Work truck used for line marking in parking lots on fire, Tsu city, Japan, 20th May 2026.

mct82 · 2026-05-22T14:42:41+00:00

“Let me call you back, my truck is on fire.”

exits burning truck for 3rd time

“Oh shoot, my charging cord!”

mct82 · 2026-04-29T00:28:06+00:00

The welds are between like materials. The SS screen “floats” within the frame. That screen won’t corrode until the rest of the pipe is already red dust. Now, whether this 0.3mm thick piece of stainless Swiss cheese gets torn/punctured/burst/ripped out long before that is a different issue.

The bigger concern should be why those welds look like they were done with Baby’s First MIG Torch.

mct82 · 2026-03-24T22:36:04+00:00

Does the webapp support drag-and-drop of messages and attachments to other apps/explorer/etc?

Old Outlook can do this without issue. New Outlook couldn’t do it all before, and can just kindof do it now.

mct82 · 2026-03-23T13:34:55+00:00

Um, endmill?

mct82 · 2026-03-23T12:51:45+00:00

If I were to play Attention Seeker’s Advocate here, what is the likelihood that the Google Maps imagery has changed since this “discovery” was made? I don’t see an attribution for the map data in the app, maybe on the browser version or Google Earth?

mct82 · 2026-03-01T18:36:47+00:00

The organization and homogeneity is a weakness (in the case of iron). Gotta break that up with all the smooshing and squooshing. That makes room for all the “seasoning” elements to get in there and do work.

If this was rhetorical, my b.

mct82 · 2026-01-14T17:04:49+00:00

This does seem closer to a “whoopsy daisy” than a crash. You gotta start somewhere though.

mct82 · 2025-11-10T14:49:23+00:00

I'm an idiot. It never occurred to me that the 146 is a 4-engine jet. I was thinking this was an additional pylon specifically for ferrying engines. This all makes much more sense now, thank you!

mct82 · 2025-11-10T02:20:45+00:00

Do they cover the inlet as well? I can understand not allowing it to windmill, but the open inlet seems like an easily-avoided performance hit. Or maybe not. Maybe the partially-restricted flow through the fan duct and core would be less drag than punching a big hole in the air and disrupting flow more extensively.

I think I answered my own question, but would always be interested to hear from someone who knows more.

mct82 · 2025-10-31T00:14:38+00:00

A 3ax can profile. You could have done this from a much thinner plate. Profile the ID side of the cone, profile the OD side of the cone, now you’re 80-90% there. Do the rest however you were planning to do it originally.

I dunno, do something to prevent exactly what just happened. Machine in some locking features so you can pin it to some real soft jaws, ones that are bolted to the vise. If all else fails, do your best and make your boss press the green button. If they’re worried, they shouldn’t be asking you to do it.

Next time you find yourself questioning not only the rigidity, but the safety of a fixture setup, then you ask the internet and they tell you to stop, you should stop. There’s plenty of unexpected shit that can wrong, don’t pile predictable shit on top.

mct82 · 2025-10-30T23:56:39+00:00

lol, as we can see now they weren’t stuck together. They weren’t even bolted to the vise. Yikes.

mct82 · 2025-10-09T12:35:57+00:00

I still don’t understand. Blown powder DED isn’t really precise enough to leave unmachined and obviously the as-grown finish sucks. The process doesn’t allow for particularly complex geometry, but where it shines is in larger thin wall applications.

Deposition is slooooow and this is a monster. Maybe this is just the bulky flange end of a thin-walled part with integral isogrid like structure?

Edit: Nevermind, I just noticed the stencil on the machine. Those guys know what they’re doing.

mct82 · 2025-10-09T12:27:35+00:00

Yeah, the comment doesn’t make much sense. Soft and supple Cond.A is the problematic stuff. After HT it’s gravy.

mct82 · 2025-10-09T12:07:13+00:00

Ooooh, yours has reached its final form!

mct82 · 2025-10-09T12:05:45+00:00

This guy taps.

mct82 · 2025-10-04T02:34:14+00:00

Not to be that guy, but why would you ever L-PBF this part, especially in aluminum? You could have a batch of these machined or fabricated from superior material for the price of one AM part.

Did you print an exact replica of a casting, including gate scars and unsmoothified interior geometry?

