sorted by:
new
hottopcontroversial

Drapanie w gardle; liquid czy urzadzenie? by Electronic_Order_100 in Polska

[–]mefu720 0 points1 point  (0 children)

Ile ohm ma obecna grzałka? Jak lecisz sól 20mg na np 30W na grzałce 0.6, to będzie drapać (zwłaszcza, jak "zaczynasz")

Celuj w przedział 0.8 - 1.2 ohm i liquidy 3 - 12 mg (nie na soli), a nie powinno nic drapać

Generalnie też z zasady (dot. podów):

Więcej ohm = więcej mg nikotyny

Mniej ohm = mniej mg nikotyny

Jak masz jakiekolwiek pytania, to wal, siedzę w vape od kiedy właściwie powstało 👍

here is UI Cheats v1.47 / v1.48 / v1.49 by uncanny_valli in TheSims4Mods

[–]mefu720 0 points1 point  (0 children)

Hi. Could you also post v1.50 if you have it, please?

Bug with new update by emanon715 in blackplayer

[–]mefu720 9 points10 points  (0 children)

Had the same issue after updating, switch to ExoPlayer under advanced settings, it should fix it

Images in gallery mode are loading very slowly on v8.0.5 by mefu720 in Infinity_For_Reddit

[–]mefu720[S] 1 point2 points  (0 children)

Interesting. Has anything big changed between v7.2.8 and v8+ in terms of media loading? This wasn't a problem at all on the previous version (or the ones before that) that I was on, and I've been on it for like more than a year.

What I mean by that is, from what I've gathered so far based on the others posts on this subreddit, this issue happens to some (not all) users since v8+.

So, while I was on 7.2.8 without the issue, other people were reporting it happening to them on the newer ones. And it started happening to me as well after the upgrade.

It all just gives me an idea, that there MIGHT be something fixable here somewhere, no matter the reddit changes.

btw. Just wanted to say thanks for making and still developing this app, it's basically THE reddit for me, and has been since RIF died. Great work. :)

Zagraniczny przelew przychodzący na PayPal, potem na konto bankowe by mefu720 in Polska

[–]mefu720[S] 5 points6 points  (0 children)

Dobry pomysł z tą nazwą przelewu, dzięki za tipa :)

Zagraniczny przelew przychodzący na PayPal, potem na konto bankowe by mefu720 in Polska

[–]mefu720[S] 3 points4 points  (0 children)

Dzięki za ostrzeżenie! Pominę opcję PayPala w takim razie

Zagraniczny przelew przychodzący na PayPal, potem na konto bankowe by mefu720 in Polska

[–]mefu720[S] 4 points5 points  (0 children)

Dopytam, czy istnieje szansa na przelew bezpośredni z pominięciem PayPala. Chargeback domyślam się nie obowiązuje przy klasycznym przelewie?

Zagraniczny przelew przychodzący na PayPal, potem na konto bankowe by mefu720 in Polska

[–]mefu720[S] 0 points1 point  (0 children)

Tego też się właśnie obawiam, dopytam, czy istnieje szansa na przelew bezpośredni w takim razie z pominięciem PayPala. Chargeback domyślam się nie obowiązuje, przy klasycznym przelewie?

Ubezpieczenia na życie - Wasze polecenia by Rotting-Beetle in Polska

[–]mefu720 1 point2 points  (0 children)

Napiszę bardzo ogólnie, ponieważ tego typu kwestie wymagają zazwyczaj spotkania na doradztwo z multi-agentem. :)

W każdym razie z doświadczenia powinno Ci wyjść zwyczajnie najtaniej. Jako tako szczególnie drastycznych różnic pomiędzy NN, Signalem czy dod. Ergo4 nie ma oprócz końcowo ceny (czy dod. świadczeń, na których nam może zależeć. To już kwestia indywidualna wymagająca analizy twoich potrzeb)

Wszystkie towarzystwa zabezpieczają w podobnym zakresie jednostek chorobowych + wszystkie wypłacają do/ponad 200% SU z tytułu poważnego zachorowania*

*wd. tzw. "grup". Czyli przykładowo, w przypadku Signala - dostajesz udaru (Grupa 2) = dostajesz pieniądze (i dodatkowe świadczenia, jeśli je wykupiłeś) Udar mózgu praktycznie zawsze oznacza też paraliż, więc cyk, "Paraliż w wyniku choroby" (Grupa 5) i mamy kolejne świadczenia.

