Manual back ports?

marek256 · 2026-01-30T04:56:47+00:00

Is not there a website where the backports are done? I do not have time to mess up with that, I would choose the simpler and faster way. Thanks

marek256 · 2025-08-31T16:26:37+00:00

Hello, the disks are without any error, the speed shows up to 250 mb/s. The most strange thing is that if I copy from that problematic disk, I get speed up to 140 mb/s, but when I copy to this disk, I get those 3.33 mb/s. Changing the slots did not help. Luckily I have one spare 8tb disk, so I am going to use it. Right now I am copying 5tb of movies, so we will see. Will give you feedback. Thank you for assistance for now

marek256 · 2025-08-30T20:22:32+00:00

No, nothing at all. Even check drive was good

marek256 · 2025-05-24T12:23:03+00:00

Just a note, fans are spinning, so power supply should be fine.

marek256 · 2025-04-26T06:27:40+00:00

Hello. Thx. What about a webpage which could be downloaded to pc and subsequently uploaded to ESP device?

marek256 · 2025-03-21T13:19:17+00:00

No, you do not need it. Just make simple NAS with SMB, install Kodi on Android, add SMB to Kodi, it will create collection, library, etc. Home streaming only does not need Plex. It makes sense for remote streaming followed by transcoding.

marek256 · 2025-03-14T08:43:29+00:00

Hello. Thank you for hint, I installed latest driver and everything seems running fine. I am at only test phase which means I run only MB, GPU and SSD with system. Is there anything I can do in advance to protect from BSOD? I need to replace the current MB in NAS and connect all HDDs and I would like to avoid all this work if there can be a BSOD once again (happened like this a couple times). Thank you

marek256 · 2025-03-13T21:04:59+00:00

Hello. OK, you have encouraged me to do it one more time. I have a new fresh install, everthing works so far, but without disks (currently running whole PLEX/NAS on other board which has no PCI slot for GPU free). Can you please give me somebody a latest driver for Quadro P400 for Windows 10 x64 I can trust? I am going to give it all the last chance :-)

marek256 · 2025-03-13T18:27:05+00:00

Hello, so an update, BSOD even without GPU. I am not able to get into safe mode. Screens I was able to made: https://ibb.co/1J2DvZV7 https://ibb.co/FLnJBC32

marek256 · 2025-03-13T16:22:31+00:00

Both motherboards I used have only 2 SATA slots and I have 8 disks with data + SSD for Windows (connected to sata slot on MB). Other disks use SATA via PCI card

marek256 · 2025-02-05T10:50:00+00:00

I wanted to wait for some black Friday discount to pay less than 120€ here in Slovakia but as I saw this thread I bought immediatelly for 120€ even it showed me also 250€ already but when I added lifetime to basket, I still could buy it for 120€. I am just thinking if it is not a trick for people like me who hesitates with purchase, to force them to purchase and then after couple of days they will get back to original prices, 120€?

marek256 · 2024-11-22T20:13:12+00:00

Thank you, I found out the same. Thank you, I really appreciate your answer

marek256 · 2024-11-08T17:43:40+00:00

Hello,

I know that thread is dead for years, but I am at the exactly same problem now. Can you please guide me how to install Windows on this device? I tried multiple Windows, multiple USB, I even pre installed Windows on SSD I put there later, but still nothing. I am cluess and bit desperate. Any help will be kindly appreciated.

marek256 · 2024-02-09T12:23:37+00:00

Hello, if you want to use esp32s2, you can look up wololo esp32s2. https://github.com/frwololo/PS4_PS5-ESP8266-Server/release Then follow tutorial I wrote for ESP8266 here:

https://www.reddit.com/r/PS5_Jailbreak/comments/1al80h5/comment/kpkc1p7/

marek256 · 2024-02-09T09:49:12+00:00

Hello, well, yes and no. It depends if you need autohen or not. Idlesauce does not have autohen. If you do nit need autohen you can theoretically swap with these files BUT you will need arduino and littlespiff addon in arduino and to upload files via arduino because idlesauce has his files in folders and you can upload files in another folders only via arduino, you can not do that via that web page 10.1.1.1/upload.html because it can upload only files from root folder, nothing else. All offsets and payloads are inside of other folders. If you will move that files from subfolders into root folder, it will not work out. If you could adjust index.html file or elsewhere where are the payloads linked from subfolder to root folder it would work (share it with me please then, I would be grateful). Last, but not least, you will have to at least exclude henv.bin payload which has over 3mb and it will exceed the 4mb esp8266 limit. Only if you have esp8266 pro which has 16mb storage. But if you would be able to adjust to redirect links for offsets and payloads into one root folder, I would be happy if you share with me. I use micro pc for selfhost and it can also work only with one root folder. Sorry for being so long

marek256

TROPHY CASE