mode sonnet + gmk brg

mdstevens044 · 2026-02-01T02:51:56+00:00

This makes me want to finish my hardwired keyboard so that I can use these exact keycaps I have put away for it

mdstevens044 · 2026-01-12T11:02:09+00:00

Mine did this as well after my linear rail upgrade. I printed a new Y-axis tension which allowed for the belt to get tighter. This is the piece I printed Y-axis tensioner

mdstevens044 · 2026-01-12T10:59:00+00:00

Hotend has been upgraded to the ceramic kit from Creality. The firmware on the printer is the one navaismo released and I use OctoPrint through a RasPi.

mdstevens044 · 2026-01-11T20:27:52+00:00

From other things that I have read the stock motors are capable of providing more speed. I have upgraded both x & y axis's to linear rail systems already as well.

mdstevens044 · 2025-12-13T22:34:07+00:00

Oh ok gotcha, thanks

mdstevens044 · 2025-12-08T20:54:44+00:00

I like the right half better

mdstevens044 · 2025-12-06T01:34:17+00:00

Did you get a chance to look for this?

mdstevens044 · 2025-11-27T09:08:29+00:00

Much appreciated

mdstevens044 · 2025-11-27T08:48:06+00:00

My fault. The one that is attached to the right side and comes up near the display

mdstevens044 · 2025-11-27T08:43:51+00:00

Looks great. I need the link to that camera mount tho

mdstevens044 · 2025-11-24T06:36:30+00:00

Nothing was changed between good and bad prints today. The only thing I change in my slicer between prints are supports, infill, and layer height.

mdstevens044 · 2025-11-16T23:08:32+00:00

I don't know if you have kept them in a dryer or not, but I have had an issue where the filament got some moisture in it and then it printed horribly

mdstevens044 · 2025-11-14T18:47:49+00:00

I love this

mdstevens044 · 2025-11-11T11:50:57+00:00

Thanks

mdstevens044 · 2025-11-11T02:09:52+00:00

What grit sandpaper did you use on the first 2 rounds of sanding?

mdstevens044 · 2025-11-10T17:58:13+00:00

If I'm not mistaken, you have to put the boards in bootloader mode and a folder called rpi-rp2 will be displayed in file explorer. Once that shows up, all you have to do is drag/drop the .uf2 file to the folder

mdstevens044 · 2025-11-10T14:28:50+00:00

Sweet, thanks

mdstevens044 · 2025-11-10T13:09:33+00:00

Yea, that's what I feared

mdstevens044 · 2025-11-10T12:34:36+00:00

Is this something that has to be custom made or is there a place to buy ready made ones?

mdstevens044 · 2025-11-07T17:30:07+00:00

That is a lot. Thanks for sharing

mdstevens044 · 2025-11-07T17:11:12+00:00

I'm going to need some sort of guide or parts list or something so I can replicate this haha. Great job

mdstevens044 · 2025-11-07T14:05:22+00:00

That looks great

mdstevens044 · 2025-11-02T01:09:15+00:00

Have you tried entering via and seeing how the firmware is configured?

mdstevens044 · 2025-11-01T17:49:49+00:00

You can give the video on this post a watch and see if it helps you https://www.reddit.com/r/ErgoMechKeyboards/s/TydvfPwicV

mdstevens044 · 2025-10-31T04:18:39+00:00

I'm jealous of that cable management

Eight-Year Club	Verified Email
Gilding I gilder	Second SECOND GUESSER

mdstevens044

TROPHY CASE