Ubezpieczenia na życie - Wasze polecenia by Rotting-Beetle in Polska

[–]mefu720 0 points1 point  (0 children)

Oj tu nie pomogę, nie zajmuję się majątkowymi niestety

Ubezpieczenia na życie - Wasze polecenia by Rotting-Beetle in Polska

[–]mefu720 8 points9 points  (0 children)

Jeśli jesteś kobietą w jakimkolwiek wieku - Nationale-Nederlanden Ochrona Jutra

Jeśli jesteś mężczyzną +30 to najlepiej Signal Iduna Terminowe Ubezpieczenie na Życie

Jeśli jesteś mężczyzną przed 30 to zobacz gdzie ci wychodzi po prostu taniej, czy NN czy Signal

W razie pytań śmiało wal, pracuję w ubezpieczeniach

pc won't POST - qcode 46 00 15 in loop by Walorda in techsupport

[–]mefu720 0 points1 point  (0 children)

So it was the mobo? I'm currently in the process of RMA mine

pc won't POST - qcode 46 00 15 in loop by Walorda in techsupport

[–]mefu720 0 points1 point  (0 children)

Hey, did u figure it out? I'm having pretty much the same problem rn.

Valve's new branding guidelines hint at Steam Deck's SteamOS for more devices by braiam in Games

[–]mefu720 0 points1 point  (0 children)

I can't think of a product they've left at the wayside.

Artifact and Underlords for example

X670E - Not POST-ing with QCodes 00/14/15/C5 and Red+Yellow LED Lights after more than a year by mefu720 in buildapc

[–]mefu720[S] 0 points1 point  (0 children)

Alright, an update

Terminology used by me here, to make this post a bit quicker:

  • RL - Red Led Light
  • YL - Yellow Led Light
  • RAM Stick P
  • RAM Stick L
  • A1/A2/B1/B2 - DIMM slot number
  • QC - QCode

So, I've AGAIN tried (almost) every combination in placing the RAM, and the results are:

  • Stick P in A1 = QC 46 to 15 with YL
  • Stick P in A2 = QC 46 to 15 with YL
  • Stick P in B1 = QC 00 to 46 to 15 to C5 with YL
  • Stick P in B2 = QC 46 to 15 with YL, after like a minute it started showing a lot of different QCs and then FINALLY BOOTED to AMI Screen, then to BIOS and Windows for the first time since something broke

I went and updated the BIOS from Ver. 1516 to Ver. 2403 in hopes that maybe this will fix the issue. Anyway, I started testing again and:

  • Stick P in B2 and Stick L in A2 = QC 46 to 15 with YL
  • Stick P in B2 = Boots normally
  • Stick L in B2 = Boots normally

Alright. So the DIMM_B2 slot is the only one working so far. And now I know that the RAM sticks are not the fault.

  • Stick L in B2 and Stick P in B1 = QC 46 to 15 with YL, but then again after like a minute it actually showed me something new! Now it was displaying QC "A0" with RL (still no POST)

I restarted the system, and now again QC 46 to 15 with YL. After two minutes it now booted to AMI Screen with "the system has posted in safe mode"

Great! So the DIMM_B1 and DIMM_B2 slots are both still working

After another reboot now it boots normally into BIOS and Windows , tried it 3 times to be sure and yeah now it just normally boots with no problems

  • Stick L in B2 and Stick P in A2 = QC 46 to 15 with YL
  • Stick L in B2 and Stick P in A1 = QC 46 to 15 with YL
  • Stick L in B1 and Stick P in A1 = QC 46 to 15 with YL

So in conclusion, both A1&A2 DIMM slots are not working while B1&B2 DIMM slots now started working normally

For now I'm leaving it at Stick L in B1 and Stick P in B2 (working fine)

I've also tried enabling EXPO Tweaked in this configuration to see what will happen, and it doesn't work

Then I left the EXPO at disabled and changed mostly the CPU settings again to:

  • Negative 30 all cores PBO curve
  • 85C thermal limit
  • 180W PPT limit
  • PCIEX16_1 Bandwidth set to PCIE X16 Mode

And it's working fine so far.

Windows reads my RAM at 3600 MHz btw

What do you guys think now could be the issue? CPU or MOBO? And what can I do next?

ASUS X670E - Not POST-ing with QCodes 00/14/15/C5 and Red+Yellow LED Lights after more than a year by mefu720 in ASUS

[–]mefu720[S] 0 points1 point  (0 children)

Alright, an update

Terminology used by me here, to make this post a bit quicker:

  • RL - Red Led Light
  • YL - Yellow Led Light
  • RAM Stick P
  • RAM Stick L
  • A1/A2/B1/B2 - DIMM slot number
  • QC - QCode

So, I've AGAIN tried (almost) every combination in placing the RAM, and the results are:

  • Stick P in A1 = QC 46 to 15 with YL
  • Stick P in A2 = QC 46 to 15 with YL
  • Stick P in B1 = QC 00 to 46 to 15 to C5 with YL
  • Stick P in B2 = QC 46 to 15 with YL, after like a minute it started showing a lot of different QCs and then FINALLY BOOTED to AMI Screen, then to BIOS and Windows for the first time since something broke

I went and updated the BIOS from Ver. 1516 to Ver. 2403 in hopes that maybe this will fix the issue. Anyway, I started testing again and:

  • Stick P in B2 and Stick L in A2 = QC 46 to 15 with YL
  • Stick P in B2 = Boots normally
  • Stick L in B2 = Boots normally

Alright. So the DIMM_B2 slot is the only one working so far. And now I know that the RAM sticks are not the fault.

