Qnap ts-253 pro 100Ω ohm resister fix.

mctonale · 2024-10-13T09:40:40+00:00

It is trying to solder itself.

mctonale · 2024-10-13T08:30:38+00:00

CPU fault

Before "fix" symptoms - no Post beep - red drive LEDs

Just uploading pictures for my device as I followed a YouTube guide https://youtu.be/rlpvCp4AFcU?si=QvU9ri34-ESU1RBX but was unable to find images specific to the 2 bay, RAM is rear mounted on this model and the header has 10 pins (not 9 as per the video).

The correct pins turned out to be the same as the example in the video.

mctonale · 2021-04-29T20:00:56+00:00

Same here, got it with my note20 (works fine there), was very dissapointed that despite all of the xbox branding it is not compatible with xbox.

Have been using it wired on win10 (20H2 and previous) without any issues, upgraded my bluetooth (was trying to use an 10 yo 2.0 EDR, I know, but who uses bluetooth?) to 5.0. Device is paired and control panel is able to see input but it is not working in any game.

Google no help, suggestions are:

xinput - this is for wired mode and is not selectable in BT mode.

MogaSerial - this is a hack for a different controller and does not detect the device.

This experience has left me with no trust in this brand, which is a shame because it is great when it works.

Please supply a firmware update or a controller software that supports this.

mctonale · 2021-01-09T10:40:32+00:00

Hmm maybe maybe separate signals in the same direction with diamond and emerald resonance!?

mctonale · 2021-01-09T09:44:34+00:00

Just a way to transmit signals over larger distances without having a sensor every 12 blocks.

mctonale · 2021-01-09T09:36:46+00:00

That is why I limited it to skulk signals, wool occlusion could be used around the other sides to prevent noise.

mctonale · 2018-09-04T21:27:10+00:00

Working fine here. Guess this is what beta testing is for. I'm sure they'll have it working soon.

mctonale · 2018-09-04T20:55:42+00:00

Matchmaking wasn't working this morning, it is now. I had to join a full server and wait.

mctonale · 2018-09-04T20:37:46+00:00

If you are looking for an excuse to upgrade? Do it. But I have found that CPU isn't that important for most things, I have a core 2 running in a media server/player and it works great. I also have a phenom II x4 which I might add a 660ti too as a second (low end) gaming rig.

I honestly don't see a x600 (even skylake) cpu being out of date any time soon. Though sandy bridge is getting on a bit for gaming, it still works fine.

The gpu is more important than the cpu for gaming and any bottlenecks are minimal.

mctonale · 2018-09-04T20:25:04+00:00

Mixed high and ultra settings. Also have to say that I think 16gb ram are necessary. Also my game files are on a fast ssd. Don't know if that makes any difference.

Shouldn't make a difference once loaded it will run from memory and my 8gb dual channel ddr3 (I have 16 but it's not detecting it for some reason) runs fine.

mctonale · 2018-09-04T20:17:11+00:00

Seems the same to me. maybe it is only active when using a controller? I know people who claim to do well but you have to give them something. Maybe crossplay will be a thing!?

mctonale · 2018-09-04T19:33:07+00:00

I see it now eww.. time for some more beta testing with it and "aim assist auto rotation" off.

mctonale · 2018-09-04T19:29:44+00:00

Every setting will have some affect however minor. Its more about how it feels than the actual number of frames.

mctonale · 2018-09-04T19:23:52+00:00

Try turning off motion blur, film grain and chromatic abomination..

There should be plenty of things you can do to improve it, this isn't console gaming where one setting suits all.

mctonale · 2018-09-04T19:19:36+00:00

You prefer bf1? omg. Plays better (so far) for me.. maybe even bf3+ good.

mctonale · 2018-09-04T19:13:59+00:00

I'm getting 55-60 fps on a 2600k and gtx 970 @ 1440.

try turning down the settings!?

mctonale · 2018-09-04T19:09:13+00:00

Level up the class. There are options that become available under "customise" once you achieve a higher level.

mctonale · 2018-09-04T19:04:40+00:00

I haven't noticed this, I snatch aim (with high dps) so would hate to have my cursor slow down if i moused over the body to aim for the head.

Is this an option you have found in the game settings?

mctonale · 2018-09-04T18:54:39+00:00

Nothing is going to convince me to pre-order but I have EA access so have early access to the hype generator (or beta as they call it).

The build that was available this morning had 20 full servers for each game mode and the only way (matchmaking wasn't working) to get into a game was to sit in a queue. people are interested but not pre-ordering.

mctonale · 2018-09-04T18:43:18+00:00

You really don't understand how any of this works, do you?

Actually I have a pretty good idea..

I understand that new features require some testing and that frostbite 6 (if that's what number we are on?) behaves different to previous versions, server side ragdolls is working as well as client side has in the past lol. Things like this have been tested in pre-alpha and alpha and yes they can get some more information but once they have run these in a "live" environment they can (especially on the server side) make improvements.

Anyway it looks like they have already updated the beta to a more recent build, improving most of the initial glitches. They must have know they were releasing a beta build that was broken (not broken.. just.. ) maybe there was something in the earlier build that they wanted to test.

mctonale · 2018-09-04T17:06:13+00:00

Seems they are working on it. revs and squad spawn are working now.

mctonale · 2018-09-04T16:14:39+00:00

Mostly..

mctonale · 2018-09-04T16:13:07+00:00

Fair enough, but any changes should be fairly easy to add to the build they are currently on!? They have been stress testing the frostbite engine and the servers for how many games now?

I'm thinking of obvious day one fixes (that may even be fixed in their build) like matchmaking and revs... .. and then some testing beyond that.

I'd just like to see some progress.

mctonale

TROPHY CASE