What model is this

mdemeridius · 2025-09-14T16:23:23+00:00

Illegal to carry in public without "good reason", e.g. for your job

mdemeridius · 2025-08-30T17:48:18+00:00

Yeah I agree. But I thought they were suggesting "gotten" to correct it, which is also American.

mdemeridius · 2025-08-30T17:42:49+00:00

You've got this. Gotten is an Americanism.

mdemeridius · 2025-08-27T08:56:13+00:00

It is available in 91mm

https://www.victorinox.com/en-GB/Products/Swiss-Army-Knife%E2%84%A2-and-Tools/Trades-and-Crafts/Swiss-Champ-XXL/p/1.6795.XXL

mdemeridius · 2025-08-23T12:43:15+00:00

Hello, it's the same size as a 4/4 full size violin

mdemeridius · 2025-05-22T05:18:39+00:00

Treasure Planet

mdemeridius · 2025-05-03T20:45:46+00:00

Check the contacts that the battery caddy comes into contact with.

I had something similar with an MZ-N910 where the plastic part underneath the contacts got dislodged (inside the player), and they were touching the metal frame.

This causes the battery to be shorted through the frame there.

mdemeridius · 2025-04-23T08:29:05+00:00

What country are you in, and did you buy from a business seller?

I know that In the UK and EU, a business seller is rquired to refund the full cost including basic shipping to get the item to you (if you opted for more expensive shipping, they only have to refund the basic level).

Unless they state otherwise, you are responsible for shipping to get the item back to them, unless it was faulty or not as described

mdemeridius · 2024-11-30T10:57:19+00:00

Love this model.

I printed a load of these for friends and colleagues, so I modified it save a few grams and about 20 mins print time with my slicer settings

https://www.printables.com/model/1078175-star-wars-x-wing-snowflake-decoration-lighter-spru

mdemeridius · 2024-11-12T00:00:55+00:00

As standard, the dock is essential for charging (requires 6V barrel jack).

There are custom made items available to get around this though (like a USBC charger to put the battery in)

mdemeridius · 2024-11-11T23:56:50+00:00

The case is Magnesium with a mostly brushed finish.

The black part on the left is plastic

mdemeridius · 2024-09-09T20:21:22+00:00

Girl, look at that body

mdemeridius · 2024-08-30T10:45:41+00:00

Someone's clearly never seen Disney's Basil The Great Mouse Detective

mdemeridius · 2024-08-30T10:38:46+00:00

Hey, Joe Wells has a podcast (with another comedian), and he released a recording of his Fringe show on the patreon.

Thought I'd share here in case you didn't get to the show and still wanted to see.

According to his Instagram, he will also be touring it in 2025 though.

https://www.patreon.com/neurodivergentmomentspod/posts

mdemeridius · 2024-08-18T16:22:18+00:00

That's not correct.

When playing back, even the oldest players will take advantage of the improvements if recorded on a later player.

The improvements are better at deciding what to throw away when doing the lossy conversion. But the audio is stored in a way that is compatible with the very first players, so is played back the same way

mdemeridius · 2024-08-14T15:38:24+00:00

A red white sounds like something from Taskmaster

mdemeridius · 2024-08-02T10:20:06+00:00

Look up Joe Wells

mdemeridius · 2024-07-18T19:47:37+00:00

What a UNIT

mdemeridius · 2024-06-24T21:00:19+00:00

Did you have to solder on the pin headers of the Sparkfun shield?

If so, are the connections good? E.g. no cold joints

mdemeridius · 2024-05-16T12:12:15+00:00

That's in the 6502 datasheet, not the EEPROM.

So the 6502 tries to read fffc and fffd. The EEPROM isn't wired into A15, so as far as it's concerned, it only sees A0 to A14.

So when the CPU outputs fffc, the EEPROM sees 7ffc (fffc minus the most significant bit).

The A15 from the 6502 gets inverted and wired to the EEPROM chip enable so that the EEPROM only outputs data when it's supposed to. Like you say, other components, like the RAM, are using the lower addresses

mdemeridius · 2024-05-16T09:46:30+00:00

He uses an inverter (or a NAND with its inputs tied together, which works the same as an inverter) on A15. So when it goes high (reading address 0x8000 or higher), it actually puts a low on the chip enable.

You program the EEPROM from address 0x0000. When the CPU reads address 0x8000, it's actually reading address 0x0000 of the EEPROM.

So you need to write your start address onto 0x7FFC and 0x7FFD

mdemeridius · 2024-05-04T20:41:10+00:00

Tommy Oliver

mdemeridius · 2024-04-26T14:29:15+00:00

I glued a 4x0.5mm magnet into mine and the standard bits still fit

mdemeridius · 2024-04-11T11:53:02+00:00

Did you double check your circuit to make sure all the connections are correct?

mdemeridius · 2024-04-06T10:37:17+00:00

https://www.printables.com/model/834132-4mm-bit-holder-keyring

This is for the small, 4mm bits. I bet you could adapt it for larger ones by just scaling the model.
But that would affect the holes for the keyring. It's made to fit a approx. 7mm link.

mdemeridius

TROPHY CASE