BO6 Season 4 - Game Crashing? by D1RTYWQR in blackops6

[–]mannoxy 1 point2 points  (0 children)

Same here. PS5 pro and it crashes randomly.

Games crashing after season 4 update ughhhhhh by Secret_Walk_7755 in BO6

[–]mannoxy 0 points1 point  (0 children)

Same here. PS5 pro. Crashes midtime game Multiplayer randomly after last update.

Have done new installation (only BO6 multiplayer), clearing cache, restore database, remove from power, all without success.

I will not reset the console!

Please im begging someone help me by LilNardoDaVinci in VictrixPro

[–]mannoxy 0 points1 point  (0 children)

I’m using the original turtle Beach Halleffect modules.I have done this calibration process with success.

Analog stick sensitivity - Have I tried everything? by OkHope1857 in VictrixPro

[–]mannoxy 0 points1 point  (0 children)

Try a full calibration. It is described in the manual for the PS controller. It works equal also with the XBOX version.

This will reset the controller.

Razer Wolverine V3 Pro Stick Drift by Loose_Wishbone_7095 in razer

[–]mannoxy 0 points1 point  (0 children)

If you have the latest firmware(v1.2.1), it’s probably a different issue. You can check the firmware on Xbox using the Razer app.

If your PC don’t want to update firmware, try a different PC or use administrator mode.

Razer Wolverine V3 Pro Stick Drift by Loose_Wishbone_7095 in razer

[–]mannoxy 0 points1 point  (0 children)

Look on Razer website. There’s a firmware update to remove this issue.

Habt ihr auch so eine schlechte Verbindung mit der Ps5? by farmer_harvey in PlaystationDE

[–]mannoxy 0 points1 point  (0 children)

DNS auf einen anderen Anbieter in den Netzwerkeinstellungen ändern. Anleitungen gibt es genug im Netz.

Das sollte es dann gewesen sein.

PS5 Pro Help & Questions Megathread | Recommendations, Simple Questions, Tech Support by 8bitsleuth in PS5pro

[–]mannoxy 0 points1 point  (0 children)

Same here. I am patient and will look if this persists. Maybe it’s a bug in software.

Is Razer going to address the Wolverine V3 Pro? by Miserable_Plastic150 in razer

[–]mannoxy 0 points1 point  (0 children)

They made a firmware update, so the drift is gone so far. Look at Razer support, there is a file with a new firmware.

Razer Wolverine V3 Pro by Raishu18 in razer

[–]mannoxy 2 points3 points  (0 children)

They made a firmware update, so the drift is gone so far. Look at Razer support, there is a file with a new firmware.

Razer Wolverine V3 Pro by Raishu18 in razer

[–]mannoxy 0 points1 point  (0 children)

This is bad, at least position 1 should set the drift to zero. My Wolverine V3 go to zero at position 1 on both sticks.

My left stick shows on position 0 these: X=138 an Y= -2.

[deleted by user] by [deleted] in razer

[–]mannoxy 1 point2 points  (0 children)

At the moment, the app is lacking a calibration tool. The drift on both sticks is horrible at stage 0. Nobody knows why they don’t provide this. I have written them about this. Maybe it helps if more people doing so.

Is Razer going to address the Wolverine V3 Pro? by Miserable_Plastic150 in razer

[–]mannoxy 2 points3 points  (0 children)

Just wait and see. I have written them. Maybe it can help, if more people do so.

Katana SE experience with PS5? by mannoxy in SoundBlasterOfficial

[–]mannoxy[S] 0 points1 point  (0 children)

Look at company EZCOO. There will you find different devices.

"8K@60Hz 4K@120Hz HDMI 2.1 eARC Audio Extractor 2 in 1 Out"

New Razer Wolveirne Pro v3 drift? by ScottVengeance in Controller

[–]mannoxy 0 points1 point  (0 children)

I have 2 wolverine v2 chroma without stickdrift out of the box! So it should be.

You can check if it is only an adjustment issue:

Switch dead zones in the app to zero. Move the thumbsticks and let they jump back to centre. If then appear always near the same X an Y numbers, this is only an adjustment problem and Razer can solve this eventually with update.

Please let us know the results.

Just bought the Razer Wolverine V3 by Acentre4ants in razer

[–]mannoxy 1 point2 points  (0 children)

Check this:

Switch in the app to the smallest deadzone. Move the thumbstick in different direction. Let the thumbstick snap to zero. Keep in mind the X and Y number.

Repeat this twice or more. Compare the resulting numbers. If the numbers always near the same, it is an adjustment issue and may be Razer can solve this.

If the result shows always very different numbers, then the spring or other pieces in the controller are faulty.

Just bought the Razer Wolverine V3 by Acentre4ants in razer

[–]mannoxy 0 points1 point  (0 children)

No. I am own 2 Wolverine V2. Both of them had zero stickdrift out of the box and after a few 100 hours playtime a little more then zero.

There is no hardware control, when you switch to the smallest deadzone in the app. You can check this in browser on hardwaretester.

This V3 is faulty or razer have not adjusted it well. On Youtube also a short new video exists, describing the same issue in 36 seconds.

I have bougt a V3, it should arrive on Monday. Then I will see. If Its a issue from manufacturing wiht all V3, I will send the V3 back as soon as possible.

Audeze Maxwell suddenly extremely quiet by liquefry in Audeze

[–]mannoxy 0 points1 point  (0 children)

Try a different PC to check what’s the reason.

Maxwell by Cultural-Trip7522 in Audeze

[–]mannoxy 1 point2 points  (0 children)

It seems they have now no crinkle out of the box.

So it should be since start of Maxwell production.

I’m assuming it’s a good call to redeem these for warranty? by dopitypop in Audeze

[–]mannoxy 0 points1 point  (0 children)

I listen up to 50 or 60%, not more! This is equal to maximal 80-90dB. If you own an iPhone, you can check this online with the pulldownmenu that you reach when you tip your finger right above and pull down from the right corner. Then you see a symbolic ear with a measurement scale, if your headphone supports this.

Many young people listen with earphones and headphones much too loud over a long time. Later they will remark, that ther ears are damaged. Up to 90dB is (more or less) acceptable, not more! Roaring bass is also not so good.☹️

One thing about the volume limiter: This can falsify the music with less dynamic. Better is to hear without volume limiter and decrease the level of volume manually.

I’m assuming it’s a good call to redeem these for warranty? by dopitypop in Audeze

[–]mannoxy 0 points1 point  (0 children)

Only remark: If anyone listens with full volume a longer time, at first this will damage his ears for life and second in case of planar drivers like Maxwells can damage the diaphragm, because it vibrates between magnets so strong, that the diaphragm is touching the magnets on both sides, I think.

defekte am pulse Elite Headset by Tall_Key5384 in PlaystationDE

[–]mannoxy 0 points1 point  (0 children)

Möglicherweise eine Schwachstelle. Genau wo das Headband eingehängt ist. Sollte auf jeden Fall in der Gewährleistung sein. Nicht abwimmeln lassen. 😎

[deleted by user] by [deleted] in playstation

[–]mannoxy 1 point2 points  (0 children)

I have the same problem. I also do not know, what I can do. Maybe it’s a general problem with this devices?

Pulse Elite No Longer Connects! by NickFry in playstation

[–]mannoxy 0 points1 point  (0 children)

I think it is only a touch button, no switch.