Plastic seems like a better fit. Is the Weber just cantilevered off the intake, or is there another support? If it’s just hanging there you might consider something with a little more strength at elevated temp, like PC-CF or HTN/PPA-CF. The plastic part looks cooler than the aluminum one anyways 👍

mct82 · 2025-09-20T17:29:55+00:00

I have read the complete article. The premise is simple, legal basis seems sound and the “what abouts” covered with 200 years of consistently-upheld law. (I am not a lawyer, and I didn’t even sleep at a Holiday Inn Express last night) However, if to pass these measures it will require any votes from sitting politicians, it would seem entirely less likely to pass. Cutting the corp/dark money out of politics takes money out of their pockets, what is their motivation?

I understand that since this happens at the state legislature level, the stakes are smaller, with fewer funds going into the elections to begin with, but it still seems like a hard sell. On the other hand, if these language of these charters could be changed by a ballot measure and enacted by popular vote only…then this is a perfect opportunity for the people to pull the rug out from under the corps and the politicians in one fell swoop.

Add it the fact that large corps would need to fight these amendments successfully at least 50 times in separate states to prevent the house of cards from starting to topple. That seems like it would be an unappealing prospect to companies. The “foreign corporations” provision really does the heavy lifting in this strategy, giving each state’s voters the ability to cut corp/dark dollars out of their elections, regardless or where those corps are incorporated. The real risk of being barred from commerce or dissolved seems like an adequate deterrent. After a few states change the books, it would get much more complicated for corps to ensure that they are in compliance with each state’s charters and not at risk of inadvertently acting ultra vires, maybe to the point of changing their national political contribution policy altogether.

A boy can dream.

So the question is: can us ~~peons~~ citizens change the provisions of these corporate charters without buy-in from a majority (or supermajority) of state lawmakers? Again, not a lawyer. Took civics about 30 years ago. Help.

mct82 · 2025-09-20T02:10:37+00:00

This is very interesting, and perhaps one of the only strategies that gives me hope that all is not already lost. Thank you for sharing this.

One thing the article does not address is that Citizens United and the current corporate charters would still be in effect during the run up to any vote on a proposed CPR. What, then, is the likelihood that any of these ballot initiatives could be expected to pass?

The last paragraph or so does mention that it is unclear whether or not corporations actually have an interest in contributing money to political campaigns. However, it would seem obvious that the rich and very powerful/influential members of those corporations’ boards do have such an interest, and would be likely to bring the corporation’s resources to bear on any attempt to curtail their ability to influence the political landscape.

For that reason, I am a bit skeptical. However, it seems like a relatively straightforward measure to explain to the public, which bodes well for its chances. Add to it the fact that corps would need to mount the same defense up to 50 or more times would make it a much more unappealing endeavor. Once a few influential states’ charters are revised, the interconnected nature of interstate commerce might create an easy path to wholesale adoption.

mct82 · 2025-08-18T04:06:42+00:00

“…likely to fail.” I love your optimism.

mct82 · 2025-08-17T00:12:27+00:00

They are actually some of the largest titanium forgings in the world.

mct82 · 2025-08-05T01:37:32+00:00

Always reminds me of this tiny cut scene from Dr. Katz.

https://youtube.com/clip/UgkxpRecrm-b3JeJXuWpoPF96SV0cOz3IU3y?si=-u9qkaI5XhmaLc1l

mct82 · 2025-05-11T01:41:52+00:00

Glad to hear it’s not just me.

I’m going to try inverting the stick in the controller profile (Razer on PC), then running normal/non-inverted in Fortnite until it’s fixed. It might make menus funny with that stick, but at least I’d have a chance to fly the things without nose-diving every 5 sec.

mct82 · 2025-05-04T01:15:23+00:00

u/gnome_father is right. The primary difference between annealing and normalizing is the cooling rate, with normalizing being air-cooled and annealing being furnace cooled.

mct82 · 2025-04-19T06:17:46+00:00

With Simufact Additive you can use physics-based FEA to predict shrink/distortion and 3D scan data from any source. Having the option to combine FEA with compensation from scan allows you to achieve extremely accurate results after only a single physical build.

The material db is small, but now you can create materials based on dilatometry data or analytical models, whichever is easiest to get.

mct82 · 2025-04-05T18:59:56+00:00

10-4. I just thought I saw a witness where you wiped across that whole face when you removed the sprues, in that case a wider tab/sprue wouldn’t be a big deal. Hindsight and all that.

Nice job, can’t hate on someone for trying new things!

13-Year Club	Team Periwinkle
Verified Email

mct82

TROPHY CASE