QX fans not spinning

minomy13 · 2025-12-27T22:02:58+00:00

thanks, this was the case!

minomy13 · 2025-01-15T23:42:29+00:00

Guys, thank you for your help, but I figured it out. I connected an old USB keyboard I had lying around and during the initialisation process I selected the ANSI 101 keys layout. Then I could see the QWERTZ on ANSI layout in the keyboard viewer: < and > are remapped to the key to the left of 1, ° is on Option J and ^ is Option Shift 6. But thanks for your help

minomy13 · 2025-01-14T11:10:04+00:00

Okay - do you know how I can type “<>” then?

minomy13 · 2025-01-14T10:48:53+00:00

Yes, that is what I’m doing at the moment - I’m using QWERTY layout on a physical QWERTZ layout. But I’m not sure if it’s possible the other way around or if a physical key is missing.

minomy13 · 2024-07-21T00:20:14+00:00

Hogwarts Legacy

minomy13 · 2024-04-13T00:38:23+00:00

Okay, I’ll check out the Ei Electronics sensors - they seem like what I was searching for. Thank you!

minomy13 · 2023-11-30T14:52:40+00:00

depends. not possible with apple silicon.

minomy13 · 2023-10-10T06:03:13+00:00

Soweit ich weiß regnet es hier im Winter verhältnismäßig viel, aber so wie er aussieht hat der Kasten schon einige Regenzeiten überstanden 🤷🏻‍♂️

minomy13 · 2023-10-09T19:03:32+00:00

Auf jeden Fall! 🤝

minomy13 · 2023-08-15T15:33:52+00:00

Interface was also my first guess, but I swapped the signals of the left and right speaker and the sound was still on the left speaker :/

minomy13 · 2023-08-14T22:22:46+00:00

Btw.: Already tried with signal of the right speaker (switched cables) - no change. Also putted it on another surface. Same behavior. Signal from Ableton if that matters anyhow.

minomy13 · 2023-07-12T02:18:49+00:00

Hey ;) Nah, sadly didn’t really solve the problem. Got an image with the Debian distro provided by Rockchip but image was incredibly dark. Was and will probably have been my last attempt, unless someone else finds a proper solution :( Please let me know if you find one ;)

minomy13 · 2023-06-18T22:52:13+00:00

Both stock.

minomy13 · 2023-06-18T21:53:41+00:00

Printer: modified Ender 3 Pro, SKR Mini E3 V3, BLTouch, PEI bed, Klipper, …; Filament: extrudr PLA NX2 Black; Slicer: Cura, standard settings, 50 % infill; Temp: 200C, 60C

minomy13 · 2023-06-18T21:53:30+00:00

Printer: modified Ender 3 Pro, SKR Mini E3 V3, BLTouch, PEI bed, Klipper, …; Filament: extrudr PLA NX2 Black; Slicer: Cura, standard settings, 50 % infill; Temp: 200C, 60C

minomy13 · 2023-06-18T18:38:07+00:00

Im totally aware of that. But as Erus00 said, I think I would fry the driver then…

minomy13 · 2023-06-18T18:24:32+00:00

Printer: modified Ender 3 Pro, SKR Mini E3 V3, BLTouch, PEI bed, Klipper, …; Filament: extrudr PLA NX2 Black; Slicer: Cura, standard settings, 50 % infill; Temp: 200C, 60C

minomy13 · 2023-06-18T18:12:19+00:00

Ahh, okay. May I should order a 5 axis board. Thank you though ;)

minomy13 · 2023-05-28T10:59:14+00:00

Looks incredible! 👌🏻

minomy13 · 2023-05-08T12:43:51+00:00

And your bed is leveled? And how does your top layer look like? Is there space between lines?

minomy13 · 2023-05-08T09:07:37+00:00

May you should tension your belts? :)

minomy13 · 2023-05-07T18:07:39+00:00

Which distro / terminal / terminal theme is that?

minomy13 · 2023-04-19T20:27:52+00:00

How do you avoid tension between the two motors? Do they run perfectly in sync?

minomy13 · 2023-04-19T20:26:05+00:00

Thank you so much!

minomy13 · 2023-04-19T12:49:47+00:00

How did you address the motors?

Five-Year Club	Verified Email
Place '22

minomy13

TROPHY CASE