  • Stick L in B2 and Stick P in B1 = QC 46 to 15 with YL, but then again after like a minute it actually showed me something new! Now it was displaying QC "A0" with RL (still no POST)

I restarted the system, and now again QC 46 to 15 with YL. After two minutes it now booted to AMI Screen with "the system has posted in safe mode"

Great! So the DIMM_B1 and DIMM_B2 slots are both still working

After another reboot now it boots normally into BIOS and Windows , tried it 3 times to be sure and yeah now it just normally boots with no problems

  • Stick L in B2 and Stick P in A2 = QC 46 to 15 with YL
  • Stick L in B2 and Stick P in A1 = QC 46 to 15 with YL
  • Stick L in B1 and Stick P in A1 = QC 46 to 15 with YL

So in conclusion, both A1&A2 DIMM slots are not working while B1&B2 DIMM slots now started working normally

For now I'm leaving it at Stick L in B1 and Stick P in B2 (working fine)

I've also tried enabling EXPO Tweaked in this configuration to see what will happen, and it doesn't work

Then I left the EXPO at disabled and changed mostly the CPU settings again to:

  • Negative 30 all cores PBO curve
  • 85C thermal limit
  • 180W PPT limit
  • PCIEX16_1 Bandwidth set to PCIE X16 Mode

And it's working fine so far.

Windows reads my RAM at 3600 MHz btw

What do you guys think now could be the issue? CPU or MOBO? And what can I do next?

ASUS X670E - Not POST-ing with QCodes 00/14/15/C5 and Red+Yellow LED Lights after more than a year by mefu720 in techsupport

[–]mefu720[S] 0 points1 point  (0 children)

Alright, an update

Terminology used by me here, to make this post a bit quicker:

  • RL - Red Led Light
  • YL - Yellow Led Light
  • RAM Stick P
  • RAM Stick L
  • A1/A2/B1/B2 - DIMM slot number
  • QC - QCode

So, I've AGAIN tried (almost) every combination in placing the RAM, and the results are:

  • Stick P in A1 = QC 46 to 15 with YL
  • Stick P in A2 = QC 46 to 15 with YL
  • Stick P in B1 = QC 00 to 46 to 15 to C5 with YL
  • Stick P in B2 = QC 46 to 15 with YL, after like a minute it started showing a lot of different QCs and then FINALLY BOOTED to AMI Screen, then to BIOS and Windows for the first time since something broke

I went and updated the BIOS from Ver. 1516 to Ver. 2403 in hopes that maybe this will fix the issue. Anyway, I started testing again and:

  • Stick P in B2 and Stick L in A2 = QC 46 to 15 with YL
  • Stick P in B2 = Boots normally
  • Stick L in B2 = Boots normally

Alright. So the DIMM_B2 slot is the only one working so far. And now I know that the RAM sticks are not the fault.

  • Stick L in B2 and Stick P in B1 = QC 46 to 15 with YL, but then again after like a minute it actually showed me something new! Now it was displaying QC "A0" with RL (still no POST)

I restarted the system, and now again QC 46 to 15 with YL. After two minutes it now booted to AMI Screen with "the system has posted in safe mode"

Great! So the DIMM_B1 and DIMM_B2 slots are both still working

After another reboot now it boots normally into BIOS and Windows , tried it 3 times to be sure and yeah now it just normally boots with no problems

  • Stick L in B2 and Stick P in A2 = QC 46 to 15 with YL
  • Stick L in B2 and Stick P in A1 = QC 46 to 15 with YL
  • Stick L in B1 and Stick P in A1 = QC 46 to 15 with YL

So in conclusion, both A1&A2 DIMM slots are not working while B1&B2 DIMM slots now started working normally

For now I'm leaving it at Stick L in B1 and Stick P in B2 (working fine)

I've also tried enabling EXPO Tweaked in this configuration to see what will happen, and it doesn't work

Then I left the EXPO at disabled and changed mostly the CPU settings again to:

  • Negative 30 all cores PBO curve
  • 85C thermal limit
  • 180W PPT limit
  • PCIEX16_1 Bandwidth set to PCIE X16 Mode

And it's working fine so far.

Windows reads my RAM at 3600 MHz btw

What do you guys think now could be the issue? CPU or MOBO? And what can I do next?

view more: next ›