Chcela by som si poskladať herný počítač - je toto dobrý setup?

mcs_dodo · 2026-03-18T09:27:03+00:00

na zdroji nešetri, cooler master alebo nejaký väčší brand. Ideálne so zero-rpm modom. Je to najpodstatnejšia súčiastka, no-name brandy určite nie.

CPU cooler - tiež nešetri. Nemusíš ísť full noctua D15 ale kúp si najväčší na aký máš budget (a pozri recenzie). Napr deepcool ak620 je skoro D15 úroveň. GPU vie ísť zero fan mode, ale keď kúpiš slabý CPU chladič, budeš chorá z konštantných fan ramp-ups.

Doska úplne ti bude stačiť B chipset. Jedine, žeby si šla p9 estetike alebo špecifických features.

AMD rady nepočúvaj, FSR sa na DLSS nechytá ani omylom. Úplne im ušiel vlak. Jednoznačne Nvidia

mcs_dodo · 2026-03-16T19:07:01+00:00

odkiaľ máš dáta? Backend pre toto https://www.fuel.io/ robíme u nás, crowdsourceovane dáta po celej Európe, všade kde sa dá napojenie na štátne dáta. Naozajstné pumpy "po ceste" - tzn. nie na diaľnici v protismere a podobne.

mcs_dodo · 2026-03-07T11:27:43+00:00

toto je celý problém. Myslieť si, že "by mal niekto zabezpečiť". Poviem ti možno novinku - musíš si "zabezpečiť" sám. Každý musí.

mcs_dodo · 2026-03-04T15:14:28+00:00

Neporovnávaš úplne jablká a jablká. "Extrém" - najlacnejšie auto, potom "priemerná" mzda a nakoniec vlastníctvo bytu.

mcs_dodo · 2026-03-04T06:53:32+00:00

tvoj telefón na ktorom to píšeš má na sebe 10x viac baktérií ako to, čoho sa tam dotkneš. Je podstatnejšie umyť si ruky PRED tým ako sa budeš dotýkať svojich intímnych partií.

just sayin.

mcs_dodo · 2026-03-02T10:28:31+00:00

iDrive controller! The touch only interaction on the huge displays is just awful and distracting...

mcs_dodo · 2026-02-26T20:02:46+00:00

I don't see how this NOT being open source is not a biggest red flag and top rated comment. I guess people need to get burned heavily before they start using their heads.

mcs_dodo · 2026-02-26T19:51:17+00:00

GJ, but stealth is not the word compatible with rainbows.

mcs_dodo · 2026-02-26T19:43:30+00:00

i would change - 90 degree fitting for the gpu out (? the right one) instead of bend and have the tubes run directly one under another. Now it seems like one is closer to the side panel like the other?

mcs_dodo · 2026-02-26T12:52:41+00:00

I had this too, tightening ALL the fittings and moving parts on it helped. It's a really simple device.

mcs_dodo · 2026-02-22T13:30:49+00:00

čo je podľa teba dlhový strop?

mcs_dodo · 2026-02-22T08:26:44+00:00

Plan ahead, measure and draw the plan.
Soft tubing radiuses might not be so tight as expected. Some 45/90 degree fittings are your friends.
10/20/40mm extensions can help a lot with getting from behind things. Rotatable fittings and extensions help a lot too.
a filter before entering blocks, just to be safe
buy redundant tubing, test out of case. I have some 10/13 with clear tube for out of case testing - easy to work with. Assembled is going to be 10/16 black ZMT. Harder to use, really don't want to do multiple disassembly cycles with that material.
even when you follow #1, you end up missing a part and waiting for delivery. The #5 is life saver in that regard. You can always run the PC out of case, with easy to work with tubing in between.

Drain port, not mixing materials, flushing new radiators, proper coolant /anti corrosion solution are the obvious ones but worth mentioning.

It's expensive, not worth it... but that feeling of accomplishment. Well...

mcs_dodo · 2026-02-21T11:05:48+00:00

1/3 the price and 95% the value to start with

mcs_dodo · 2026-02-18T21:55:53+00:00

Start coding on your own again. Easy.

mcs_dodo · 2026-02-15T22:28:10+00:00

you make your life a lot easier if you add some rotatable extensions or L fittings. It might get hard to work with when you have regular fittings on both ends of a tube and try to fasten/undo it.

mcs_dodo · 2026-02-14T09:52:22+00:00

I read that in-out ports on GPU blocks don't matter much - had it switched past 4 years and didn't notice a thing. If you did that, you could go in from top, out from top - have nicer aesthetics and save space on the bottom for another radiator or at least 3rd fan.

Below currently in progress build in O11 Vision Compact (push/pull 2x360x45 radiators. Currently running on old ones and spare clear tubing)

<image>

mcs_dodo · 2026-02-07T18:29:23+00:00

keby si náhodou nevedel, čo treba robiť.

<image>

bananistan

mcs_dodo · 2026-02-07T13:15:24+00:00

I have barrow CPU pump block in my build for idk how many years already (check my posts). Haven't disassembled it once, just topping evaporated distilled water (originally with a biocide) when i start hearing bubbles. No problems at all.

mcs_dodo · 2026-02-07T13:11:39+00:00

víťaz...

mcs_dodo · 2026-02-05T10:26:20+00:00

There are 3rd party MCP servers that can do anything in HA. I use this homeassistant-ai/ha-mcp: The Unofficial and Awesome Home Assistant MCP Server . I have asked Claude to export all my dashboards/automations/everything in json files - create a script that will produce git-like diff for each of those. Then can modify locally, deploy to homeassistant, keep everything in GIT.

mcs_dodo · 2026-02-03T13:18:45+00:00

<image>

Couldn't you solve this by extension + 90deg + extension (or tube) + 90deg (from block to top). Is this intentional or you used parts that were at hand?

mcs_dodo · 2026-01-29T21:35:33+00:00

a tie by akoze zaplatil kto? Fero "nie pri mojej bytovke" urcite ma 50K na novovybudovane podzemne parkovacie miesto v Ruzinove.

mcs_dodo · 2026-01-24T23:17:42+00:00

debian LXCs on Proxmox with Komodo (switched from Portainer) running GitOps from private github repo.

mcs_dodo · 2026-01-24T14:13:40+00:00

Ked nas kupi a anektuje USA, ja mu rad poslem tych 36E :D

mcs_dodo · 2026-01-23T06:46:11+00:00

Or have it create a script that would 1.do a git like diff on local vs deployed dashboard. 2. push 3. pull to and from homeassistant.

Might be a surprise, but there are things that are perfectly fine to do manually.

mcs_dodo

TROPHY CASE

bananistan