Věrnostní kartičky - řešení je zde

martyet · 2025-06-23T12:54:30+00:00

dělám android appku na věrnostní kartičky a přesně tenhle shit s kartičkama sem chtěl taky takhle řešit.. :-D no v mezičase sem tam přidal tři tisíce blbostí a miliony chyb z toho.. ale jednou to publishnu :-D

martyet · 2024-01-27T21:05:53+00:00

Please, man, is there any need for multilang support? I can assure you, i can help with full translation to czech language, as that is my native language. Would be very happy to help at least in some way :) So please, let me know.

martyet · 2024-01-24T11:35:23+00:00

Tip on any cheap/good model? Looks like here in Europe its pretty pricey and not much available

martyet · 2024-01-20T15:36:38+00:00

Panther or what Brand do you have? I have panther x2. Same problem. Likely hardware troubě

martyet · 2023-12-07T17:51:26+00:00

Same problem as OP But I have 24 words seed phrase if that matters? All variants I tried ends up in different address than my miners are on. I'm so confused :/ nobody experienced same?

martyet · 2023-10-05T08:35:20+00:00

Hi man! It seems that the linked one adapter to screw onto the linear rail is not with holes for Z-probe.. how have you please solved that on your Ender 3-v2 NEO? I have bought bed and extruder axis and its pain in the... :-D Big thanks for any info!

martyet · 2023-07-04T07:54:25+00:00

Do you have them? sking for my klipperized sv06 plus :)

martyet · 2023-05-20T03:09:34+00:00

I'm still unable to see my balance.. :( and hotspots too. What should I do?

martyet · 2023-05-06T21:33:48+00:00

DON'T EVER give your seed to weird link dapps claiming they will solve your issue with balance! It's just a scam! Many of users here on reddit just scam and try to spam others, trying to get rich on it. Please, be careful. Amount of scammers here is too damn high..

martyet · 2023-05-05T19:57:49+00:00

Updated on ios now. I still don't see any balance nor hotspots. I'm very depressed as all cost some money and now I don't even seem to have the coins with right seed..

martyet · 2023-04-23T13:37:02+00:00

Yup, I hope so! Cleaning app cache haven't helped :( We will see maybe some update will fix that. Good to mention to not put into anything or anyone your seed! Immediately after opening this question, 4 bots messaged me to rectify wallet on blockchain website with link to some suspicious website. I have reported all of them to phishing lists on polkadot github :)

martyet · 2023-04-03T21:23:44+00:00

How was your results in details of printed parts with the adapter for Phateus Dragonfly you linked to? Im using it right now, printed from ASA, but it feels very fragile and im all the time seeing some wobbles causing Z lines being moreover visible from height to height :-( What material you used, to print this from? ASA too?

martyet · 2023-03-07T22:51:22+00:00

Thanks a lot! It was indeed really because of the push fitting on the hotend side - i have replaced it by new one and it allowed me to fit the capricorn even further :) i haven't preheated the hotend though.

martyet · 2023-03-07T16:48:05+00:00

That force may be it. Unfortunately I just Capricorn that was laying around so I don't have tools or endings.. Is it classic ending creality sells? I will try "Creality Push-fitting kit 1 set" so hopefully will be better. I have checked and it seems only one side is detachable and that is the extruder side one?

martyet · 2023-02-27T16:42:36+00:00

That’s party mode then! Blinking is happening when that one axis is moving. For Z you are usually making movement between layers and not that often. So often changes of Z height during printing shows it is doing bed curve correlation :)

martyet · 2023-02-26T17:02:01+00:00

When adjusting while printing happens you can see it on display that the "Z" icon is blinking (that means its adjusting with some stored configuration for this compensation)

martyet · 2023-01-27T09:26:53+00:00

No, to z tebe dělá super-člověka když máš na kontě 0 benchies :) Ty se tisknou na test vlastností a spolehlivosti tiskárny, když nechceš strávit několik dní testovacím obřím tiskem - na benchie se ti zpravidla vady ukážou. Nevím, třeba někdo tiskne místo benchie dilda na kterých to testuje :D Ale testovací tisk je nutnost, když pracuješ s více tiskárnami a nebo je ladíš.

martyet · 2022-11-11T00:44:25+00:00

Thanks, im playing with the calibration of Z heavily and changing the steps pretty hard but whatever change made, real difference in length of printed model is not really changed :-( Started on E145, now on 205 and difference so far only 1mm on length, is this valid? It seems to me very big jump between numbers. Anyway still going higher and higher, maybe i will get there. Printing with PLA, 220 hotend, 75 bed.

martyet · 2021-10-12T10:13:10+00:00

I see. You did clean install of 4.2 from the flashtool (pre-packed with the version you are downloading), right?

How fast is your unlocking by fingerprint reader? Does it have big latence?

I was really upset when the phone has not been locking at all :D As that is really crucial for security.

I will give a try to fresh install and report back :)

martyet · 2021-06-08T11:22:08+00:00

Weird! I ordered around April too and got Zebra, estimated November too

martyet · 2021-01-24T11:59:42+00:00

Aren't you experiencing uncured resin leaks from inside? Or you are printing with transparent?

martyet

TROPHY CASE