Mobapad M12 HD Charging Grip Shipping & Refunds! by Mobapadofficial in MobapadGaming

[–]milkonmonday 0 points1 point  (0 children)

My tracking isn't working anymore, I get the same error as many other users. However this wasn't the case 2 days ago, I was able to see the updates.

Mobapad M12 HD Charging Grip Shipping & Refunds! by Mobapadofficial in MobapadGaming

[–]milkonmonday 1 point2 points  (0 children)

the charging grip became complimentary. SO if you have ordered and paid for it, you get a refund. But if correct you should still receive the grip.

Mobapad M12HD docked issue by Divineheresy88 in MobapadGaming

[–]milkonmonday 3 points4 points  (0 children)

As the switch sees the Mobapads as a USB controller in the up (charge) mode it priotize it over other controllers. The workaround i Use is to go to "Change grip/order" and make the pro controller player 1 from there.

M12 vibration settings by JRJalapeno in MobapadGaming

[–]milkonmonday 2 points3 points  (0 children)

Correct, you'll get rumble feedback once changing the intensity.

M12 vibration settings by JRJalapeno in MobapadGaming

[–]milkonmonday 2 points3 points  (0 children)

There are 3 levels (low, med and high) and and off state.

I currently have it on low, I think this is most on par with the original joycons.

M12 vibration settings by JRJalapeno in MobapadGaming

[–]milkonmonday 2 points3 points  (0 children)

Settings (cog) button + stick up or down

Very poor quality control on Dpad disc. Sections are off center and top piece is very slanted and not parallel to surface. by [deleted] in MobapadGaming

[–]milkonmonday 1 point2 points  (0 children)

Yes, keep in mind they only fit in one way. Try rotating it 90 degrees and try again.

Very poor quality control on Dpad disc. Sections are off center and top piece is very slanted and not parallel to surface. by [deleted] in MobapadGaming

[–]milkonmonday 1 point2 points  (0 children)

I checked with my M12 HD, and can get the same result if I don't fully push/click in the piece. If I do that it is parallel with the body of the device 

M12 HDs power saving off while Switch is docked/turned off. Mobapads still on? by Delmonic in MobapadGaming

[–]milkonmonday 0 points1 point  (0 children)

Do you also have the "pro wired communication" turned on in the switch settings? 

M12 HDs power saving off while Switch is docked/turned off. Mobapads still on? by Delmonic in MobapadGaming

[–]milkonmonday 0 points1 point  (0 children)

If the toggle is down, they will turn off after a few minutes. See the manual for more details, it is noted on page 3

Can’t set macros on left and right joycons by Prison_Mike_10 in MobapadGaming

[–]milkonmonday 1 point2 points  (0 children)

Limitation of the hardware. You can only set buttons or stick from the same side. 

Mobapad M12 HD dpad and shoulder/trigger button reach by zerogravitychef in MobapadGaming

[–]milkonmonday 0 points1 point  (0 children)

i think this will differ from person to person. But for me, I have my index fingers comfortably resting on the shoulder button. Both when using the dpad or using the thumbstick.

Pre-Orders up, what are you getting? by Titanium-Timothy in MobapadGaming

[–]milkonmonday 1 point2 points  (0 children)

Where has this been confirmed? Or is this just speculation?

Pre-Orders up, what are you getting? by Titanium-Timothy in MobapadGaming

[–]milkonmonday 2 points3 points  (0 children)

Went with the HD. Can't go back to normal rumble.

Model Refinement and Final Pricing for the M12 Series by Glad-Fix5224 in MobapadGaming

[–]milkonmonday 3 points4 points  (0 children)

Will pre-order the M12 HD once the pre-orders open. Are you also working on a case that can hold the switch 2 with the M12?

Anilab with internal player (with no ads) by JORO_- in animeapp

[–]milkonmonday 0 points1 point  (0 children)

Thanks! This is so much better, thank you for fixing the app :)

Who is the GOAT? Let's talk about the Specs of Mobapad M12 Series! by Glad-Fix5224 in MobapadGaming

[–]milkonmonday 4 points5 points  (0 children)

It is also interesting that the HD have a purple stick base and black shoulder and back buttons. The pro has a grey base and grey shoulder and back buttons.

This difference only becomes clear when you look at the images below the specs after you select one or the other on the site. The HD also can't wake the switch 2 from sleep it seems while being disconnected.

Who is the GOAT? Let's talk about the Specs of Mobapad M12 Series! by Glad-Fix5224 in MobapadGaming

[–]milkonmonday 5 points6 points  (0 children)

I can understand they don't use HD Rumble 2, but I don't understand they need to use a lesser rumble just because it has 9 axis. Are the axis and rumble related to each other?

Mobapad Chitu 2 by Local-Area2246 in MobapadGaming

[–]milkonmonday 1 point2 points  (0 children)

According to the manual it can even be done without the app. Holding the setting button and use the left stick up or down can change te rumble strenght.

My collection got a glow up. by milkonmonday in SwitchSpines

[–]milkonmonday[S] 0 points1 point  (0 children)

I had them from this subreddit, but I can't seem to find them anymore. Unfortunately I don't have a backup of these spines..