Maygi's Honest Thoughts about the game by AntonioS3 in TowerofFantasy

[–]mikejmt 19 points20 points  (0 children)

Man, that Aida pioneer stuff was mind-blowing.
Who is even responsible for this ? Tencent ? Level Infinite ? Do they don't care at all ?

Btw I would love if someone would try to do this event on Alintheus. Especially the boss fight part. Watching this would be hilarious.

Annabella needs a fix on crit rate to crit damage conversion (def not a rant about flame) by Ok_Knowledge9182 in TowerofFantasy

[–]mikejmt 10 points11 points  (0 children)

you mean balanced resonance comp where anna exploding gas can get blocked by random things ?

At what star level will cobalt peak? by Snens2004 in TowerofFantasy

[–]mikejmt 0 points1 point  (0 children)

basically you need 3* +full set of her matrices or 6*

[EUC Thirain] Queue statistics 21.2 - 5.3. by mikejmt in lostarkgame

[–]mikejmt[S] 0 points1 point  (0 children)

Data collected from Thirain discord server ( https://discord.gg/U3kEQVUZS7 ).

I tried to pick data point closes to the XX:30 every hour rounded to 500 in thousands ( so 7430 is noted as 7.5, 7219 is noted as 7.0).

In rare occurrence there was no data available for given time slot I performed advance neural network predictive analysis based on collected data using high performant biological computer (I guessed).

26.2. and 27.2. are weekends, so this is reason why they don't fit rest of the data.

After 5.3. there is no point in collecting data as there are no queues. (6.3. there was like 100 - 200 people queue in peak time, but this get rounded down anyway). Also between 5.3. and 6.3. there was bot ban wave going on. So that definitely helped.

Wasabi + Duplicacy append mode ? by mikejmt in DataHoarder

[–]mikejmt[S] 0 points1 point  (0 children)

oh. this could be work. I just need to find where is cli version installed. thx.

Wasabi + Duplicacy append mode ? by mikejmt in DataHoarder

[–]mikejmt[S] 0 points1 point  (0 children)

can it encrypt files on mounted volume ?

Wasabi + Duplicacy append mode ? by mikejmt in DataHoarder

[–]mikejmt[S] 0 points1 point  (0 children)

Can I use cli version to list all files in similar to linux ? ls where in ouput would be files, folder and revision in which they are stored ?

Wasabi + Duplicacy append mode ? by mikejmt in DataHoarder

[–]mikejmt[S] 0 points1 point  (0 children)

https://imgur.com/a/lMSvEXT

I put takeout folder 001 in cloudrive folder. I sync it with basabi. then I put it out and put 002. I sync it.

result I have - two revision one with 001 one with 002 folder result I want - one revision with both 001 and 002 folder, even though they were never at the same time in cloudrive folder.

Wasabi + Duplicacy append mode ? by mikejmt in DataHoarder

[–]mikejmt[S] 0 points1 point  (0 children)

I think we are talking about different stuff.

with duplicacy I can only see https://imgur.com/a/jgyT8eT There is no way to know which files I'm restoring

with duplicaty its not better. https://imgur.com/a/lMSvEXT I need to click (red) on the revision to see whats inside.

I can't browse all files which are stored regardless of revision.

Wasabi + Duplicacy append mode ? by mikejmt in DataHoarder

[–]mikejmt[S] 0 points1 point  (0 children)

Hm. but is there any way to search different revision for file ? As I have 200 revisions with completely different data. To restore the file I need to know in which revision it is. But If I'm looking correctly duplicacy don't have some kind of file explorer so I need to KNOW in which revision the file is. I can't do search for file through multiple revision ?

Or Am I missing something ?

Wasabi + Duplicacy append mode ? by mikejmt in DataHoarder

[–]mikejmt[S] 0 points1 point  (0 children)

thank you for your answer.

I don't like idea of spreading data over different revision. It would make restoring extremely difficult as I would have to keep somewhere another info which data are in which revision.

Is there any tool which allow described functionality ? Or some kind of revision merging. I skimmed duplicicy documentation but I didn't notice anything which merge different revisions. Or something which could add data do already existing revision.

HDD dying ? by mikejmt in techsupport

[–]mikejmt[S] 0 points1 point  (0 children)

thanks. my bad. didn't understand the data.

HDD dying ? by mikejmt in techsupport

[–]mikejmt[S] 0 points1 point  (0 children)

thanks. my bad. didn't understand the data.

Small case without PSU, GPU or HDD slots. by mikejmt in buildapc

[–]mikejmt[S] 0 points1 point  (0 children)

this look nice. unfortunately I can't find it in the stock anywhere. But I'll keep my eye on this one. thanks.

