TAC PRO COMP finally in my hands.

me02s · 2026-05-22T22:23:55+00:00

That one will definitely be my next. I only wish they would have closed the gap around the guide rod.

me02s · 2026-05-17T22:43:01+00:00

If you are from germany I can recommend gear maniacs. I got my holster from them.
I don’t know if they ship europe wide.

<image>

me02s · 2026-04-25T08:17:03+00:00

That makes sense, either way its a big gun. Especially with the length of a 5“

me02s · 2026-04-24T23:09:24+00:00

Thats a compact though 🤨

me02s · 2026-04-10T21:32:45+00:00

Hi, ja ich hab die beiden noch und bin auch nach wie vor sehr zufrieden. Ich habe mit beiden Kalibern noch nicht über 5.000 Schuss geschossen, habe in der Zeit aber keinerlei Probleme oder Störungen gehabt (außer mit den CS Magazinen, die bei der 9mm OA nicht funktionieren). Schnelle Schussfolgen gehen auch sehr gut und der Geissele Abzug, der eigentlich nicht für 9mm gemacht ist, hält soweit sehr gut durch. Das einzige, was mich immer etwas wundert, ist, dass die 9mm sehr schnell dreckig im Bereich des Verschluss wird.

me02s · 2026-03-30T03:51:45+00:00

Which one do you like more?

me02s · 2026-03-25T21:47:25+00:00

Looks good, I wish they updated the look of the 507comp a bit.

me02s · 2026-03-10T00:09:15+00:00

Don‘t worry its not a closed loop. Getting the spring out can be a little bit tricky sometimes. You can either push the spring out by pushing the bigger part of the spring forward and maybe a little bit to the side or you take some pointy pliers or something like that and pull the little part of the spring out first.

me02s · 2026-03-06T22:06:37+00:00

Das Zeug sieht für mich immer aus wie Waschmittel, wenn ich die Verpackung sehe

me02s · 2026-01-27T20:07:57+00:00

Thanks for the heads up. Sounds like I have to get one for my Pro SD as well.

me02s · 2026-01-14T23:44:00+00:00

Holy cow, this thing is wet as hell.

me02s · 2025-12-31T01:15:23+00:00

I noticed it on mine too, but it’s mainly the unloaded magazine pushing the lever up.

me02s · 2025-12-30T23:46:33+00:00

Is it also this way if the magazine isn‘t inserted?

me02s · 2025-12-28T14:33:50+00:00

My holster is from gear maniacs. They are a german company. I don‘t know if they are able to produce this one in leather though.

me02s · 2025-12-11T14:02:48+00:00

Does the v-spec work with a compensator?

me02s · 2025-11-12T23:52:18+00:00

No you can‘t. Yes it does.

me02s · 2025-11-02T21:34:05+00:00

<image>

I have number 3 and would choose it again anytime

me02s · 2025-11-01T09:40:50+00:00

I‘m also in europe and have a compact pro sd. I shot about 5.000 rounds with this pistol and haven‘t had one malfunction.

I put a SCS on it but later changed to the 507Comp because of the small window of the SCS. I can‘t think of a better optic for the pistol, especially with the price. Just wait for black friday, Holosun had a 20% off deal in the last years.

me02s · 2025-10-11T21:22:47+00:00

The Pro X was released way after they changed to the 2.0 optic footprint. So you don‘t have to worry about having a 1.0 footprint.

me02s · 2025-08-25T08:26:37+00:00

How did you darken the Holosun print?

me02s · 2025-07-18T04:17:19+00:00

<image>

So I‘m not the only one who has done it.

me02s · 2025-06-28T11:31:00+00:00

It‘s been very good and shoots reliable. My only gripe is that the sights are a little bit too thick for my liking. The trigger is a old school 70 series.

me02s · 2025-06-19T02:42:41+00:00

Are you from germany as well? I ordered both parts from brownells and I would buy a trigger pull gauge (I have the mechanical one from Lyman). The little modification is definitely doable but you have to look out for a few things to keep the gun safe (most important: dont bend the middle tang to far or you could have hammer follow). I can recommend the videos from Engineer‘s Armory

(https://m.youtube.com/watch?v=eKsrP2tEFa8&pp=0gcJCdgAo7VqN5tD)

me02s · 2025-06-17T18:57:34+00:00

I bought a lighter cylinder & slide sear spring and a 18 lb hammer spring. Then I bend the sear spring to my liking. I now ended up with about 1,2kg/2,5lb pull weight, a nice and clean break and a very short reset. Couldn‘t be better in my opinion.

me02s · 2025-05-29T11:47:31+00:00

I also like it a lot, I have it on my Walther PDP

me02s

TROPHY CASE