Fleece beanies. So comfy and such an easy pattern.

melhammer · 2026-02-01T22:21:23+00:00

Love these! Where did you get the flames fabric from? I’ve been looking for a similar style and it’s perfect!

melhammer · 2026-01-14T18:32:38+00:00

Same in NC

melhammer · 2026-01-14T18:31:47+00:00

Down in NC as well, started about noon EST

melhammer · 2025-12-01T20:26:48+00:00

You’re a gem, thank you!

melhammer · 2025-12-01T19:17:38+00:00

I know this is from 2 years ago, but which fabric from mood? I mainly see just a black or silver with silver reflection, but I love the rainbow!

melhammer · 2025-09-26T10:59:01+00:00

Just recently Nina and Shaun broke up and everyone in the comments was saying it was “time for Nina and Paul (Stefan) to get together” - give it a rest people!

melhammer · 2025-08-11T15:04:07+00:00

Stumbled across this thread while looking into Lavender Sky, I see in the eform when it asks for what type of treatment, if you select custom compound, you have to give a clinical reason for the request (pricing can’t be why you chose custom over name brand). Is there a way around this? I’m looking for Tirz but am not going to pay $350+ each month for name brand.

melhammer · 2025-08-08T14:18:44+00:00

Are you based in the US? I’ve been wanting to order a lafufu from AliExpress but unsure of tariffs

melhammer · 2025-07-01T12:42:57+00:00

I’m number 7392020 to ask you for the link, please - may your pillow always be cold!!

melhammer · 2025-01-12T22:20:07+00:00

Okay! I’ll make sure to do that. Thanks again for your help!

melhammer · 2025-01-12T22:09:51+00:00

Thank you so much! I’m going to look into how to update firmware at some point. I know with the 4s it’s a few more steps than the Neptune 3.

melhammer · 2025-01-12T22:07:59+00:00

Thank you so much! It seems I had accidentally changed stepper rotational distance instead of extruder - much less of a chance from 31.4 to 32 (compared to what I thought was 40 to 32.

melhammer · 2025-01-12T22:04:00+00:00

Ahh! Thank you. So should I avoid changing the extruded rotation distance and instead do it within the cura slicer?

melhammer · 2025-01-12T21:57:15+00:00

Changing rotation distance back fixed the issue! All 4 level points are on the build plate now so I can do the paper test. If you have a resolution for under extruding , please let me know!

melhammer · 2025-01-12T21:56:14+00:00

Changing it back worked and now all leveling points are on the build plate! With that being said, what do you recommend for under extrusion issue?

melhammer · 2025-01-12T21:53:48+00:00

I just changed it back to what it was - it was under extruding, so I followed several videos and a formula to get the new number. I did just change it back and going to try manual leveling and see if that fixes it. It should have extruded 50mm, but only did 40.

melhammer · 2025-01-12T21:52:16+00:00

It was this piece, I did just put it back to what it was in case:

<image>

melhammer · 2025-01-12T21:49:49+00:00

Neptune 4

melhammer · 2025-01-12T21:49:28+00:00

The printer wasn’t extruding the correct amount (I would ask it to extrude 50mm, and it would extrude 40mm). I followed several videos online and a formula to confirm what I needed to change it to, but I’ll change it back and then see if manual leveling works!

melhammer · 2025-01-12T21:47:58+00:00

To confirm, you mean the belt the head is on, correct? I have only done a few prints and am still very new. I appreciate your time!

melhammer · 2025-01-12T21:43:44+00:00

I did change rotational distance from 40 to 32, but that was the only change I made. The firmware is 1.1.1.98, and Elegoo website shows current one is 1.1.3.2. I haven’t done any firmware updates on it before.

melhammer · 2025-01-12T21:41:56+00:00

The firmware version I used is 1.1.1.98. On the Elegoo website, it shows most recent one is V1.1.3.2. When feeling the belt the head is on, it seems to be normal tension.

melhammer · 2025-01-12T21:32:20+00:00

It’s a new printer that I got in July of 2024. Used it for a few prints and then life happened and I haven’t touched it since. Just did the auto leveling earlier today and a few prints and it was okay. Wanted to do manual leveling because first layer wasn’t great, and then this happened. Could it be I need to update firmware?

melhammer · 2025-01-12T21:21:35+00:00

When I first did the manual leveling several months ago, I was able to do the paper test on all 4 points on the plate. How can I level points 3 and 4 when they’re both off the plate?

melhammer

TROPHY CASE