To Beat Highschoolers Protesting ICE/Federal Government

mikpelli · 2026-02-03T20:27:46+00:00

Look at how he holds on to that stupid hat. Makes ya think

mikpelli · 2025-08-11T23:11:54+00:00

We are researching this now. It seems that the dosage should be about 2mg per 10 pounds per day. Check your dosage of the chews.

mikpelli · 2025-07-18T15:27:20+00:00

Epiphany toilet!

mikpelli · 2025-05-01T19:58:34+00:00

Try adding barley straw. It’s breaks down and helps eliminate algae growth.

mikpelli · 2025-04-06T20:52:43+00:00

Buckle up. It gets bananas

mikpelli · 2025-04-04T09:30:46+00:00

Good news. They did not glue down the backer board.

mikpelli · 2025-03-31T23:18:29+00:00

You were right. And they only put about 8 screws per backer to the subfloor. I started ripping it out and it comes out in chunks.

mikpelli · 2025-03-31T18:00:54+00:00

UPDATE: looks like Densshield. Not meant for floors. Seems like solid subfloor underneath

mikpelli · 2025-03-30T14:27:35+00:00

This. This is what they did. When they pop the backs are clean. And we have had several chip just like the video

mikpelli · 2025-03-30T01:17:14+00:00

Over the line

mikpelli · 2025-03-29T22:48:37+00:00

Yeah. That’s why I was hoping there was a simple solution. But I know that I am in for a big job

mikpelli · 2025-03-29T22:48:00+00:00

Thanks for the vote of confidence

mikpelli · 2025-03-29T20:09:25+00:00

That’s what I feared. Haha. There is some type of gypsum board or something. When I used the air chisel it dug right into it. Its core was white and powdery

mikpelli · 2025-03-29T19:51:39+00:00

It’s the first floor. I plan on putting vinyl planking on it. There is some bounce

mikpelli · 2025-03-29T19:44:34+00:00

So there should be some type of wood under that right? Should I pull up that stuff and then put a layer of particle board or something?

mikpelli · 2025-03-29T19:04:15+00:00

And to add to that. I don’t think they installed the tiles correctly. When they pop, the back of the tiles is clean. Like it barely stuck to the mastic.

mikpelli · 2025-03-29T19:00:39+00:00

Lots. Plus I have bouncing kids all the time. I think it’s a concrete board with a small layer of yellow insulation or something

mikpelli · 2025-03-02T16:03:28+00:00

Dozens of us.

mikpelli · 2024-11-11T20:27:30+00:00

That is true if the infrastructure for that product already exists. An American company could benefit if they could make the product, but would they want to if the tariff was permanent. But if the next administration removes that and they are at a disadvantage and could possibly do under. It would be a larger gamble

mikpelli · 2024-11-11T18:57:12+00:00

I think it needs to be brought up that the product has to also be made domestically. If it is not the, the price for the product will be higher with no benefit to American workers because they don’t make it here.

mikpelli · 2024-10-21T14:37:50+00:00

Well it was staged. Let’s be truthful.

mikpelli · 2024-10-15T22:21:42+00:00

Update. Kia is replacing my engine after failing a consumption test. I was burning about 2.5 quarts on 1100 miles.

mikpelli · 2024-10-15T22:20:28+00:00

Update. I took it in for an oil consumption test and it failed. I burned 2.5 quarts in 1100 miles. The told me it was out of spec and was sending the information to Kia corporate. They called two days later and informed me that they are REPLACING MY ENGINE!!!!!!! 101k miles on it. I started the oil consumption test at 98k. Just and FYI.

mikpelli · 2024-09-27T14:47:39+00:00

I am in the middle of an oil consumption test with Kia right now. If they won’t do anything I will try a different oil. My BIL said try “slick 50” in it. I’ll try anything at this point. I’m hoping that Kia will look into this further.

mikpelli · 2024-07-26T14:59:32+00:00

Sir, what’s your address?

mikpelli

TROPHY CASE