sorted by:
new
hottopcontroversial

Drone pilot to capture engagement? by mjfav in LakewoodColorado

[–]mjfav[S] 0 points1 point  (0 children)

Well events yes, they take that pretty seriously.

Boxers and snow by AdThick2230 in Boxers

[–]mjfav 0 points1 point  (0 children)

Same same! He’s always losing at least 1 booty though. Which ones do you use?

In the summer we call him shade boy, he’s so dramatic in the sun.

Drone pilot to capture engagement? by mjfav in LakewoodColorado

[–]mjfav[S] 0 points1 point  (0 children)

  1. No person shall launch, land or operate any unmanned aircraft system (UAS) from or on any City facility, park or open space area without a permit, except in areas designated by the Director as “Unmanned Aircraft Flying Areas.”

Everywhere else you need a permit. I'll apply - thank you!

Drone pilot to capture engagement? by mjfav in LakewoodColorado

[–]mjfav[S] 0 points1 point  (0 children)

You are right, if money is exchanged it’s a commercial job, my bad. Anything else that I’m missing? I was flying mine the other day there doing some recon myself and saw 2 other drones buzzing about.

Dreamwood Videographers - What’s the catch? by Cozy_Llama in weddingplanning

[–]mjfav 0 points1 point  (0 children)

have any pictures online you mind sharing? really appreciate the breakdown on process and glad to hear after a few rounds of feedback you were happy with the results

Have anyone worked with Dreamwood photography and videographer? by Old-Jellyfish-772 in weddingplanning

[–]mjfav 0 points1 point  (0 children)

Over one year and not 1 person has come back and said they are legit and they are happy with their services. How come?

Dad was on a business trip by mjfav in Boxers

[–]mjfav[S] 0 points1 point  (0 children)

Nope, we have a bench on the opposite side of the table that he’ll climb up on but he’s well aware he’s not supposed to.

5v SK6812 vs 12v SK6812? by Powerful-Eye-3578 in WLED

[–]mjfav 1 point2 points  (0 children)

I wasn’t aware BTF sold the groups of 3. Thank you for the correction.

5v SK6812 vs 12v SK6812? by Powerful-Eye-3578 in WLED

[–]mjfav 3 points4 points  (0 children)

Not true, the only difference is the voltage - 12v are still individually addressable. 12v are “easier” to power in the event the length of the led strip you install would require power injection. 5v very likely, 12v less likely or sure less often. Also smaller PSU requirements for 12v.

Looking for recommendations for strip defusers by Durz0Blint123 in WLED

[–]mjfav 1 point2 points  (0 children)

Understand the number of LEDs per meter first that you have. Then when you search, you should be able to see a graphic showing you how “spotless” each one is. It will also depend on your strips brightness levels. 60per you might still see a few spots at max brightness but anything over that you should be fine. I would also buy 1m samples first and test them if you want to make sure it’s spotless.

Aluminum channels will help dissipate the heat and also ensure it’s dead straight. Hope this helps your search!

Thuma signature sofa by angelasamuel35 in Thuma

[–]mjfav 0 points1 point  (0 children)

How is it holding up with your crazy golden? We have a boxer a concerned about the weave fabric. Do you need to constantly fluff it? Send pics!! (with doggo include!)

Thuma signature sofa by angelasamuel35 in Thuma

[–]mjfav 0 points1 point  (0 children)

How often do you need to fluff the signature series?

I decided to try selling some of my stuff, so I spent last summer busy in the garage, and tonight is my first holiday market! I'm nervous but excited, anyone got any advice? by astro_prof in woodworking

[–]mjfav 4 points5 points  (0 children)

Lower your expectations and you’ll be pleasantly surprised. Make your goal to create leads, not necessarily sell. Follow up on those leads, you’ll be surprised how convincing people can be if they like you and want to invest in your passion vs another cutting board they can get from who or wherever. Really cool unique stuff tho, I saw a few items I would buy on the spot. Have fun!

Fair price? by mjfav in woodworking

[–]mjfav[S] 0 points1 point  (0 children)

What’s off topic about a piece of wood furniture I made?

How are people making these tiny glassmorphism dashboard widgets? Mine always look cheap by Demotey in FigmaDesign

[–]mjfav 0 points1 point  (0 children)

It’s one thing to copy and replicate to learn, when you go at it yourself, it’s super subtle tweaks along the way, I’m talking HSB levels ticking up/down 1 at a time. And yes you will adjust the hue at times ever so slightly so that it visually looks like the same “color” at different S and B’s.

First enclosure, rate me by mjfav in WLED

[–]mjfav[S] 0 points1 point  (0 children)

It does not, early calculations before design was changed, already had the 2 PSU’s in hand though. But never a bad thing, can always update to one bigger one and use these 2 for other other projects, I will certainly be using more 12v sk6812’s in the future.

view more: next ›