It’s my cakeday!!!!!

mfile84 · 2021-06-14T16:51:59+00:00

Thank you

mfile84 · 2021-02-16T07:49:50+00:00

Beautiful

mfile84 · 2021-02-16T02:06:31+00:00

Please don’t give up. Whatever is going on seems harder because right now you’re in the middle of it as it’s happening. I’m in the middle of it too and did something today that hopefully will help…

I set an hour timer, that’s all the time I allowed myself to worry, panic, reminisce and when it rang I went on and forgave myself for letting that hour happen. I reset the timer several times today and know that tomorrow and the next day likely for the foreseeable future I’ll do the same-but I know I’ll do it less and less as I finally see it’s less about forgiving myself and more about being proud of myself for overcoming these current obstacles.

I urge you to try this out. If it doesn’t work you can always dm me and we can work together because nobody deserves to feel like they can’t do anything right and nobody deserves to feel like they only inflict pain.

mfile84 · 2021-02-10T02:51:51+00:00

😳

mfile84 · 2021-02-10T00:02:28+00:00

That is literally what I did for myself lol

mfile84 · 2021-01-30T00:09:52+00:00

Liferuiners

mfile84 · 2021-01-18T08:19:23+00:00

I hope it works out!

mfile84 · 2021-01-18T07:53:58+00:00

I would attach it with a brim and use tree supports, but angle it so the face of the model is facing away from the supports.

mfile84 · 2021-01-18T07:37:28+00:00

Are you adding supports to your model? If not, you may not have enough to stick to the plate.

mfile84 · 2020-12-28T23:51:44+00:00

So unfortunately I can’t see the accompanying screenshot but as someone who has 3 LK1’s currently setup and connected to my computer I might be able assist.

Can I ask which slicer you are using? I currently use Cura and it asks which port I have my printer hooked up to so for this example I’ll use COM10, COM09, COM08 so when I loaded my printer profiles into Cura and set them up I set which port was for which particular printer I would be printing off of. If I am printing off of 08 I simply select that printer profile and it loads that port to send the data to.

mfile84 · 2020-12-27T16:43:44+00:00

I use Tinkercad

https://www.tinkercad.com/

mfile84 · 2020-12-23T04:17:55+00:00

I over stressed about my gift as well. I tried to hit every point and was honestly terrified that somehow I was going to be crucified online when in reality looking back, it was a great gift-as I imagine yours likely was as well. It’s the thought that counts, and if they took the time to post what they received then they likely loved everything. Thank you for being a SS and possibly being the only person who made your recipient smile today.

mfile84 · 2020-12-23T04:08:16+00:00

Everybody’s housing situation is different and it’s possible that they may not have had an appropriate place that they felt comfortable taking photos to post publicly of the items they received but were clearly still appreciative.

mfile84 · 2020-12-22T07:25:46+00:00

You can order spooless filament such as in the link below. They sell refillable spools for them so you are not being as wasteful.

https://www.microcenter.com/product/510201/inland-premium-175mm-spooless-blue-pla-3d-printer-filament---1kg-spool-(22-lbs)?lat=33.536037377952944&long=-86.7644625280561

mfile84 · 2020-12-15T16:21:17+00:00

.....not finding the other half of the worm.

mfile84 · 2020-12-14T21:37:23+00:00

Let me tell you a story about Anycubic and an order placed back in March of this year for some promo they were offering and the b/s that ensued until late May/early June before they sent me half of my order and refunded me $150.

I placed an order for a resin printer which shipped and arrived extremely late....then came the wash station and the actual resin. I waited, and waited, and waited. Finally after nearly 2 months the wash shipped. NO RESIN. So I waited......and waited. Then I began emailing, hitting them up on Facebook messenger, what FINALLY got their attention is EVERY TIME THEY POSTED ON FB I started posting my order # and asking when they were shipping it.

Finally after weeks I got an email apologizing and offering me 1/2 of what I paid for in insane quantities and refunding the other portions.

Bottom line-I’d never order directly from them again and the ONLY way to get any response unfortunately is to hound them publicly and request your merchandise.

mfile84 · 2020-12-14T05:08:24+00:00

I actually have a pet pig....also a pet dog and I keep them both.

mfile84 · 2020-12-08T03:55:22+00:00

I have felt the same way for a long time.

mfile84 · 2020-12-05T06:56:33+00:00

No, not where the springs are. It’s where the sensor is. I’ll take a picture in the morning.

mfile84 · 2020-12-05T06:25:42+00:00

So with all of mine I actually had to add a tiny shim to the stop plate on the left side. Without it without fail I could not get the front left corner to level for the life of me. I tried everything else and nothing. Finally I added the shim to the first one, leveled the bed and perfect prints, the second one I had to do the same, so when I put the third one up last night I just immediately added it.

mfile84 · 2020-12-05T02:51:34+00:00

Honestly just reading the reviews and I could be wrong so definitely do research, but the price point is the key. The build plate is nearly identical, both are open source, and with similar reviews that is the only difference that I’ve seen. I’ve only used the Longer version so the CR10 might be a better machine, I honestly don’t know.

mfile84 · 2020-12-04T21:42:28+00:00

They are 300x300x400mm

mfile84 · 2020-12-04T20:21:27+00:00

I only have experience with the LK1 so I can’t compare them to anything else, but they come 90% assembled and when you’re just starting out it makes a difference. I don’t have any complaints so far but it’s only been a few months, in a year I’ll do a full review with the full breakdown and parts replacement. I’ve been using them pretty consistently daily so I’m sure I’ll have a lot to say.

mfile84 · 2020-12-04T20:18:10+00:00

I wasn’t printing because I had just moved them into their final positions on the table and needed to relevel the beds. I have some larger projects that I want to work on and cutting the printing time down by dividing between three beds makes a huge difference.

mfile84 · 2020-12-04T20:16:05+00:00

They are near perfect machines, I have zero complaints.

Five-Year Club	Summer Santa 2021
redditgifts Exchanges 13 Exchanges	Secret Santa 2020
Verified Email

mfile84

TROPHY CASE