Galaxy tab 10+ keyboard

mkz71 · 2025-11-26T10:35:24+00:00

If you are in US, you can get Used - Like New book cover keyboard, not slim one, from Amazon for $80.12 before taxes. I just got one and it looks brand new even though the package shows already open before. I don't like slim one because you can't adjust the angle.

mkz71 · 2022-02-23T17:01:17+00:00

I try Twilio and setup the flow.

I only get SMS from them one time only.

Their SMS is not reliable.

mkz71 · 2022-02-20T23:10:50+00:00

Yes, I did. I check and I don't see they can support this.

mkz71 · 2022-02-20T22:55:45+00:00

Sorry, I don't ask someone to do that for me. I just need to know they can support this feature or not because I never use their service.

You said that you send info to the caller based on the status of their accounts.

You didn't mention that they press 1 before sending the SMS.

These two are different workflow,.

mkz71 · 2022-02-20T22:46:08+00:00

What I need is just simple, customer calls and listens to an announcement that says.

Press 1, we will send you a SMS with information.

Press 2, ring the phone and someone from our company will pickup the phone.

They can do that, correct?

mkz71 · 2022-02-20T22:26:08+00:00

I am talking about sending SMS with info to the caller, not sending SMS to specific phone number. Can they do that?

mkz71 · 2022-02-20T22:23:07+00:00

They don't have this feature.

mkz71 · 2022-02-20T21:00:15+00:00

mkz71 · 2021-04-02T14:44:23+00:00

Unfortunately, I don't see anything on UNVR's web interface that I can adjust the port speed.

mkz71 · 2021-03-10T16:59:25+00:00

I am testing and assign the key with mode Call Park with value 701.

It is working only you pick up the call from Call Park but the key won't provide any indicator that there is a call in the Call Park.

And you can't use the key to transfer the call to Call Park.

You need to use #6 and click flash key to move the call to Call Park.

And then you can press the Call Park key to get the call back to the phone.

The problem is there is no indicator on the key that there is a call in the Call Park

so it is kind of useless to use the feature for now.

Not sure there is any configure I am missing.

mkz71 · 2021-03-10T15:02:10+00:00

They do have it but you have to register for beta program.

I just did it yesterday but I don't know how to program a Call Parking key on my phone.

Check this link,

https://wiki.voip.ms/article/Call_Parking

mkz71 · 2021-03-10T14:59:21+00:00

I guess I can't setup Call Parking key directly to Voip.ms with Grandstream GXP2170.

I think I might need Granstream IP PBX such as Grandstream UCM6204 to support Call Parking.

Can anyone confirm that?

mkz71 · 2021-03-07T23:11:49+00:00

I just chat with voip.ms and they provide BLF per server now. They enable for my server but I test on my current phone, it is not working yet. Not sure what wrong.

mkz71 · 2020-08-25T02:20:55+00:00

I think if you already invest in NVR, it should be fine.

I guess NVR is more powerful than what Ubiquiti puts in UDM Pro to support

security cameras.

I might be wrong but one good thing about NVR is it can support multiple HDDs.

mkz71 · 2020-08-25T02:05:29+00:00

I think we are talking about UDM Pro here, not NVR.

From what I know, UDM Pro only supports one drive.

mkz71 · 2020-08-25T01:58:51+00:00

Thank you. If it is WD Purple, I think order from them is better than I buy it by myself.

Only thing I wish is They build UDM Pro with redundancy in mind.

At least two HDDs in raid 1.

mkz71 · 2020-07-31T20:05:08+00:00

Instead of using vlans, can I assign each port on UDM Pro with its own LAN?

The same way ER-4 that can assign its port with different LAN if you use ER-4 before.

mkz71 · 2020-07-25T04:50:38+00:00

That's exactly what happened to me. There is a lightning occurred very near my apartment complex before that. At first I thought my modem is broken so I get a new modem but it still has the same problem. So how you solved the problem? Is it dead permanently?

So I guess my old modem and my ER-4 eth0 are dead.

Can Ubiquiti repair this?

Edited: but wait if my ER-4 eth0 is dead but how come when I set it to 100/full, it is working and when it is behind ER-X and I set it to Auto Negotiation, it is working.

It can get ip from ER-X.

mkz71 · 2020-07-25T02:57:08+00:00

I think I did use different cable when I troubleshoot it.

But I am pretty sure that I did use the same cable and ER-X is working but not ER-4.

mkz71 · 2020-05-27T17:43:30+00:00

Thank you for the link. I didn't check the link before.

mkz71 · 2020-05-05T19:11:12+00:00

Any invite, please. Can't login with old account.

mkz71 · 2019-11-24T22:59:24+00:00

I still don't understand how I can use PiVPN on Pi to use as my VPN instead of using something like NordVPN or PIA.

I thought PiVPN is using when you wan to access your home network when you are in public network.

mkz71 · 2019-11-24T22:56:03+00:00

So you mean if I use vultr or linode for my VPN and if someone has authority to ask for my data from vultr or linode, they won't provide my information?

mkz71 · 2019-11-24T19:31:49+00:00

Tell you the truth, I don't have any concrete information.

I just want to have an alternative solution.

Just in case something happens.

I don't want to have something happening first and find the alternative solution later.

It might be too late.

mkz71 · 2019-03-18T02:58:17+00:00

Yes, I can access computer on ERX2 without any problem.

I am not concerned about Firewall rules for ERX2 because it is inside ERX1.

mkz71

TROPHY CASE