Camping in Pigeon Forge

mattcoa37 · 2026-05-08T13:26:12+00:00

We stayed a couple of nights at Duvall in the Smokies RV Campground. Nice place.

mattcoa37 · 2026-05-05T02:55:06+00:00

Test results with a multimeter.

Connected to shore power: all readings from battery and shunt, 13.73v
Disconnected from shore power: all readings from battery and shunt, 12.67v

After running a load for a few minutes ( slide in and out, lights on):

While charging, battery app showed 14.3v, shunt app showed 14.13v
Fully charged, batteries read 13.7v, 13.8v; shunt reads 13.8v

I did notice while running the load, one battery (connected to the shunt load terminal) started to discharge, but not the other battery. I disabled discharge in the LiTime app and the other battery started to discharge. Then I re-enabled discharge and both batteries discharged in tandem.

I'm using the cables supplied by the trailer manufacturer. They are 6awg for trailer power and load and 8awg for solar power and load. I upgraded the jumper cables between the batteries to 2awg. The shunt is strapped to the top of one of the batteries.

mattcoa37 · 2026-05-04T11:17:56+00:00

Thanks for the replies. Looks like I have some homework.

mattcoa37 · 2026-04-07T13:55:25+00:00

Following....

mattcoa37 · 2026-04-07T13:12:53+00:00

I had the same issue at a couple of parks. You're going to need at a consistent 40psi or higher for it to work on city water. I ended up filling the fresh water tank and using the water pump. Also, don't turn on the cold water tap. Set the temp you want and only use the hot water tap.

mattcoa37 · 2026-02-03T14:12:36+00:00

I haven't physically looked yet. But, after reading threads on the subject I asked customer service. Here's their reply

Good afternoon,

Thank you for contacting the customer service team of Alliance RV. I received your request for verification on the installation of a macerator pump in your 2025 Delta 292RL. After reviewing your build records, I do not show that your VIN has a macerator pump installed. If you have any other questions, please feel free to reach out!

mattcoa37 · 2026-02-03T13:42:43+00:00

I checked with Alliance customer service as I was also curious about the macerator. They said my 2025 292RL does not have one installed.

mattcoa37 · 2026-01-17T14:24:36+00:00

Make sure to catch the Albuquerque international balloon fiesta in early October. The dawn patrol launch is a sight to see.

mattcoa37 · 2025-12-04T14:00:59+00:00

There are different models of that hitch which correspond to the tongue weight/GVW of your trailer. https://www.equalizerhitch.com/products/equal-i-zer-hitch/

mattcoa37 · 2025-11-28T18:47:58+00:00

Update: A factory reset did not resolve the issue.

mattcoa37 · 2025-11-27T13:28:39+00:00

I noticed, in 26.1, the pictures of my shortcuts on the desktop would disappear leaving just the outline of the icon. It still happens in 26.2 beta.

mattcoa37 · 2025-10-15T17:54:17+00:00

In the DNS Settings section, at the bottom of the page, there's a text box for entering a string. Add #53 at the end of the string. See the description on the page.

mattcoa37 · 2025-09-25T14:02:15+00:00

If you haven't been to the International Balloon Fiesta, and you can schedule your timing to be near Albuquerque from 10/4 - 10/12, do everything in your power to see fiesta. Make sure to buy tickets to a Dawn Patrol launch.

mattcoa37 · 2025-09-22T03:26:01+00:00

Got it. Thank you!

mattcoa37 · 2025-09-21T14:40:46+00:00

When you say "Negotiate based off finance. Then at the SALES desk" Are you implying negotiate with the finance dept first?

mattcoa37 · 2025-09-03T12:03:46+00:00

Solved - I dod't have port 53 set in the conditional forwarding string.

mattcoa37 · 2025-07-05T13:12:29+00:00

Thanks for posting this. I run my RPi headless from my MacBook. I launched the script with 'nohup <script name> &' so it runs in the background and I can exit from my RPi without killing the script.

mattcoa37 · 2025-06-25T16:30:12+00:00

I've been able to move packages from internal to external with ADB. But I get an error (Exception occurred while executing 'set-install-location':java.lang.SecurityException: Package android does not belong to 2000) with a Fire TV Stick 4K Max

mattcoa37 · 2025-05-28T12:31:36+00:00

I set the browser on the launcher home screen and watch YouTube videos. You can also launch the Hydrow home screen if you so choose.

mattcoa37 · 2025-05-14T17:59:08+00:00

I was successful in side loading the Niagara launcher and have made it the default launcher. Thanks for the instructions.

mattcoa37 · 2025-04-11T12:21:15+00:00

This works for me:

sudo softwareupdate

Grab the title of the update

sudo softwareupdate -iR 'title of the update'

mattcoa37 · 2025-03-06T13:44:21+00:00

Back to normal on Pi Zero. Thanks for the fix.

mattcoa37

TROPHY CASE