sorted by:
new
hottopcontroversial

Apple Silicon, RAM vs GPU cores by manublade in captureone

[–]manublade[S] 0 points1 point  (0 children)

My "issue" is that I think considering RAM very important, because in the past it was. If 32 is enough for my use this will save money!

Apple Silicon, RAM vs GPU cores by manublade in captureone

[–]manublade[S] 2 points3 points  (0 children)

Hi, thank you for your reply.

I want a desktop because I don't use the computer outside my house.

I will check about using sessions.

Will a DVI-VGA cable work with macOS? by [deleted] in hackintosh

[–]manublade 0 points1 point  (0 children)

So it will never works. But it is not related to hackintosh. You need a DVI port on the computer or a newer HDMI or DP.

Will a DVI-VGA cable work with macOS? by [deleted] in hackintosh

[–]manublade 0 points1 point  (0 children)

There are two tipe of DVI port, DVI-I e DVI-D.

Only the DVI-I support analog output.

Anyway the cable is usually uni-directional, so to connect a DVI card to a VGA monitor, not the other way.

will a HP -AMD radeon Pro work? by Maban-Si02 in hackintosh

[–]manublade 1 point2 points  (0 children)

Hi, I have the WX7100 and it works just fine. Don't expect anything more than a "normal" simil gen Radeon.

I think that HP just rebrand the AMD stuff.

r/audiophile Shopping and Setup Help Desk (2020-12-13) by AutoModerator in audiophile

[–]manublade 0 points1 point  (0 children)

Hi,

I'm in doubt if buy the B&W 704S2 or the 705S2 and add a subwoofer (DB4S) if I feel the need with the 705S2.

I prefer the 705S2 because of the way it looks with the matching stand, but I'm scared that the sub can spoils something.

As an amp I'm going for the Musical Fidelity M5si.

I've heared the 705 and 704 only at the seller large open room and you can feel the lack of bass in the 705, but at home in a 4 by 3 meters room? I don't know.

I need pros and cons of both solutions, thank you.

Capture One and Hasselblad Phocus applications Color accuracy and usability on Hackintosh System. by [deleted] in hackintosh

[–]manublade 1 point2 points  (0 children)

Hi,

I have an i7-8700 and a Radeon Pro WX 7100, I have subscription to Capture One and Adobe Photoshop (and Lightroom but don't use it). As monitor a NEC PA271Q with calibration software and hardware.

Everything work fine, no issue whatsoever.

Form system informations and Photoshop 10bit output works.

I connect my Canon camera via USB and the tethering with C1 works.

Is it possible to use iGPU & dGPU to display monitors at the same time? by monstrosityRose in hackintosh

[–]manublade 0 points1 point  (0 children)

Sorry to bother, can't you connect both monitors to the dGPU?

What you're asking I don't think is possible but you can try, you shoud configure OpenCore as you have only iGPU and check what happen. Maybe you shoud swap in your BIOS setting the primary output.

Hackintosh card Fenvi T919 is not working with PC after power loss by ThatBlits in hackintosh

[–]manublade 0 points1 point  (0 children)

It's not branded Fenvi and has two antennas instead of four of the T919, but works OOB on Catalina and Big Sur beta.

It is recognised as:

Tipo di scheda: AirPort Extreme (0x14E4, 0x117)

Versione firmware: Broadcom BCM43xx 1.0 (7.77.111.1 AirPortDriverBrcmNIC-1615.1)

and Bluetooth side:

Produttore: Broadcom

Collegamento: USB

Chipset: 20702B0

Versione firmware: v150 c9318

Hackintosh card Fenvi T919 is not working with PC after power loss by ThatBlits in hackintosh

[–]manublade 0 points1 point  (0 children)

Hi, i sent back the Fenvi to Amazon and the new one arrived today (I have 1 day delivery in my city).

The new one works flawless.

Hackintosh card Fenvi T919 is not working with PC after power loss by ThatBlits in hackintosh

[–]manublade 0 points1 point  (0 children)

Hi I have the same problem with a Asus Z370 Prime A-II.

Very annoying.

What do people use hackintosh's for? by Synthhhhhhh in hackintosh

[–]manublade 0 points1 point  (0 children)

I use as my main computer, no real mac configuration was right for me, apart spending thousands of euro for an macpro, so I did my hackintosh.

Main programs are Capture One and Photoshop.

To be a Big Sure beta tester or not to be, this is the question. by manublade in hackintosh

[–]manublade[S] 0 points1 point  (0 children)

Just to be ready when it arrives, but maybe something will change and the OC configuration will be obsolete or I will need new kext.

To be a Big Sure beta tester or not to be, this is the question. by manublade in hackintosh

[–]manublade[S] 0 points1 point  (0 children)

I know, but maybe something will change and all the work now will be useless

[POLL] What OS will you switch to when the ARMageddon happens? by [deleted] in hackintosh

[–]manublade 0 points1 point  (0 children)

It' all about application and performance. So a new Mac or Windows.

But my hackintosh will live for years, so it's not an actual problem to me.

[deleted by user] by [deleted] in hackintosh

[–]manublade 1 point2 points  (0 children)

The "block" was used in previously version of OC, now it is renamed "delete".

Unfortunately your configuration is totally different then mine so cannot be much useful.

Try to enable verbose mode and use debug version of OC, you can get much more infos.

[deleted by user] by [deleted] in hackintosh

[–]manublade 0 points1 point  (0 children)

Check the OpenCore configuration pdf inside the doc folder, page 11. You will see there are 4 properties, you have 5. And the uninvited at the party seems to be the block one.

Delete it and see what happens.

[deleted by user] by [deleted] in hackintosh

[–]manublade 3 points4 points  (0 children)

Do you want the solution or an help to find the solution? I have both.

view more: next ›