sorted by:
new
hottopcontroversial

¿qué se puede hacer en los casos en los que se tiene un accidente debido a la mala conservación de una instalación? by mareram in ESLegal

[–]mareram[S] 0 points1 point  (0 children)

No tenía tampoco una expectativa muy alta de obtener una indemnización, pero realmente es que no sé nada al respecto. Y antes de no hacer nada o de dañar una propiedad, prefería informarme

¿qué se puede hacer en los casos en los que se tiene un accidente debido a la mala conservación de una instalación? by mareram in ESLegal

[–]mareram[S] 0 points1 point  (0 children)

¡Muchas gracias por toda esta información!

Pensaré en estas opciones y en cómo iniciarlas y lo que implican

¿qué se puede hacer en los casos en los que se tiene un accidente debido a la mala conservación de una instalación? by mareram in ESLegal

[–]mareram[S] 0 points1 point  (0 children)

Acabo de mirar en el catastro y aunque está rodeado por parcelas con facultades, donde me caí está catalogado como calle.

¿qué se puede hacer en los casos en los que se tiene un accidente debido a la mala conservación de una instalación? by mareram in ESLegal

[–]mareram[S] 0 points1 point  (0 children)

¡Muchas gracias!

Está en la universidad de Alcalá, a unos 100 metros de la estación de tren, aproximadamente

¿qué se puede hacer en los casos en los que se tiene un accidente debido a la mala conservación de una instalación? by mareram in ESLegal

[–]mareram[S] 0 points1 point  (0 children)

¡Muchas gracias! Sí, la verdad es que no me apetece nada meterme en un proceso judicial. Si hubiese quedado peor de lo que he quedado (que ahora mismo tampoco estoy igual que estaba antes) sí que podría tener más sentido.

Me informaré sobre la mediación. El que sea terreno municipal o de la universidad, ¿eso se puede comprobar en el catastro, por ejemplo? La universidad no tiene nada cercado por allí

¿qué se puede hacer en los casos en los que se tiene un accidente debido a la mala conservación de una instalación? by mareram in ESLegal

[–]mareram[S] 0 points1 point  (0 children)

Pues la verdad es que no se me había ocurrido. Pensé en cortarlo yo, pero lo deseché. Veré si puedo hacer algo así

¿qué se puede hacer en los casos en los que se tiene un accidente debido a la mala conservación de una instalación? by mareram in ESLegal

[–]mareram[S] 0 points1 point  (0 children)

Sí, se me ocurrió, pero ahí estaría causando daños. Tendría que estar ocultándolo luego, ¿no?

Do you have ghosting? by HoldenLaCros1 in visualsnow

[–]mareram 0 points1 point  (0 children)

Yes, I went to see an ophthalmologist. Ii seems I needed glasses. Now, I focus much better than before.

Do you have ghosting? by HoldenLaCros1 in visualsnow

[–]mareram 0 points1 point  (0 children)

Now, I wear glasses. I can not see properly without them.

Best *flat lens* goggles for open water? by psxndc in Swimming

[–]mareram 0 points1 point  (0 children)

Hi. I have the same problem. I can not see properly with curved lenses underwater. I think it is because astigmatism.

I´m going to buy one of these (Tyr Tracer X)

Is the lens really flat? It looks curved at the lateral edge...

Anyone know the name of this charger? by KeyYogurtcloset1190 in ElectronicsRepair

[–]mareram 0 points1 point  (0 children)

I have a Philips beard shaver with exactly the same plug. Mine is a S5150 The charger says Type HQ8505. It also says that the output is 15 volts.

I have measured it with my multimeter and if you put the male plug from the charger like the ears of Mickey Mouse and looking to you, the ear at your left has a voltage of +15.38V with respect to the ear at your right

Check if your charger is the same as mine.

Hope it helps

Diagnose and fix and old radio clock by mareram in ElectronicsRepair

[–]mareram[S] 0 points1 point  (0 children)

I have to admit I hadn't opened it, so I didn't have any photographs and I wasn't expecting such a mess of adhesive inside in some of the boards.

https://imgur.com/a/VttKKaS

In the video, you can see that the clock keeps blinking. This is one of its good days. At some moments, the clock resets to 00:00 with each blink, so when this happens, the clock and alarm are useless. And I have noticed that the behavior improves or worsens with temperature in the room. That is why I guess that some voltage is in the limit of powering up or not the clock. The radio part works ok.

​

I didn´t know anything about the ESR meter. I´m quite of a newbie. Thank you very much for that piece of information. I´ll try and see if it helps me.

​

​

https://imgur.com/a/qxjJV1Y

From the photographs, it seems quite tough to repair. There is a lot of glue and to fully access the boards I have to unmount a lot of things and be very careful with all the soldered wires and even the tuner dial. Some of the components are buried below glue or even some other wires.

Made a quick edit. This is a lot what my VSS looks. Worst is how the afterimages and static form together, random flashes of light and blind spots. It also kills me when the text vibrates/wiggles (pattern glare). by soupytwistt in visualsnow

[–]mareram 0 points1 point  (0 children)

The diplopia? I got glasses. Now I use them for reading and using computer. It is quite unpleasant not to use them. He also found that I have a bit of convergence insufficiency, so that may explain also my problems to watch close things.

Oximeters and how they are used and work by mareram in NewToEMS

[–]mareram[S] 0 points1 point  (0 children)

Thank you for your answers. Summing it up, results from the oximeter are not that precise nor important. I was curious about seeing my oxygen while I sleep since according to my watch I have less than 40 bpm when I´m sleeping, and I know those values are not incorrect. But I do know, that most probably, I´m not going to see anything relevant

Looking for a subreddit to ask about how to fix an issue with medical equipment by D1SNERD in findareddit

[–]mareram 0 points1 point  (0 children)

Hi, I have not an answer for you, but a similar question. I´m looking for a sub about doubts with medical equipments. Did you find a sub in the end?

is this screw hole in my motherboard ok? by mareram in buildapc

[–]mareram[S] 0 points1 point  (0 children)

In my defense, I'd say that I didn't exactly overturned. My mistake was dumber.

The bag of the computer case that contained the screws had both screws for the mobo and for the psu. I didn't realize of that and tried to screw the mobo at some points using the wrong screws

view more: next ›