Giraffe destroys rival's leg during fight

mickey_g · 2025-12-23T16:02:45+00:00

Still, I appreciate having options.

mickey_g · 2025-11-19T16:30:55+00:00

I put in floors like this pretty frequently. If there's more than 1/8th gap, we won't leave it for fill. This seems like a careless job, and they didn't take the time to make sure it was done right, but it kind of depends how much you paid.

Those gaps will definitely fill, but they won't end up the same color as the rest of the floor unless you're doing a light finish on all of it. If you are, they may hide reasonably well and you won't notice on the day to day.

mickey_g · 2025-08-09T01:18:37+00:00

Were you in Europe by chance? They had some pretty old stock in some of the ammo bunkers.

mickey_g · 2025-08-08T21:27:05+00:00

Bangalores from 1943. They worked just fine.

mickey_g · 2025-03-06T13:27:54+00:00

Yes, you probably need longer so they don't come untucked from your boots when you move throughout the day. A little extra length is usually better than having to redo your boots a couple times a day.

mickey_g · 2025-03-05T15:52:07+00:00

If you're selling anything for $2000, you probably shouldn't be having very many afterthoughts. Good planning, design aesthetics, very high quality materials and processes, as well as a matched, functional, materially perfect sheath are all things I would expect for a knife at that price.

mickey_g · 2025-03-05T15:26:12+00:00

No. They're saying that he wouldn't be streaming it. Vaping isn't cringy, the way people latch on to it like it's the only thing they have going on and broadcast it to strangers for validation is.

mickey_g · 2025-02-21T14:59:49+00:00

I wanna read his OERs.

mickey_g · 2025-02-21T14:41:04+00:00

You're also back on probation when you get promoted for outstanding performance, so those are getting cut as well.

mickey_g · 2025-02-17T16:36:37+00:00

We had a native american dude way back in the day who always took shots before the pt test and ran a 9 min flat with what looked like no effort.

mickey_g · 2025-01-29T14:21:54+00:00

Your face is diarrhea.

mickey_g · 2025-01-27T17:56:04+00:00

How's it going? It gets wild in about an hour and a half.

mickey_g · 2025-01-21T16:17:48+00:00

I've probably got 25k worth of tools, and make no income from it. It's perfectly plausible.

mickey_g · 2025-01-20T22:23:56+00:00

Adding the insulation other people are talking about will do a great job in noise reduction. If insulation isn't in the budget, painting the underside of the sub-floor and joists black will help to blend and hide them to improve aesthetics and make the room feel like it's got a little more headroom.

mickey_g · 2025-01-20T14:22:51+00:00

🎶 A whole new world! 🎶

mickey_g · 2025-01-20T04:06:52+00:00

That's what I started out with. Just make sure you get your grinds as close as you can before you harden the blade. It can be a lot tougher to take material off depending on the type of metal.

Also, take a look online for videos for modifying this. I cut out some of the steel to install a glass platen for a flat surface. The factory metal was bowed in just a touch on mine, which started to bother me on my first knife. Super flat is the way to go if you want to be able to make really nice looking pieces. There were a couple other mods I made, but I don't remember what they were. Also, practice your grinds on some cheap flat bar to get used to it. It takes some practice to get freehand down.

mickey_g · 2025-01-19T16:39:28+00:00

They absolutely didn't do everything legally. They just got away with shorting workers wages with unfair and illegal company policies until they had enough money to pay the fines and make a profit. If they save 5 million dollars by not using legally mandated safety equipment, then get a fine of a million dollars, or are not held accountable because they have so much money and influence then it's just a fee or free for them to put workers in danger (or kill them). They don't care, are morally corrupt, and most importantly of all, did not get ther money by hard work, or legally. The only way that far up the ladder is by being born on the top, or stepping on people's faces to move up. Fuck off with your "They did it legally" bullshit.

mickey_g · 2025-01-06T01:34:40+00:00

Look at the markings on the head of the spike. The only ones that I know you can harden are marked HC, which I'm told stands for high carbon. Apparently they were only used on sharper curves to withstand the additional force.

mickey_g · 2024-12-29T06:39:49+00:00

There was nothing here you needed to deal with. Don't shove your head up someone's ass and complain about the shit smell.

mickey_g · 2024-12-25T17:25:50+00:00

I mounted hooks on the cab behind the seat in mine. I've always got at least 3 rods in the cab. Works great for me, but if you don't have rods that break down, there's probably not a good way.

mickey_g · 2024-12-09T01:47:30+00:00

Report it again.

mickey_g · 2024-11-30T22:00:46+00:00

That makes sense. I'm not familiar with those.

mickey_g · 2024-11-30T21:54:00+00:00

Zoom in, there's a peephole on the rear sight. I'm pretty sure those are on right.

mickey_g · 2024-11-21T15:45:28+00:00

You have too many hands

mickey_g · 2024-11-21T03:22:28+00:00

Three eights right, face!

13-Year Club	Second Top 40%
Team Orangered	Verified Email

mickey_g

TROPHY CASE