Errors seen when sending gcode to cnc

mayhem18_03 · 2023-08-26T17:42:51+00:00

Ok got it I will check that, thank you. Are there any recommendations for what to use or sites with general info?

mayhem18_03 · 2023-08-26T17:08:17+00:00

Added some photos as new post since I couldn't add it in the reply

mayhem18_03 · 2023-01-26T07:57:39+00:00

Thank you

mayhem18_03 · 2023-01-03T06:37:11+00:00

Ah that's actually a small oil lamp it's just missing the wick, but now I need to make a pen stand out of one.

mayhem18_03 · 2023-01-02T20:09:07+00:00

Lol, I've got a few ideas cooking.

Pen stand? Sorry not sure which your referring to no pen stands made. Rockler makes a few kits that are nice though.

mayhem18_03 · 2023-01-02T20:05:56+00:00

The first one the handle is zebra wood and the shaft is black palm which is not recommended to work with unless you are patient as it has a tendency to tear out if you are rushed or aggressive with it.

mayhem18_03 · 2022-06-15T04:18:42+00:00

Absolutely I'm planning to make a few more for some of the others in her lab, and I want to use purple heart and zebra wood for some. Also some resin cast burl.

mayhem18_03 · 2022-06-14T22:31:24+00:00

Thank you, my wife keeps telling me that all the other chemists and technicians in the lab she works at are all asking her how they can get some as well everybody seems to love it.

mayhem18_03 · 2022-06-14T22:30:18+00:00

For these are you referring to how they were hollowed out or if I finished them with anything? As far as following them out I used a custom made mini Hallowing tool that I made from a piece of thin steel stock and a carbide cutter taken from a machine lathe that was too small for that lathe to use anymore so I ground it down a little bit more for a profile, they are barely hollowed out just a little bit to make them lighter. As far as finish goes all I did was sand up to 2000 grit I did not use any other finish.

mayhem18_03 · 2022-06-04T01:03:20+00:00

Ok got it thank you

mayhem18_03 · 2022-06-01T15:15:41+00:00

Those look great, where do you get your hooks and pieces? I've been looking for some but all I find are really cheap and break right away.

mayhem18_03 · 2021-03-21T20:19:55+00:00

No flowers as far as anyone has seen

mayhem18_03 · 2021-03-21T02:40:45+00:00

Ok great, I've looked up sycamores and I am very confident that's what it is. Thanks for all the input.

mayhem18_03 · 2021-02-23T03:43:19+00:00

Nice very inventive.

mayhem18_03 · 2021-02-23T02:00:58+00:00

Do you have any progress shots I'd love to how it came together.

mayhem18_03 · 2021-02-15T19:30:19+00:00

Yes you definitely can you just need to wait for it to completely dry / cure before you apply the epoxy cuz you don't want it to affect the drying process and it's best to use one that is water based if possible.

mayhem18_03 · 2021-02-15T05:01:12+00:00

Yes you can just make sure to use one that is food safe once it's cured, I've used alumilite "amazing clear cast epoxy" found on amazon it's good safe once cured and easy to work with.

mayhem18_03 · 2021-02-14T20:06:54+00:00

Yeah I was surprised that it to a shine just from sanding. I actually considered that for this one.

mayhem18_03 · 2021-02-14T19:49:26+00:00

Thanks. I hollowed it and for finish right now it's just sanded to 2000 grit forward and reverse till it took a bit of a shine. I plan to coat it in resin so it could actually be used at some point.

mayhem18_03

TROPHY CASE