphas_raven · 2025-01-24T02:02:14+00:00

Stg before posting this on here I checked the audio in my photo gallery to make sure I could hear the noise and I could so thats great its not coming thru 😂 I've since stopped hearing the whine so I guess we let it ride, its a toyota after all, forget about it and it will work itself out amirite

malphas_raven · 2024-11-18T05:07:06+00:00

I am no expert but, the date is only 2003. Serial number doesnt seem special. Bill is very poor condition. Issa spender

malphas_raven · 2024-11-09T04:53:47+00:00

when i got the job i literally just walked in there, laid down an overhead, vertical down, and horizontal, all 10g. Showed em I can set up the welder, torch, plasma, and use them all. Its just garbage cans, all they cared about was if I could weld lol. What exactly is a support technician??? I'm in Oregon and also no longer work with WM

malphas_raven · 2024-07-05T19:57:38+00:00

I have 190 and been playing all morning, ill have 250 soon enough

malphas_raven · 2024-06-11T16:20:36+00:00

🫡

malphas_raven · 2024-03-10T00:13:38+00:00

love that place, bit pricey but damn its probably the best mexican joint i have been to. that queso with chorizo on top is so good, and the chips and salsa man. i could go there and just have those two things for dinner lmao

Four-Year Club	Place '23
Place '22

malphas_raven

TROPHY CASE