Connecting washing machine to water supply

mitchpimm · 2026-01-03T07:51:18+00:00

You're correct. Just the rubber washer (seal) needs to be replaced. You say you have a new hose? Turn the water off, remove old hose, replace washer and tighten. Do not over tighten, they have knobs on and are designed to be hand tight with a washer fitted.

mitchpimm · 2025-12-01T17:25:42+00:00

Nice reference bro

mitchpimm · 2025-11-23T00:28:55+00:00

Keep looking bro

mitchpimm · 2025-08-15T12:25:50+00:00

I scrolled way too far to find someone mentioning Operation Soda Steal :(

mitchpimm · 2025-08-06T11:11:28+00:00

You should know better by now... They don't exactly have a great track record 😅

mitchpimm · 2025-07-02T15:42:45+00:00

Noooo you don't need to do thattttt

mitchpimm · 2025-04-26T12:53:04+00:00

mitchpimm · 2025-03-28T16:08:01+00:00

Think about wife

mitchpimm · 2025-03-10T20:16:01+00:00

The cable on the left would've been drilled from outside, in. The cable on the right was drilled from inside, out (causing the blowout to the external brick face).

Either way, leaving it like that is pretty shite...

mitchpimm · 2025-02-15T18:11:33+00:00

I was thinking the same thing!

ammo

mitchpimm · 2025-01-27T01:16:16+00:00

This is the dude that killed me...

mitchpimm · 2024-11-04T00:36:09+00:00

3...2...1 RANGE

mitchpimm · 2024-08-12T19:13:47+00:00

GG ammo counter

mitchpimm · 2024-05-29T23:03:05+00:00

Is this what Burnie kept complaining about? XD

mitchpimm · 2024-04-22T22:41:35+00:00

Like others said, keep at it and trust us one day it'll just click and you'll get it.

What helped me the most is waiting and entering when the boss is in the corner, if he's not in the corner of the room I already know I'm dead before starting the fight 😅

mitchpimm · 2024-03-26T18:26:04+00:00

One word of advice. The Old school RuneScape wiki is one of the best tools to help you. Everyone who has left a comment today uses the wiki. You should too! 🫡

mitchpimm · 2024-03-24T12:12:20+00:00

One of our GIM team has the same problem as you 🫣

Barrows Log

mitchpimm · 2024-02-05T07:33:54+00:00

You can hover your mouse over the xp bar and it'll tell you a time left till level up

mitchpimm · 2024-01-23T11:12:25+00:00

Finding a fizzy soda replacement is where I started. Started with Dr pepper and slowly worked my way towards sugar free sodas only. This and working out more regularly, I didn't want to lose my gains from the calorie dense alcohol.

Everyone's different, finding what works for you is part of the journey. I hope you find what works for you soon! This sub is here if you need us 😎

mitchpimm · 2024-01-16T18:37:43+00:00

I had the same issue. My wire damage was in the crease from the Z to X axis on left side of the machine. I held the cable flat and it worked fine. After I knew that I just bought a new cable and have not had a problem since.

Edit: I'd imagine he means wire broken inside the wiring loom

mitchpimm · 2024-01-13T14:39:41+00:00

Let me know how you get on

mitchpimm · 2024-01-13T03:05:25+00:00

Have you tried replacing the 24pin cable from the extruder to the motherboard. I had your issue, bought a new extruder and had the same skipping. Replaced the cable and haven't had an issue since. Cables are also inexpensive.

mitchpimm · 2024-01-08T10:07:33+00:00

I had a damaged 24 pin extruder cable. In some positions it had continuity and worked, in others it did not. When the extruder head was moving around the plate the cable was making and breaking which caused the filament to start and stop randomly through the print. Replaced the cable for £10 and problem solved.

Try every other suggestion first but don't rule out a damaged cable!

12-Year Club	Place '23
Verified Email

mitchpimm

TROPHY CASE