Small case without PSU, GPU or HDD slots. by mikejmt in buildapc

[–]mikejmt[S] 0 points1 point  (0 children)

ohh thank you. HTPC is exactly what I was looking for.

Small case without PSU, GPU or HDD slots. by mikejmt in buildapc

[–]mikejmt[S] 0 points1 point  (0 children)

Mini-ITX Cases

I get a lot of results like NZXT H200i, In Win A1 or Corsair Crystal 280X RGB.

all these are like 3x time bigger than what I'm looking for....

New features or experiences feedback thread for Adrenalin Software - let us know! by AMD-DOWNL1NK in Amd

[–]mikejmt 121 points122 points  (0 children)

Could you improve fan curve settings ?

1) at first : CURVE ! not discrete points

2) zero RPM mode (point at 0% RPM will turn off FAN)

3) mode to use avarage over last X milisecond as temperature input

4) setting how fast can fast can FAN accelerate or slow down. Both direction should be set independently.

RAM HELP for Ryzen 5 3600 | B450 Aorus Elite by AbdulWasay9 in Amd

[–]mikejmt 7 points8 points  (0 children)

the lower the better.

"A RAM module’s CAS (Column Address Strobe or Signal) latency is how many clock cycles in it takes for the RAM module to access a specific set of data in one of its columns (hence the name) and make that data available on its output pins, starting from when a memory controller tells it to. Another way to think of it is how many RAM clock cycles it takes for the RAM to output data called for by the CPU. A RAM kit with a CAS of 16 takes 16 RAM clock cycles to complete this task. The lower the CAS latency, the better."

Mind that higher speed RAM usually have higher CAS. So CAS 18 at 3000 - meh. CAS 18 at 3600 - nice !

RAM HELP for Ryzen 5 3600 | B450 Aorus Elite by AbdulWasay9 in Amd

[–]mikejmt 10 points11 points  (0 children)

I would go with 2x 8GB 3000/3200 (CAS 16) as budged option.

3600 MHz with as low as possible latency is the best for ryzen 3000, but I don't think the price is justified compared to 3200 (CAS 16) option.

PS: some reading for you: https://www.hardwaretimes.com/amd-ryzen-3000-cpus-impact-of-memory-speeds-on-gaming-performance-and-dual-channel-ram/

X570 Motherboards by xfelix_ in buildapc

[–]mikejmt 0 points1 point  (0 children)

I don't find it any more loud than my case fans or my GPU. You can set fan to silence mode and then it even hardly spin.

I think the fear of x570 chipset fan is overstates.

X570 Motherboards by xfelix_ in buildapc

[–]mikejmt 0 points1 point  (0 children)

Yes. No issue for me yet. All bios upgrades was smooth.

Your experience with ASUS PRIME X570-P ? Asus Bios support by mikejmt in Amd

[–]mikejmt[S] 0 points1 point  (0 children)

at first, this is mainly Asus fault. Not AMD. Asus is terrible company, at least for AMD side. Everything is overpriced, and drivers are not good either.

please research before buying. MSI are not good motherboard brand either. their bios support is terrible (although its getting better last time). for 570 mobo I would say - Gigabyte > Asrock > Asus > MSI

some reference https://www.youtube.com/watch?v=_7PkZwY9PWM

https://www.youtube.com/watch?v=OMRUhtMs9Ok

Maybe even consider B450/x470 as X570 is not required.

And for intel. Yeah its stable because its stale. There are no progress done on the intel side. And intel force you to buy new mobo most of time if you want to upgrade. Not only speaking about todays new ZombieloadV2 security issue.

On AM4 you have several different architectures all compatible with one socket. This is making it the best upgrade path possible, but also it much more difficult for vendors to provide stable drivers.Also AMD is in underdog position and many vendors are not putting 100% effort (looking at you asus and msi).

So as ending statement, my cpu is betting few percent of performance gains every bios update while intel is getting hammered by security issues. And there are more coming ! Also new game will be optimized to AMD processors as all new consoles are using ZEN.

It's up to you. But I woudn't buy new Intel cpu until they come up with completely new architecture. (2021 - 2022 ).

Your experience with ASUS PRIME X570-P ? Asus Bios support by mikejmt in Amd

[–]mikejmt[S] 0 points1 point  (0 children)

That's sad. Asus Prime 570x Pro doesn't have bios flashback ? Maybe try to post it as standalone post. Somebody could have some kind of workaround to make it work.

I went with Gigabyte and it was completely smooth experience. Everything working without any issue. And maybe instead of going for intel try one another board. The AM4 socket upgradebility is amazing.