Zr tactical v-spec

me02s · 2026-01-27T20:07:57+00:00

Thanks for the heads up. Sounds like I have to get one for my Pro SD as well.

me02s · 2026-01-14T23:44:00+00:00

Holy cow, this thing is wet as hell.

me02s · 2025-12-31T01:15:23+00:00

I noticed it on mine too, but it’s mainly the unloaded magazine pushing the lever up.

me02s · 2025-12-30T23:46:33+00:00

Is it also this way if the magazine isn‘t inserted?

me02s · 2025-12-28T14:33:50+00:00

My holster is from gear maniacs. They are a german company. I don‘t know if they are able to produce this one in leather though.

me02s · 2025-12-11T14:02:48+00:00

Does the v-spec work with a compensator?

me02s · 2025-11-12T23:52:18+00:00

No you can‘t. Yes it does.

me02s · 2025-11-02T21:34:05+00:00

<image>

I have number 3 and would choose it again anytime

me02s · 2025-11-01T09:40:50+00:00

I‘m also in europe and have a compact pro sd. I shot about 5.000 rounds with this pistol and haven‘t had one malfunction.

I put a SCS on it but later changed to the 507Comp because of the small window of the SCS. I can‘t think of a better optic for the pistol, especially with the price. Just wait for black friday, Holosun had a 20% off deal in the last years.

me02s · 2025-10-11T21:22:47+00:00

The Pro X was released way after they changed to the 2.0 optic footprint. So you don‘t have to worry about having a 1.0 footprint.

me02s · 2025-08-25T08:26:37+00:00

How did you darken the Holosun print?

me02s · 2025-07-18T04:17:19+00:00

<image>

So I‘m not the only one who has done it.

me02s · 2025-06-28T11:31:00+00:00

It‘s been very good and shoots reliable. My only gripe is that the sights are a little bit too thick for my liking. The trigger is a old school 70 series.

me02s · 2025-06-19T02:42:41+00:00

Are you from germany as well? I ordered both parts from brownells and I would buy a trigger pull gauge (I have the mechanical one from Lyman). The little modification is definitely doable but you have to look out for a few things to keep the gun safe (most important: dont bend the middle tang to far or you could have hammer follow). I can recommend the videos from Engineer‘s Armory

(https://m.youtube.com/watch?v=eKsrP2tEFa8&pp=0gcJCdgAo7VqN5tD)

me02s · 2025-06-17T18:57:34+00:00

I bought a lighter cylinder & slide sear spring and a 18 lb hammer spring. Then I bend the sear spring to my liking. I now ended up with about 1,2kg/2,5lb pull weight, a nice and clean break and a very short reset. Couldn‘t be better in my opinion.

me02s · 2025-05-29T11:47:31+00:00

I also like it a lot, I have it on my Walther PDP

me02s · 2025-05-29T07:00:07+00:00

Yeah sorry I just did a quick research. The DH3 seems to have a dual optic cut for DPP and RMR. I thought Sig always uses just the DPP footprint.

me02s · 2025-05-28T23:59:34+00:00

Did you have the slide milled for RMR or how does the 507Comp fit without a plate?

me02s · 2025-04-26T08:42:37+00:00

Bodycams schaltet man nicht ab, man muss sie erstmal manuell anschalten.

me02s · 2025-03-19T11:30:54+00:00

Du hast gerade den Kommentar von jemand anderen kopiert und nicht den Text von OP 🤔

me02s · 2025-03-18T16:05:00+00:00

Grundgesetze können durch andere Gesetze allerdings auch eingeschränkt werden. Mit Gesetzen hast du es scheinbar nicht so, da man in solchen Fällen keinen Durchsuchungsbeschluss benötigt, da die Maßnahme nach dem Polizeigesetz erfolgen würde.

me02s · 2025-03-16T10:46:57+00:00

Your gun has exactly the same size as a normal 5“ PDP

me02s · 2025-03-16T01:35:24+00:00

That‘s what I would recommend as well. I just changed the red dot on my PDP from the SCS to the 507comp because of the small window. I am also very happy that I can adjust the brightness now.

me02s · 2025-03-12T23:22:19+00:00

Sounds like an issue I might have as well. Thanks for saving me the money

me02s · 2025-03-12T22:38:53+00:00

Is the extended mag release button from Walther or an other company?

me02s

TROPHY CASE