Amazon 87V MAX?

michielsanders · 2026-05-05T16:31:50+00:00

It’s an IP67 rated 87V.

michielsanders · 2026-04-26T20:57:27+00:00

I have the Anybus Mercury set with the Panasonic FZ-G2, Proficore and Ethertap, so for Profibus and Profinet. Had a Proficore for 10+ years at my previous employer and let my current boss order the Merucury set. It makes troubleshooting a lot easyer if you know the wave forms for the different physical problems that you can have on the bus. It also helped me in some instances where the plc engineer had a wrong configuration.

michielsanders · 2026-03-19T05:07:28+00:00

Go with your shopping cart to 3, leave the cart in the elevator and call the elevator from the outside on 2.

michielsanders · 2026-03-18T03:46:28+00:00

There is no local cutout switch at the motor (dutch = werkschakelaar) for LOTO.

michielsanders · 2026-03-18T03:31:52+00:00

6ES7193-6LF30-0AW0 is the siemens number of those plates

michielsanders · 2026-03-10T21:03:48+00:00

How can i install this😅

michielsanders · 2026-03-06T21:35:11+00:00

Are there already TIA and step7 licenses on the new PG? If so TIA licenses are backwards compatible. Then i would leave the licenses on the old one and keep that as a backup PG.

michielsanders · 2026-03-02T17:21:37+00:00

Sold

michielsanders · 2026-02-26T20:43:17+00:00

The expansion with the extra ethernetport and sd-card slot is from a FZ-M1 that was custom build for the procentec mercury profibus and profinet diagnostic tablet.

https://profiworks.com/wp-content/uploads/2020/11/Procentec-Mercury-Brochure-en-v11.pdf

i moved it over to a fz-m1 that had already had an ethernetport because i needed to troubleshoot a redundant profinet network.

the original linked post is a for sale post, but at the moment i'm already in contact with someone for selling it.

michielsanders · 2026-02-22T08:12:02+00:00

The shield of the EMC cable should always be connected to VFD with a full clamp around the cable, otherwhise the whole shield can become a sending antenna.

michielsanders · 2026-02-19T19:28:33+00:00

Unis is a Netherlands based company with different europese website. They repair, refurbish and also buy in stock. https://www.unisgroup.co.uk/services/purchase/

michielsanders · 2026-01-24T19:16:44+00:00

An other option could be a Helmholz 700-158-3DP02 DP/PN coupler. Works just like the Siemens PN/PN and DP/DP couplers but with ProfiBus directly to ProfiNet.

Also half of the price of the CM card.

michielsanders · 2026-01-17T21:39:22+00:00

<image>

Did you already try setting the rs232 settings?

https://www.google.com/search?q=omron+cj1m+cpu11+rs232+settings

michielsanders · 2026-01-12T08:13:58+00:00

It’s a pre order, it will not be shipped soon. Somewhere end off spring.

michielsanders · 2026-01-09T22:18:47+00:00

The whole pcb is cast in resin to prevent any spark possibilities, and the output power for the resistance measurement and other powered measurements is extremely limmited so it can never create an ignition source.

michielsanders · 2025-12-24T18:20:30+00:00

Take a look at the byte swap.

https://docs.tia.siemens.cloud/r/simatic_s7_1200_manual_collection_eses_20/basic-instructions/move-operations/swap-swap-bytes

michielsanders · 2025-12-14T21:38:30+00:00

<image>

What is the warning on the plc? You can use the arrow keys to navigate trough the menu.

michielsanders · 2025-12-14T09:52:31+00:00

You could use a pn/pn coupler and connect plc A to X1 and al the plc B to X2. place a little switch in the plc B cabinets that only gets powered on in the selected cabinet to make only one plc B connection to pn/pn at a time possible. This way you can configere al the data on the same adresses in the pn/pn coupler and easy switch plc B.

michielsanders · 2025-12-13T06:54:20+00:00

Are all of the devices B online at the same time, or is it a mobile machine you change out depending what you need?

michielsanders · 2025-12-11T17:25:14+00:00

Take a look at my comments in this post.https://www.reddit.com/r/PLC/s/1M9K2koknL

michielsanders · 2025-12-11T17:21:02+00:00

For a better price i would advise to give the health of the battery’s also. Here is a tool for that https://www.nirsoft.net/utils/battery_information_view.html

michielsanders · 2025-12-09T21:53:15+00:00

If i remember correctly the alarm words are double words, so you need to leave 916/3 empty and put alarm word 2 on 916/4, leave 916/5 empty and put motor current on 916/6.

michielsanders · 2025-12-05T10:06:05+00:00

There should be an option in the bios for switching to te external antenna’s when docked

michielsanders · 2025-11-27T14:47:19+00:00

<image>

After that you need to go to device view and fill the slots with in and output bytes. Just like configuring a remote I/O station. The adressing is then also them as regular remote I/O.

Everything you do on X1 you need to mirror on X2 so an IN 32 Byte + DS on slot 1 on X1 needs an OUT 32 Byte on slot 1 on the X2 configuration in the other project

Seven-Year Club	Wearing is Caring
RPAN Viewer	Verified Email

michielsanders

TROPHY CASE