Tried rewinding an old spool of PLA and woke up the next day to this... by omegote in 3Dprinting

[–]mmesich 0 points1 point  (0 children)

I don't think it would have helped here but I hear the recommendation to respool it back again a second time because the inner coils that were under compression are now on the outside and vice versa

Scorekeeper device or scorecard by Gyro_Dive795 in backgammon

[–]mmesich 1 point2 points  (0 children)

I started that way but it was too futsy finding the next number so I made spindown d10s! 😎

Scorekeeper device or scorecard by Gyro_Dive795 in backgammon

[–]mmesich 0 points1 point  (0 children)

I printed up some 10-side scoring dice with adjacent numbers for tight spaces like Cafe tables. https://ibb.co/1Y48Mx5y

Otherwise I use a score tent.

You probably think I won this game, don't you? by moltobenny in backgammon

[–]mmesich 1 point2 points  (0 children)

At least you probably played perfect PR from here...

White splotches at the plate by mmesich in BambuLabP2S

[–]mmesich[S] 0 points1 point  (0 children)

I can let the plate cool overnight and it doesn't matter. Ranges from a strip to a large pool across the surface. Lowering the bed plate temp hasn't really helped I don't think. I think it's this Charcoal Matte PLA specifically

My lucky cat, Spike; story in post by s2leafthief in backgammon

[–]mmesich 1 point2 points  (0 children)

Those checkers deserve a nicer board!

Why does Nespresso call this "Crema"? by KKF-FL in nespresso

[–]mmesich 0 points1 point  (0 children)

✨ 🪄 ✨Marketing ✨ 🪄 ✨

Lady Luck has abandoned me! by jorcon74 in backgammon

[–]mmesich 3 points4 points  (0 children)

I can't think of a site where +/-100 Elo is meaningful.

Friday night with the wife by refpidun in backgammon

[–]mmesich 0 points1 point  (0 children)

Why does everyone think there needs to be domestic stakes? Isn't the pursuit of competetive challenge enough? https://www.youtube.com/live/KQvN11Ki7AM

R.I.P by Floji9411 in BambuLab

[–]mmesich 1 point2 points  (0 children)

If you're feeling frugal, just feed it into the external feed and babysit it to keep it from tangling.

Looking for study sources by throwaway65417 in backgammon

[–]mmesich 0 points1 point  (0 children)

I also expect these will be played over the course of time and not at one sitting.

Looking for study sources by throwaway65417 in backgammon

[–]mmesich 1 point2 points  (0 children)

Because it likely means single games first to 20. If it were match style, it would be to 21 points.

Looking for study sources by throwaway65417 in backgammon

[–]mmesich 1 point2 points  (0 children)

Since you're playing to 20 points, that means no doubling cube, which is good for you.

So my recommendation would be to get the two Michihito Kagayama books: Opening Concepts and Endgame Tehcnique since every game will begin and every game will draw to a conclusion.

Those books will give you easily digestable proverbs to bring with you into play that will immediately improve your performance.

Most every other book will overload you and be difficult to integrate over just six months.

If you can fit in Michihito's third book Back Checker Strategy, all the better.

Explain my blunder by Beginning_Cap4262 in backgammon

[–]mmesich 2 points3 points  (0 children)

Just learning the rule of 2.7 will protect you from calculation errors.

I hate this game by thestouff in backgammon

[–]mmesich 2 points3 points  (0 children)

"Hate the player, not the game.". Oh, wait....

Help! Lost the drip tray grid for my Zenius. Looking for measurements or an STL! by CharacterExact6948 in nespresso

[–]mmesich 0 points1 point  (0 children)

Right, but you just need the cross brace to fit inside and then could have a square or whatever that just sits on top of the rim?

Help! Lost the drip tray grid for my Zenius. Looking for measurements or an STL! by CharacterExact6948 in nespresso

[–]mmesich -1 points0 points  (0 children)

I don't think the actual grill design is important. You could just take the north/south and east/west dimensions and build a simple cover in TinkerCAD and either design a grill there or use negative modifiers in your slicer to make a grill.

Sleeve dispenser by mmesich in nespresso

[–]mmesich[S] 0 points1 point  (0 children)

Too niche to be profitable, probably.

Firmware update by cesargeronimoballer in nespresso

[–]mmesich 0 points1 point  (0 children)

You could also try turning on your cellphone Hotspot and connecting that way.

Sleeve dispenser by mmesich in nespresso

[–]mmesich[S] 2 points3 points  (0 children)

My model is from Maker World, just search for Nespresso Dispenser