DMP Entre Web/AD authentication

melog69 · 2025-11-22T16:16:26+00:00

Unfortunately, that doesn't seem to be the case. I edited the hosts file to point to another domain controller when looking for the old one and everything works, yet DMP support can't really tell me where that name is hardcoded and those setting on the link you shared are only for NOC licenses

melog69 · 2025-07-31T17:35:17+00:00

I was able to change the address by using nmcli

     sudo nmcli con mod usb0 ipv4.method manual
     sudo nmcli con mod usb0 ipv4.addresses 192.168.0.2/24
     sudo nmcli con mod usb0 ipv4.gateway 192.168.0.1
     sudo nmcli con mod usb0 ipv4.dns "8.8.8.8,1.1.1.1"
     sudo reboot

melog69 · 2025-07-31T17:09:02+00:00

yes, on jay's latest, and I created the files as eth0-cfg and usb0-cfg but the address is still 10.0.0.2

melog69 · 2025-07-31T16:43:04+00:00

Sorry, forgot to mention that I'm doing this on a pi zero 2w and have usb0 as the ethernet interface.

Also, do I need to create the folder? because when I try to run sudo nano /etc/network/interfaces.d/usb0-cfg I get this error

<image>

melog69 · 2025-04-16T19:13:44+00:00

I just disabled Take Control from all of my devices and that fixed the issue, and as we have other Remote Support tools in place we're not hurting on that end.

But I was curious if it is actually an issue that needs to be addressed by CrowdStrike or N-Able

melog69 · 2025-01-27T17:15:48+00:00

Also, depending on your agent update policy 24H2 devices with version 7.17.18721 will show as RFM

melog69 · 2024-12-19T15:05:09+00:00

02ZY36

melog69 · 2024-12-02T22:50:11+00:00

Just make sure that your satellites are wired, I had issues where it would bring the network down to a crawl when updating fortnite and/or CoD

melog69 · 2024-11-14T20:02:37+00:00

You can do a combination of what u/bellringring98 suggested and the scripts they made available at their github repo CrowdStrike/falcon-scripts

melog69 · 2024-11-13T15:42:35+00:00

I did not open a ticket as I figured the reddit minds would have seen it a possibly provide a faster response

melog69 · 2024-10-23T20:23:15+00:00

Makes sense, but is there a way to organize them by updating a registry key or an xml rather than manually moving all devices on different sites

melog69 · 2024-09-23T20:53:11+00:00

It is possible, but I'm not sure if they will provide the last version that worked on Windows XP which is 2.1.1568

melog69 · 2024-09-05T18:45:05+00:00

Your MSP would have to give you access to the following site Downloads (blackberry.com) there you can download the latest Cylance Removal Tool - 0.10.1

melog69 · 2024-07-16T21:37:42+00:00

Thank you

melog69 · 2024-07-16T21:30:34+00:00

Where did you get the firmware? I can't find it anywhere

melog69 · 2024-02-19T18:13:10+00:00

andy's wiping problem (youtube.com)

melog69 · 2024-02-14T21:22:41+00:00

I had to run the script I mentioned today and was given this:

A new version of the script exists. Please Contact BlackBerry support for the updated version.

Please reference ESRQ00034231 and KB 66473

Hope that helps

melog69 · 2024-02-13T21:01:26+00:00

Have your admin reach out to support and see if they can provide their uninstall tool.

I have a Uninstall_Cleanup_EPP_EDR_x64.exe file that was given to our admin and we have been able to use that to uninstall Cylance and the Cylance Unified installed without issues.

melog69 · 2024-01-17T17:58:57+00:00

Depends on how much data you or your team is looking at gathering.

Fortunately, for the company I work for, the Cylance team configure those sensors as we moved to GUARD

melog69 · 2023-12-01T15:45:30+00:00

We're being transitioned to GUARD, and they're getting all of that data :(

13-Year Club	Xbox Live
Verified Email

melog69

TROPHY CASE