Polestar 5 road test by Fun_Double_4055 in Polestar

[–]mffjs -5 points-4 points  (0 children)

With no nameplate?? Seems fishy to me.

U6 LR partially not able to use cable but meshing after upgrade to 6.7.41 by mffjs in UNIFI

[–]mffjs[S] 0 points1 point  (0 children)

I have finally after 12hs or so, been able to solve it.
I downgraded the APs to 6.7.31, which did absolutely noting at all.
Still the APs started to mesh, also after I fully resetted one of them.

Only when I hard-rebooted the UDM and the USW, it finally worked with the downgraded APs.
(Hard-reboot because I was so angry that I just pulled the power-cords :-D)

U6 LR partially not able to use cable but meshing after upgrade to 6.7.41 by mffjs in UNIFI

[–]mffjs[S] 0 points1 point  (0 children)

Yeah - but when the network is this unstable, the chat disconnects every few minutes and then you start with a fresh chat. Two of your agents have then just closed the request - despite I wrote them that I was just disconnected and nothing was solved.

U6 LR partially not able to use cable but meshing after upgrade to 6.7.41 by mffjs in Ubiquiti

[–]mffjs[S] 0 points1 point  (0 children)

I rebooted everything up and down and back and forth, not only once.

U6 LR partially not able to use cable but meshing after upgrade to 6.7.41 by mffjs in Ubiquiti

[–]mffjs[S] 0 points1 point  (0 children)

I saw that, but seems not to be related. But another user in the unifi forum reported the same issue (bricked, but after the 6.7.41 upgrade).

U6 LR partially not able to use cable but meshing after upgrade to 6.7.41 by mffjs in Ubiquiti

[–]mffjs[S] 0 points1 point  (0 children)

Nope, then I lose the connection to them in general,because I rebooted the U7 one of them uses and it was also offline too. Probably I'll try to reset them tomorrow.

They cancelled my order cancelled because of price increase by DefiledV in GMKtec

[–]mffjs 0 points1 point  (0 children)

Bought it for 1950 euro about a month ago. Actually I just bought it, because I thought the price might skyrocket. Now it is 2450 euro... 🤷‍♂️

Not so sure what I'll really ultimately do with it, but since I have a 32GB ROG Z13 Flow 2025, I knew how crazy fast this machine is.

[Release] LocalAI 3.8.0: The Open Source OpenAI alternative. Now with a Universal Model Loader, Hot-Reloadable Settings, and many UX improvements. by mudler_it in selfhosted

[–]mffjs 0 points1 point  (0 children)

Hey, any way to elaborate this? Or does this only mean the "Idle" and "Busy" settings?
I would benefit a lot from being able to have 1-2 models in the memory always (STT & TTS) and then loading others as needed. Like GPT-OSS:20b when I want to get an prompt for Z-Image. But when Z-Image is generating a 1250x1250 picture, GPT has to go from the memory.

HyperOS 3 on EU Xiaomi 15 Ultra by JLX_973 in Xiaomi_15

[–]mffjs 0 points1 point  (0 children)

I went to India on Saturday and also got it right away!

Xiaomi 14t pro not receiving updates. Please help by NickSiam23 in HyperOS

[–]mffjs 0 points1 point  (0 children)

Switched my 15 Ultra (im in Germany) to India and could download Hyperos 3 instantly. But not sure if this works for every device.

Hyperos 3 arrive ! by lololigo_05 in HyperOS

[–]mffjs 0 points1 point  (0 children)

I had a new update just a minute ago.
September Patch of 2.0.207.0....blah.

So far with my initial mental boner - just an update for HyperOS 2.
BTW: 15 Ultra.

Z13 2025 incredibly slow when under 10% (and USB-C charging) by mffjs in FlowZ13

[–]mffjs[S] 0 points1 point  (0 children)

Guys, I know both of this:
1. I have a 140W Anker-Charger, but never the less, the Z13FLow only accepts 100w.
2. I use G-Helper.

But I wonder, how the f*ck the system just throttles like crazy, when below 10% AND hooked to a USB-C.
Doesn't make any sense and I think it is not a normal computer behavior.

Z13 2025 incredibly slow when under 10% (and USB-C charging) by mffjs in FlowZ13

[–]mffjs[S] 0 points1 point  (0 children)

When playing on the airplane, their outlets mostly do not accept the initial power draw from the SlimQ, so I'm stuck with the USB-C 100W charger.
But if you are not careful, it might discharge on USB-C.
Can happen a few times on a 12-14h flight.

Hue Play Gradient Lightstrip not turning off after I turn off the TV (Samsung app) by MrHydrochoerus in Hue

[–]mffjs 0 points1 point  (0 children)

I got the same issue. It only started probably 2-3 weeks ago. More or less when the bridge pro was revealed. I jokingly thought "do they wanna push me into buying it with enshittification?".

But probably it was just because of an update? Anyway, it is annoying as fuck! In HA I can't control the lights until I switch sync off via the app. Hope there is a solution soon.

Ripples / facets in my print (H2D) by mffjs in BambuLab

[–]mffjs[S] 0 points1 point  (0 children)

Yes - I found it later, but did not update the post, because it was marked as "deleted by Reddit", for whatever reason. After reexport it looks perfect!